Instruction Manual

TREBLE BASS
ECHO
MUSIC
VOLUME
MK-MC200 INSTRUCTION MANUAL
WORKS WITH MOST
KARAOKE APPS!
Output: 10W 3W*2
Frequency: 20-18000HZ （+/-3dB)
S/N: ≥80dB
Speaker: 52mm
Speaker Impedance: 4ΩDC 5V
2-IN-1 WIRELESS MICROPHONE & SPEAKER
ECHO
BASSTREBLE
VOLUME
MUSIC VOLUME
Functions and Sound Effects:
Standard Accessories:
• Micro USB cable
Overview:
MyKaraoke Pro is a combination of a
wireless Bluetooth speaker and microphone.
Use the included Micro USB Cable
to charge MyKaraoke Pro:
How to charge MyKaraoke Pro:
1. When the battery is too lo
w, MyKaraoke Pro will
power o
ff.
2. Use the included Micro USB Cable
to cha
rge MyKaraoke Pro via-any USB charger.
3. The LED indicator will light up
red while charging
and tu
rn off when fully charged.
Pairing MyKaraoke Pro:
1. Press the button on MyKaraoke Pro to power on
the mic
rophone. The LED indicator will light up blue
with a p
rompt tone .
This means MyKaraoke P
ro is ready to be paired.
2.
Turn on your phone or tablet’s Bluetooth setting.
3. Find and select
My Karaoke Pro from the device
list and wait for the tone.
Your mobile device is now
pai
red with MyKaraoke Pro.
4. See Functions & Sound E
ffects to get the best
karaoke experience.
Download App:
Download any karaoke app f
rom the iOS App store
or Google Play store and play your favorite song.
Play:
Pick your favorite song in the karaoke app
and sing along.
Note:
If only listening to music, turn the volume switch down
on the microphone to minimize feedback/noise.
Note:
Micro USB charging port is located underneath MyKaraoke Pro.
CONFIDENTIAL PRODUCTION ARTWORK
DIE CUT
DIE FOLD
K (BLAC-GRAYSCALE)
PLEAS FOLD MANUAL IN THIS ORDER
PAPER | SUBSTRAIT
CROP SIZE OF DIELINE
NOTES & REFERENCES
176.212MM X 234.95MM (6.9375” x 9.25”)
80g Paper
LIFEWORKS, LLC. [NEW YORK, NY]
DESIGNER: JERMAINE BLUM
MODEL# MK-MC200-MANUAL
DATE: 07.25.2017
2020© My Karaoke New York, NY 10018
My Karaoke is a registered trademark.
All brands are registered trademarks of
their respective companies.
For technical support call : 877-543-3540
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.Any Changes or modifications not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment. This equipment has
been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for
help.The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.