DX900 User Guide
Safety Instructions Please Read Before Proceeding Avoid heavily pressing on the touch screen. Avoid heavily pressing on the touch screen with the stylus or your fingers. This product is not charged when shipped from the factory. When you use this product the first time, we recommend that you install the battery as illustrated and fully charge it for about 8 hours before use. Do not remove the battery while charging.
Where to Find Information For information on: See this source: Programs on your Pocket This User’s Guide and Pocket PC Help. To view PC Help, Help tap Additional programs that The Pocket PC Getting Started CD. > Help. Help can be installed on the Pocket PC Connecting to and Check the user’s guide that comes with this synchronizing with a product or look for the online help relevant to desktop computer synchronization tools on the desktop PC or the Pocket PC.
Trademarks and Copyright Copyright © 2008 Acer Incorporated. All Rights Reserved. Trademarks and trade names mentioned in this document are those of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Acer Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Contents 1 Getting Started / 1-1 PACKAGE CONTENT ..................................................................... 1-1 EXTERNAL VIEWS ......................................................................... 1-2 HARDWARE HOTKEY FUNCTIONS .................................................... 1-4 SIM CARD(S) ............................................................................. 1-6 Installing the SIM Card(s) ..................................................... 1-6 Removing the SIM Card(s).......
Managing Dual SIM Cards on a Single Device .................... 2-21 Flight Mode ....................................................................... 2-22 ENTER INFORMATION ON YOUR POCKET PC .................................... 2-23 Enter Text Using the Input Panel ........................................ 2-24 Write on the Screen ........................................................... 2-28 Draw on the Screen ........................................................... 2-30 Record a Message............
5 Customize Your Pocket PC / 5-1 ADJUSTING SETTINGS.................................................................... 5-1 NOTIFICATIONS ........................................................................... 5-2 POWER PREFERENCE SETTINGS ........................................................ 5-3 BACKLIGHT ................................................................................ 5-4 LIGHT SENSOR.............................................................................
Setup the Bluetooth Connection .......................................... 7-9 INTERNET SHARING..................................................................... 7-13 CSD TYPE................................................................................ 7-14 CONNECTING WITH A PERSONAL COMPUTER ................................... 7-15 WIRELESS LAN TRANSMISSION ..................................................... 7-15 8 Using Wireless Wireless LAN / 8-1 CONNECTING TO WIRELESS LAN .....................
10 Multimedia / 1010-1 USING CAMERA ........................................................................ 10-1 Pocket PC Exterior and Camera.......................................... 10-1 How to Use the Camera?................................................... 10-3 Common Tools for Camera................................................ 10-7 Common Tools for Camcorder......................................... 10-10 Advanced Setup for Camera or Camcorder...................... 10-12 ALBUM................
EXCEL MOBILE ........................................................................ 11-18 Tips for Working in Excel Mobile ...................................... 11-20 POWERPOINT MOBILE ............................................................... 11-21 WINDOWS MEDIA PLAYER......................................................... 11-22 STREAMING PLAYER ................................................................. 11-24 INTERNET EXPLORER ...............................................................
Application Settings Page................................................... 13-8 Music Settings Page ......................................................... 13-10 Digit Training Page........................................................... 13-12 Digit Settings Page........................................................... 13-14 Advanced Settings Page................................................... 13-15 FAQ.....................................................................................
1 Getting Started / Package Content Pocket PC, stylus, battery, Getting Started CD, Quick Start Guide, AC adapter, USB cable, headset, leather case.
External Views 789 21 22 23 24 6 5 1 16 2 10 17 3 18 19 4 11 12 13 20 15 14 1. Strap holder 2. Volume control key 3. Record key / Voice Commander 4. Headset connector hot key 5. Light sensor 6. Video conference camera 7. Bluetooth / WLAN / GPS LED 8. Phone Receiver indicator 9. Charging / Mobile Phone LED 10. 10 Display, Touch screen indicator 1-2 11. 11 SEND button 12. 12 Navigation pad 13. 13 END button 14. 14 Microphone 15. 15 Mini USB connector 16.
