User Manual

ManualsBrandsEtekcity ManualsElectricalProfessional Digital Multimeter A1000, TRMS 6000 Counts Manual Auto Ranging, Measures Voltage, Current, Resistance, Frequency, Continuity, Capacitance, Diode Test, Temperature

19

1. Disconnect the test leads and turn the

rotary dial to OFF.

2. Remove the protective jacket from the

multimeter.

3. Use a small screwdriver to remove the

screw on the battery compartment cover

on the back of the multimeter.

4. Remove the old batteries. Install 2 new 1.5V

AA batteries into the compartment under

the correct polarity. [Figure 11.1]

5. Replace and secure the battery

compartment cover.

Replacing the Batteries

1.5V AA battery

Figure 11.1

Note:

• To avoid inaccurate measurements, replace

the batteries immediately when the low battery

indicator ( ) appears on the display screen.

• The multimeter requires two 1.5V AA batteries.

• Clean the multimeter with a damp cloth and

mild detergent. Do not use abrasives or

solvents.

• If you are experiencing any issues with

the multimeter, please contact Customer

Support (see page 30).

• Any calibration or maintenance must be

done by qualified professionals.

General Maintenance

Maintenance