Warranty

Operation

Countdown Function

1. Press any button to turn on the device.

2. Set the desired time by pressing the minutes (M)

and seconds (S) buttons.

3. Alternatively, press and hold the minutes (M) or

seconds (S) button for fast setting.

4. Press the Start / Stop button to start the timer

countdown. The displayed time will be flashing.

5. When the set time has elapsed, the timer will

sound a beeping alarm. Press any button to

silence the alarm.

NOTE:

• If not silenced, the alarm will continue to sound

for 1 minute before self-silencing.

• You can also adjust the volume to your liking by

using the switch on the right side of the device.

• The timer will automatically turn off after 10

minutes of inactivity.

• To clear the display at any time simultaneously

press the minutes (M) and seconds (S) buttons.

Timer Function

1. Press any button to turn the device on.

2. Press the minutes (M) and seconds (S) button

together at the same time.

3. The LCD screen will display ‘00.00’.

4. Press the Start / Stop button to start the timer.

The displayed time will be flashing.

5. Press the Start / Stop but

ton once again to stop

the timer at any time.