Smart Nutrition Scale Model: ESN00 Series User Manual Questions or Concerns? Mon–Fri, 9:00 am–5:00 pm PST/PDT support@etekcity.
Table of Contents Package Contents Specifications Safety Information Function Diagram Digital Display Setup VeSync App Setup Scale Operation Maintenance Troubleshooting Warranty Information Customer Support 3 3 4 6 7 8 9 10 14 15 17 19 2
Package Contents 1 x Smart Nutrition Scale 3 x 1.5V AAA Batteries (Pre-Installed) 1 x Quick Start Guide Specifications Weight Capacity 176.4 oz / 11 lb / 5000 g / 5000 mL Units oz / lb:oz / g / mL Increments 0.1 oz / 1 g / 1 mL Backlight Auto-Off Scale Auto-Off 30–120 seconds (adjustable in the VeSync app) 120 seconds Dimensions 9.2 x 6.3 x 0.6 in / 235 x 160 x 16.5 mm Battery 3 x 1.
READ AND SAVE THESE INSTRUCTIONS Safety Information To avoid damage to this scale, please read and follow all instructions and safety guidelines in this manual. Scale • Do not exceed the 11 lb / 5 kg weight capacity, as doing so may damage the scale. An overload indicator will appear on the LCD display if the limit is exceeded. • Smart scales are not waterproof. Do not immerse the scale in water or any liquid.
Batteries • Do not mix new and old batteries. • If the low battery indicator (“Lo”) appears on the display, replace the batteries. • If the scale is not in use for an extended period of time, remove the batteries to conserve battery life and extend the lifetime of the scale.
Function Diagram A B C D E F A. Weighing Platform B. Digital Display C. Unit Switching Button D. Power/Tare Button E. Battery Compartment F.
Digital Display A B C M M D ml g flÕ oz lb:oz E F G Calories Kcal Cal from Fat Kcal g Total Fat H Saturated Fat g Trans Fat g Cholesterol mg Sodium mg Potassium mg g Total Carbs Dietary Fiber g Sugars g g Protein A. B. C. D. Bluetooth® Icon Battery Life Indicator Weighing Mode Measurement Unit E. F. G. H.
Setup 1. Open the battery compartment on the underside of the scale. 2. If necessary, insert the included AAA batteries, making sure they are under the correct polarity as marked in the battery compartment. [Figure 1.1] 3. Replace the battery cover. 4. Press to turn on the scale. Figure 1.
VeSync App Setup Note: Due to app updates and improvements, the VeSync app may be slightly different than shown in the manual. In case of any differences, follow the inapp instructions. 1. To download the VeSync app, scan the QR code or search “VeSync” in the Apple App Store® or Google Play Store. Note: • This scale uses the VeSync app, not the VeSyncFit app. • For Android™ users, choose “Allow” (when prompted) to use VeSync. 2. Open the VeSync app. If you already have an account, tap Log In.
3. Tap + in the VeSync app and select your smart nutrition scale. 4. Follow the in-app instructions to connect your phone to your smart nutrition scale. Note: You can change the name and icon at any time in the smart nutrition scale settings. Scale Operation Tips • For accurate results, always place the scale on a hard, dry, flat surface, and keep the scale away from dirt, dust, vibration, wind, air currents, and electromagnetic interference.
Measurement 1. Press to turn on the scale. Press UNIT to select your desired measuring unit, which will show at the top of the display. [Figure 2.1] You can also change the measurement unit in the VeSync app. a. Weight: Choose between ounces (“oz”), both pounds and ounces (“lb:oz”), or grams (“g”). b. Volume: Scale measures in milliliters (“ml”). Select water (droplet image) or milk (“m” droplet image) options. Weight: Volume: press UNIT Figure 2.
2. Optional: If you’re using a container to hold the items or liquid you’re measuring, first place the empty container on the scale. Press to zero out (tare) the container’s weight (see Tare Function, page 13). 3. Gently place your item on the scale. The display will show the weight or volume. [Figure 2.2] If your smart scale is connected to the VeSync app, the weight will be synchronized with the VeSync app. 4. Press and hold for 3 seconds to turn off the scale.
Tare Function Whenever you measure liquid or items inside a container, you can use the Tare function to remove the container’s weight from the final measurement. 1. Place an empty container on the scale. The display will show the container’s weight. [Figure 2.3] 2. Press 3. Place liquid or items in the container. The scale will now measure the liquid or items, without including the weight of the container. [Figure 2.5] 4. When you’re done, reset the scale by removing all weight and pressing . .
Maintenance • Use a slightly damp cloth to clean the surface of the scale, followed by a dry, soft cloth to wipe away the remaining moisture. • You can use a dry, soft cloth to wipe dust off the scale. • Do not wash the scale or immerse it in water or any other liquid.
Troubleshooting Problem LCD display is dim. Possible Solution Scale may be on standby. Place an item on the scale for measurement, or turn off the scale by pressing and holding for 3 seconds. Replace the batteries. LCD display shows “Lo”. Battery is low. Replace the batteries. Replace the batteries. Scale does not turn on. Insert batteries under the correct polarity as marked in the battery compartment. Make sure your mobile device is within 30 ft / 10 m of the scale.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Warranty Information Product Model Smart Nutrition Scale ESN00 Series TERMS & POLICY Etekcity Corporation (“Etekcity”) warrants this product to the original purchaser to be free from defects in material and workmanship, under normal use and conditions, for a period of 2 years from the date of original purchase.
This warranty does not extend to products purchased from unauthorized sellers. Etekcity’s warranty extends only to products purchased from authorized sellers that are subject to Etekcity’s quality controls and have agreed to follow its quality controls. All implied warranties are limited to the period of this limited warranty. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
Customer Support If you have any questions or concerns about your new product, please contact our helpful Customer Support Team. Etekcity Corporation 1202 N. Miller St., Suite A Anaheim, CA 92806 Email: support@etekcity.com Toll-Free: (855) 686-3835 Support Hours Mon–Fri, 9:00 am–5:00 pm PST/PDT *Please have your order invoice and order ID ready before contacting Customer Support. Attributions The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
Connect with us @Etekcity 01.
