User Manual

ManualsBrandsEtekcity ManualsElectricalProfessional Digital Multimeter A1000, TRMS 6000 Counts Manual Auto Ranging, Measures Voltage, Current, Resistance, Frequency, Continuity, Capacitance, Diode Test, Temperature

20

Replacing the Fuses

Figure 12.1

Note:

The fuses may burn out because of

overcurrent or testing voltage improperly, and the

multimeter will not work correctly. Replace any

burnt-out fuses.

1. Disconnect the test leads and turn the

rotary dial to OFF.

2. Remove the protective jacket from the

multimeter.

3. Use a small screwdriver to remove both

screws on the bottom of the multimeter.

Remove the front cover from the back

cover. [Figure 12.1]

4. Replace the old fuses.

a. F1 Fuse Specifications: 0.6A/1000V

Φ6×32mm ceramic tube

b. F2 Fuse Specifications: 10A/1000V

Φ6×32mm ceramic tube

3. Replace and secure the back and front

covers of the multimeter, and replace the

protective jacket.