17. 17 RESET button 18. 18 MicroSD slot 19. 19 Camera hot key or Camcorder 20. 20 Stylus holder 21. 21 Camera lens 22. 22 Preview mirror 23. 23 Flashlight LED 24. 24 Speaker 25.
Hardware Hotkey Functions Hardware Button 1 2 3 Short Press (Press once and release) Adjust volume Record / Voice Commander Phone / dial / redial / Long Press (Press and hold for a few seconds and release) -- Notes Telephone hold answer 4 Hang up during call Disconnect during GPRS connection Skip to Today screen Turns off the phone function Turns on the phone function while in other programs 5 1-4 Turn on/off screen, enter Enter Power off mode of the the Sleep m
Hardware Button 5 +6 Short Press (Press once and release) POWER button + RESET button Long Press (Press and hold for a few seconds and release) -- = Cold boot 6 RESET button -- 7 Camera or Camera Shutter -- 1-5
SIM Card(s) Your device is designed for operating two SIM cards simultaneously, so you can receive and make calls on either number. Both the SIM card slots are capable of carrying GSM SIM cards. The slot on the right is dedicated for GPRS/3G compatible SIM card. To make video calls or send an MMS message, please make sure your GPRS/3G SIM card has been installed in SIM1 SIM1 card slot correctly. Installing the SIM Card(s) 1.
Removing the SIM Card(s) 1. Disconnect the USB cable or AC adapter if either of them is connected to your Pocket PC. 2. If the battery is installed, turn off the device and remove the battery. 3. With a small amount of pressure, plug your stylus tip a bit into the hole on the top of SIM slot, use it to hook the SIM card edge until it loosens from the SIM card holder. 4. Use your finger to slightly slide the SIM card out of the card slot.
Battery Using the Pocket PC for the First Time If you are opening this product for the first time, the main battery and the Pocket PC are packed separately inside the product package. Installing the Battery 1. Turn over the Pocket PC and remove the back cover. 2. Place the battery in the back of Pocket PC. Make sure that the golden contacts are aligned to the battery box. 3. Gently insert the battery until it clicks. 4. Replace the back cover.
Removing the Battery 1. If the phone, GPRS or wireless LAN connection function is already activated, deactivate it first and then replace the battery. 2. Disconnect the USB cable or AC adapter if either of them is connected to your Pocket PC. The removal of SIM card or battery while the Pocket PC is connected with a USB cable or AC adapter may damage your device. 3. Turn over your Pocket PC and remove the back cover. 4. Remove the battery.
Charging Power and Power Supply Connect the AC adapter plug to any household power outlet. Connect the other plug from the AC adapter to the USB port. The Pocket PC starts to charge automatically. If you need to connect Pocket PC and desktop computer, you could connect the USB cable to the USB port. And then connect the other end of the USB cable to the USB port on the desktop computer. Your Pocket PC will also charge at the same time. But don’t remove the battery while charging.
1. It will take about 8 hours to fully charge the battery after the first time you open the package. Subsequent charging will only take about 3 hours. After charging, you can disconnect the AC adapter and carry the Pocket PC around portably. To maintain smooth operation, charge the power regularly. 2. View the battery icon on the upper right corner to check the power usage condition. 3. The LED indicator on the top of the Pocket PC will indicate the various functions that are currently in use.
Getting Started Getting Started Started provides you with basic concepts and shortcuts to certain primary features and settings. Tap > Programs > Getting Started. Started 1 Tap a subject to view how to get started. 2 Tap hyperlink to execute the specified command. 3 Tap Back to return to the Getting Started main screen.
Power On and Off POWER button 1 .Press and hold the POWER button on the Pocket PC and then tap Yes to turn off the Pocket PC. All functions will be disabled; this is not the same as entering Sleep mode. 2 .To turn on, simply press the POWER button once.
Using the Stylus to Touch the Screen Your Pocket PC is designed for graphics-based operation. Generally speaking, we usually “use the stylus to perform basic actions such as tap, drag, and tap and hold” on the touch screen. Other actions such as reset and cold boot will require the use of the stylus tip. Pull the stylus to full-length to make it easier to tap the screen during operation. When kept completely in the stylus holder, the stylus length shortens.
