User Manual

ManualsBrandsEtekcity ManualsElectricalProfessional Digital Multimeter A1000, TRMS 6000 Counts Manual Auto Ranging, Measures Voltage, Current, Resistance, Frequency, Continuity, Capacitance, Diode Test, Temperature

12

Figure 4.2

Continuity Measurement

WARNING

Before measuring, switch off the power

supply of the circuit, and fully discharge

all capacitors.

1. Turn the rotary dial to the continuity ( )

position. [Figure 4.1]

2. Insert the black test lead into the COM terminal,

and the red test lead into the

terminal.

3. Test the test leads before measurement by

connecting the metal ends of the leads together.

[Figure 4.2] The multimeter will beep to indicate

that the test leads are working properly.

4. Connect the test leads to the object being

measured.

a. If the multimeter does not beep, the

resistance of the object is greater than 51

ohms, and the circuit is broken.

b. If the multimeter beeps, the resistance of

the object is 10Ω or less, and the circuit is

closed (good conduction status).

Figure 4.1

Hz

A

mA

µA

mV

V

V

OFF

NCV

Ω

°F°C