User's Manual

LED LIGHT UP SPORT EARBUD
Package Contents
• LED Light Up Sport Earbud x1
• Micro USB Charging Cable x1
• User Manual x1
Power On/Off
• ON/OFF Short press for pause or play / long press for on or off.
• NEXT/V+ Short press for next song / long press increase volume.
• PREV/V- Short press for previous song / long press reduce volume.
Pair Bluetooth Earbud With Your Mobile Device
• Press the on/off button for 3-5 seconds, the LED indicator will flash to blue & red to
activate the bluetooth function.
• Activate the bluetooth function on your phone within range and select
“SERIES8 BT BUD” from the list shown.
• The blue light will be flashing slowly and you will hear a “beep” sound when pairing
successful.The lighting wire will follow bluetooth LED light flashing as well.
Long press on / off button for 3 seconds can change the light mode
(light up mode / flashing mode).
• The bluetooth earbud will automatically connect with the last successfully paired
device when power on.
• Maximum volume warning voice prompts “du du”.
Note: Use the mobile phone to answer a phone call, the bluetooth earbud has NO
answer incoming call function.
• Use the micro USB cable provided with this earbud.
• Connect the micro USB plug to micro USB charging port on the earbud, then connect
the USB plug to a USB port on a computer or wall adapter to begin charging.
• The LED indicator will turn red and the light wire will light up while charging and will
turn blue once fully charged.
NOTE:
Earbud will not charge while playing music. Only charge when erabud is not in use.
You must select a qualified charger from a regular manufacturer.
You must charge the bluetooth earbud if it has been not used for more than 3 months.
Lower earbud power and / or low audio device power may cause poor operation and / or
no Bluetooth connection.
Technical Specifications
Bluetooth Version: 4.0
Frequency Response: 20Hz～20KHz
Playing Time: 1.5hours
Charge Time: 1.5hours
Maximum Bluetooth Distance: 10m
Built-in Rechargeable: 80mAh
USB Cable: 30cm
Weight In Grams: 20g
Led Light Cable: 40cm
Charging Your Bluetooth LED Earbud
Input: 5V 150mA
Bluetooth Earbud
Bluetooth Earbud will not be turned on
Earbud
Earbud
Bluetooth Earbud
Bluetooth Earbud
USB Plug Micro USB Plug
WARNING:
• Charge and operate only as indicated in this manual, as improper use may
result in damage to the product or injury.
• To avoid risk of shock or injury, do not dismantle the device or insert any
objects into the earbuds.
• To avoid electronic interference and/or compatible conflicts, turn off the
product in any facilities where posted notices instruct you to do so.
• Do not pull the earbuds charging cable. Damage may result to the cable.
• Keep out of reach of children. This is not a toy.
• Avoid exposure to moisture, liquids, heat, flame and high voltage equipment.
• Retain these instructions as they contain important information.
• Do not short circuit the input terminals of the Bluetooth earbuds.
• Do not drop, place heavy weight or allow heavy impact to the earbuds.
• Do not heat or apply heat or dispose of the in fire.
• Do not use the product while driving or crossing the road.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Keep All Relevant Information For Future Reference
User Manual
Paper:Writing Paper ; Paper Weight:0.15 Lbs
•
•
•
•
•
•
•
•
•
•
NEXT/V+
PREV/V-
ON/OFF
Micro USB
Charging Port
LED Indicator
Bluetooth Earbud
FCC statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Model：EBP-E-C130