Turn on the Screen This product is designed with a power-saving feature. If the screen is turned off, press the POWER button of the Pocket PC to turn it on. If the screen is too dark and you cannot see clearly, set the proper brightness level for the backlight. Tap > Settings > System tab > Backlight > Backlight Level tab.
Restarting the Pocket PC Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen. For your consideration, factoring into your safety and convenience, please refer to the following instructions in order: Reset Press the RESET button of Pocket PC with the tip of the stylus.
Reset Reset method: Press the RESET button of Pocket PC with the tip of the stylus. Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen. Result: In a moment, when Pocket PC automatically completes the system startup process, the last display will be the Today screen. This will retain the Microsoft Windows, factory pre-installed applications, and user’s input data, newly installed programs, and user custom settings.
Default Settings Tap > Programs > Utilities > Default Settings Settings. ngs 1. If this application is inadvertently accessed, please select the to the upper right of the screen to exit, the system will not be affected. 2. If you are certain that you wish to perform this action, please select the data input block on the right, and enter the authorized code in the block to the left. Then tap OK.
Clean Boot Cold boot method: Press and hold both POWER button and RESET button for a while, then release them simultaneously. Wait for a few seconds until the screen wakes up displaying the model name, firmware version and firmware build date of your device, instantly press and hold . Appropriate situation: If a previous reset has already been attempted and the Pocket PC is still unable to maintain normal operations, has no response, or if the screen is frozen.
The operation “Erase Erase all data and load default?” default? will delete all the data you stored on your device and restore it back to factory default settings. If you press upon seeing the line “Yes Yes [press CAMERA button]” button] at the bottom of screen, all the data you stored, programs you installed and customized settings you made on this device will all be cleared. Follow the onscreen instructions to complete the resetting after the device reboots.
2 Using the Pocket PC / Start Screen Tap >Settings Settings > System tab > Screen. Screen The first time you use or cold boot the pocket PC, the system will ask you to align the screen. Kindly continue to tap the center of each cross (+ +) that appears and follow the screen instructions to complete the operation. If you feel that the position is not quite accurate while tapping on the screen, you follow the help for this section to align the screen again.
The following steps will bring you into the touch screen calibration mode. These steps provide a faster and more efficacious way to enter the touch screen calibration mode. And they also provide a method of getting into Screen program for when the touch screen dislocation is so severe that you completely cannot select or do anything using the stylus. 1. Simultaneously press on the bottom-left of the Pocket PC and the execution button in the center of the navigation pad. 2.
Today Screen When you turn on your Pocket PC for the first time each day (or after 4 hours of inactivity), you will see the Today screen. You can also display it by tapping > Today. Today On the Today screen, you can see at a glance the important information for the day. to switch to a program. Start Start.,tap Connection status icons, tap to view the connection details. Speaker icon. For adjusting volume. Current battery status.
The following table lists the icons that you may see on the Navigation Bar. Kindly refer to the “Meaning” column for explanation or tap on the icon to access the instant message.
Icon Meaning (Located on the Navigation Bar at the top of the screen) Missing SIM1 card Missing SIM2 card Phone1 is turned off. Phone2 is turned off. Phone1 is turned on. Signal strength. Phone2 is turned on. Signal strength. Phone1 has not yet detected signal Phone2 has not yet detected signal No service. Phone1 has not yet connected to a network. No service. Phone2 has not yet connected to a network. Phone1 is searching for signal. Phone2 is searching for signal.
Icon Meaning (Located on the Navigation Bar at the top of the screen) GPRS not in use GPRS available GPRS connected Synchronizing over GPRS in use EDGE available EDGE connected Synchronizing over EDGE in use 3G network available 3G connected Synchronizing over 3G in use 3.5 G network available 3.5 G connected Synchronizing over 3.5 G in use represent the availibility of various data connection services provided by SIM card you installed in SIM1 slot.
Programs You can switch from one program to another by selecting it from the menu. (You can customize which programs you see on this menu. For information, see “Adjusting Settings” section.) To access some programs, you’ll > Programs, Programs and then the program name.
Icon Programs Description Internet Explorer Browse Web and WAP sites, and download new programs and files from the Internet. Windows Live MSN related programs. Messenger Send and receive instant messages with your MSN contacts. Calculator Performs basic calculations. Pictures & Videos Take, view, and edit pictures. Windows Media Plays movies or sound files. Streaming Player Playback video or audio files from RTSP, HTTP etc.
