User Manual

26
Range Resolution Accuracy
0.1Ω
If the measured
resistance is greater
than 50Ω, the
multimeter will read
the circuit as open,
and the multimeter
will not beep.
If the measured
resistance is 10Ω or
less, the multimeter
will read the circuit
as well-connected,
and the multimeter
will beep.
0.001V
Open circuit voltage:
about 3V.
Test current: about
1.5mA.
Silicon PN junction
normal voltage:
about 0.5–0.8V.
vii. Continuity & Diode Measurement
• Overload protection: 1000Vrms (DC/AC)
• When measuring capacitance of 100nF or
above, select relative measurement mode
(REL) to ensure accuracy.
• Overload protection: 1000Vrms (DC/AC)
Range Resolution Accuracy
6nF 0.001nF
REL mode:
±(4%+10)
60nF 0.01nF
±(4%+5)
600nF 0.1nF
6μF 0.001μF
60μF 0.01μF
600μF 0.1μF
6m
F 0.001mF ±(5.0%+10)
60mF 0.01mF ±10%
viii. Capacitance Measurement