User's Manual
Table Of Contents
- Table of Contents
- Specifications
- Safety Information
- Light Indicator Chart
- VeSync App Setup
- Configuration
- Functions
- Set Timer
- Away Mode
- Troubleshooting
- Warranty Information
- Customer Support
- Package Contents
- B-Create Schedule
- C-Create Schedule
- D-Create Schedule
- E-Create Schedule
- Create Schedule
- Product Diagram
- A-Create Schedule
- Product Requirements
- Wifi Indicator chart
- Intallation
- checking wires
- about the wires
- removing the old light switch
- installing the switch
- Indicator Lights
- Using the App
- RGB Light
- Maintaining Your Smart Dimmer Switch
- Customer Support
- Configuration
- WiFi Indicator
- Connection Schematic
- About the Wires
- Removing the Old Light Switch
- Installing the Smart Light Switch
- Installing the Smart Dimmer Switch
- VeSync App Setup
- Configuration
- Schedules
- Timer
- Smart Dimmer Switch Settings
- Share Your Smart Dimmer Switch
- Delete the Smart Dimmer Switch
- More Features
- Contact Customer Support
- Maintaining Your Smart Dimmer Switch
- Troubleshooting-1
- Warranty Information-1
- Customer Support-1
19
4. Connect the green wire to the ground wire, which is also
usually green.
5. Connect the black line wire to the line wire, which is usually
black or red.
6. Connect the red load wire to the load wire, which may be any
color except green.
7. Push the wires and the wire nuts back into the junction box.
8. Attach the dimmer switch to the wall by screwing in the
mounting screws.
9. Snap the smart dimmer switch faceplate on tightly.
10. Turn power back on at the circuit breaker, then test the
dimmer switch by turning it on.