System Application Programs Tap > Settings > Personal tab Program Description Buttons Set the hot key for Pocket PC hardware button. Input Set the details about the input method. Lock Set the access rights and password of Pocket PC. Menus Set the items displaying on the Owner Information Input owner information. Phone Set the details about the phone. Phone2 Set the details about the phone2. Sounds & Notifications Set the volume and notification method.
Tap > Settings > System tab Program Description About Display the important information about the Pocket PC. Backlight Set the details about the backlight and brightness. Certificates For network identification to prevent unauthorized access. Clock & Alarms Set the time and alarms. Gravity Sensor The built-in gravity sensor is able to recognize how your Settings hand manipulate this device and change the screen orientation accordingly.
Tap > Settings Settings > Connections tab Program Beam Description Set if receiving end will accept beam data automatically or not. Bluetooth Establish the connection between the Pocket PC and other Bluetooth capable devices. Comm. Manager Manage the connections of your device. Connection Wizard Select the appropriate country and carrier name. Connections Set the network connection. CSD Type Set Pocket PC to simulate a modem and access the Internet through the built-in GSM device.
Spb Mobile Shell Spb Mobile Shell has easy to use functions and tools to keep your Pocket PC organized for quick access. The program consists of the main window panels (Now Now Screen, Screen Spb Menu, Menu Speed Dial), Dial Quick panel (smart taskbar gestures), Spb Contacts (smart contact search), Task Manager, color based themes, and improved usability for device locking. Starting Spb Mobile Shell On the Today screen, tap Spb Shell to quick link to Spb Mobile Shell.
2. To return to the Today screen or the last active application, the following methods are available. Slide your finger in a downwards gesture. Tap .
Using Spb Mobile Shell 1. Now Screen panel: The Now Screen gives you a quick and easy way to check your device status. Tap to select a city or open the weather details panel where you can update forecast or access the weather options. Tap to adjust the phone profiles on your Pocket PC. Three icons for e-mail, SMS, Voice mail, and missed calls. For example, when you receive an e-mail you will see the e-mail icon highlighted with the number of new e-mails you have in your inbox.
2. Spb Menu panel: Spb Menu consists of two parts, smart launcher at the top (12 shortcuts) and six large phone style menu items below. Tap to quick link. The six large menu items not only show you what you have already on your Pocket PC but it also adds very useful tools under some categories. Use the left/right gesture to switch between the main window panels. Tap soft keys to switch between the main window panels. Tap to quit.
3. Speed Dial panel: The Speed Dial allows you to add up to sixteen photo contacts of your choice. You can also add a shortcut to the Spb Contacts on the panel. Add your favorite contacts to the Speed Dial panel (applies only to entries stored in Contacts on your Pocket PC). Tap the photo, name, or number of the contact whom you want to call. Use the left/right gesture to switch between the main window panels. Contacts Tap to link to Spb Contacts.
On the Speed Dial panel, tap the photo, name, or number of the contact whom you want to call. The contact panel of your selected contact is then displayed. Select one of the phone numbers that you want to dial or send a text message. Tap Open to view the contact full details card. On the Speed Dial panel, tap . The Spb Contacts panel is then displayed.
Configuring Spb Mobile Shell On the Spb Menu panel, tap Settings category > Spb Mobile Shell. Shell Tap > Settings > System tab > Spb Mobile Shell. Shell 1. Now Screen tab: Customize options on your Now Screen display. Show the Now Screen when device wakes up: Enable this option to show the Now Now Screen each time you wake your device from te standby mode. 2. Advanced tab: Customize Spb Menu and Now Screen advanced options. 3.
Communication Manager Communication Communication Manager will assist you to manage the wireless connections of the Pocket PC including Phone1, Phone1 Phone2, Phone2 Bluetooth, WiFi and data connection. You can access Communication Manager by these methods: On the Today screen, tap. On the Today screen, tap the connection status icons on navigation bar, when the message window appears, tap Comm. Manager. Tap > Programs > Comm.
Switching a Connection On / Off On Communication Communication Manager screen, single tap on these buttons to activate or disable each individual functions. The icon indicates that the associated function is currently in the off state. For example, tap , when it becomes , the GPRS connection is available. Tapping these buttons will turn the icons orange, indicating that these functions are newly activated. To turn off these functions, simply tap on the buttons once again.
Managing Dual SIM Cards on a Single Device You can have two numbers activated simultaneously on this device as if carrying two cell phones. Every time you call out or send a message, you may choose the network at the most economical rate while receiving with the other number freely. In Communication Communication Manager, Manager tap Phone1 or Phone2 icon to activate the SIM card you have installed in the corresponding slot.
Phone1 Phone1: Connection status of SIM stored in SIM1(3G ) slot. As the SIM is successfully activated, the telephone receiver symbol will turn from dim grey to glowing orange, and you may receive incoming calls and messages on this number Phone2: Phone2 Connection status of SIM stored in (SIM2)2G slot. When the text “Phone1”/ ”Phone2” is in orange, it indicates this number is currently selected to send outgoing calls when you press .
Enter Information on Your Pocket PC You have several options for entering new information: 1. Use the input panel to enter typed text, either by using the soft keyboard or other input method. 2. Write directly on the screen. 3. Draw pictures on the screen. 4. Speak into your Pocket PC microphone to record a message. 5. Use synchronization tools to synchronize or copy information from your desktop computer to your Pocket PC. For more information, see Help on your desktop computer.
Enter Text Using the Input Panel Use the input panel to enter information in any program on your Pocket PC. You can either type using the soft keyboard or write using Letter Recognizer, Recognizer Block Recognizer, Recognizer or Transcriber. Transcriber In either case, the characters appear as typed text on the screen. To show or hide the input panel, tap the Input Panel button. Tap the arrow next to the Input Panel button to see your choices. Select an input method. Tap to see your choices.
Tap here if this is the right word. Note To change word suggestion options, such as the number of words suggested at one time, tap > Settings > Personal tab > Input > Word Completion tab.
Type with the Soft Keyboard 1 Tap the arrow next to the Input Panel button and then Keyboard. Keyboard 2 On the soft keyboard that is displayed, tap the keys with your stylus. Use Letter Recognizer With Letter Recognizer you can write letters using the stylus just as you would on paper. 1 Tap the arrow next to the Input Panel button and then Letter Recognizer Recognizer. ognizer 2 Write a letter in the box. When you write a letter, it is converted to typed text that appears on the screen.
Use Transcriber With Transcriber you can write anywhere on the screen using the stylus just as you would on paper. Unlike Letter Recognizer and Block Recognizer, Recognizer you can write a sentence or more of information. Then, pause and let Transcriber change the written characters to typed characters. 1. Tap the arrow next to the Input Panel button and then Transcriber. Transcriber 2. Write anywhere on the screen.
Write on the Screen In any program that accepts writing, such as the Notes program, and in the Notes tab in Calendar, Calendar Contacts, Contacts and Tasks, Tasks you can use your stylus to write directly on the screen. Write the way you do on paper. You can edit and format what you’ve written and convert the information to text at a later time. Write on the Screen Tap Menu and then check Draw to switch to writing mode. This action displays lines on the screen to help you write.
Select Writing If you want to edit or format writing, you must select it first. 1. Tap and hold the stylus next to the text you want to select until the insertion point appears. 2. Without lifting, drag the stylus across the text you want to select. If you accidentally write on the screen, tap Menu, Menu then Undo and try again. You can also select text by tapping Menu and then Draw to deselect it and then dragging the stylus across the screen.
Draw on the Screen You can draw on the screen in the same way that you write on the screen. The difference between writing and drawing on the screen is how you select items and how they can be edited. For example, selected drawings can be resized, while writing cannot. Create a Drawing Cross three ruled lines on your first stroke. A drawing box appears. Subsequent strokes in or touching the drawing box become part of the drawing. Drawings that do not cross three ruled lines will be treated as writing.
Select a Drawing If you want to edit or format a drawing, you must select it first. Tap and hold the stylus on the drawing until the selection handle appears. To select multiple drawings, tapping Menu and then Draw to deselect it and then drag to select the drawings you want. You can cut, copy, and paste selected drawings by tapping and holding the selected drawing and then tapping an editing command on the pop-up menu, or by tapping the command on the Menu menu.
Create a Recording 1. Hold your Pocket PC’s microphone near your mouth or other source of sound. 2. Press and hold the Record hardware button on your Pocket PC until you hear a beep. 3 While holding down the RECORD button, make your recording. 4 To stop recording, release the RECORD button. Two beeps will sound. The new recording appears in the note list or as an embedded icon. Note You can also make a recording by tapping the RECORD button on the Recording toolbar.
Voice Commander By default, the system sets the button on the side of the Pocket PC as the “Voice Voice Commander button.” Press this button to launch the Voice Voice Commander button Commander. Commander For details on how to use this function, please refer to the Voice Commander section.
2-34
3 Voice Command and Satellite Navigation / Navigation Device Installation Pocket PC Car Charger (* optional): when Pocket PC is low on power, recharge by connecting one end to the car cigarette lighter/12 volt power outlet and the other end to the socket on base of Pocket PC. Attention: Attention The GPS signal receiver is built into the Pocket PC. If car windscreen has heat reflective metallic film, or Pocket PC is obstructed by objects, then the receptivity of the GPS will be adversely affected.
GPS Navigation Software Installation Please follow your car navigation system operating manual’s instructions on software installation in order to use the navigation function. Conditions for Using GPS Car Navigation By using this system you are agreeing to the following conditions: 1. When using this device, please use with matching car mounts. Affix device securely to the car mount. Please be aware that installation in the areas depicted below is forbidden and is strictly prohibited.
2. Please set navigation destination before driving. Do not operate this system while driving. 3. Please use this system with care. If any harm results from careless use of this system, the responsibility for safe driving resides with the driver. 4. GPS positioning is limited by weather and usage location (tall buildings, tunnels, underpasses, trees, bridges). Most GPS do not work indoors, nor can GPS signals penetrate buildings, car sun shades and heat reflective film with metallic content.
Satellite Data Update (Not supported in USA) Tap > Programs > GPS > Satellite Data Update. Update Login to the provider’s server to download instant satellite data and enable the GPS function. Note: either of the following connections allows your Pocket PC to download the latest GPS data. If there is more than one connection available, the system will automatically select the best connection, in the following order: 1. Synchronization connection: Connect your Pocket PC to a PC (Desktop or Notebook).
Tap the Download button to update the GPS data manually. The figure on the left shows how to download using the synchronization connection. Tap the Setting button in the Satellite Data Update Update main screen to open the dialog in the left figure. Check the expiration checkbox to activate the reminder function on the due date. The default value is checked. The system will automatically update the data when online.
1. Synchronization connection. Make sure that your Pocket PC is connected to the PC, and that the PC is online. 2. Wireless LAN connection. 3. GPRS connection. When the GPS data has expired, the relevant message displays on the top of the screen. The icon reminds you that your GPS data has expired. Tap the Notification button to open the message window. Tap to close the message window.
Location SMS Tap > Programs > GPS > Location SMS. SMS You can utilize the GPS function offered by your Pocket PC, to send the matching location automatically found by this program and the necessary message to your contacts. This could be helpful in preventing kidnapping, reporting disastrous situations, calling for help in emergencies or locating an individual. In addition, we have formulated many SMS templates based on different situations for your convenience. 1.
1. Select in the main screen, once in the screen shown on the left, tap on any message and tap OK button to select. 2. Further, by pressing and holding anywhere on the screen, together with the pop-up menu, you can add, edit or delete your most used messages. 3. The content of the message that your recipient views looks similar to what is shown on the left. Actual messages differ depending on the recipient’s device.
GPS Viewer Tap > Programs > GPS > GPS Viewer. Viewer You may use this Pocket PC to automatically search the GPS coordinates of your location and check if the GPS functions work properly. 1. Run this program in a location with good signal reception. Greenwich Mean Time (GMT): After connecting to a satellite and obtaining the GMT, it will be displayed on the screen. Tap to set the satellite time as the system time. Report GPS tracking information. Tap to change the unit.
3-10
4 Using the Phone / The Phone feature on the Pocket PC allows you to perform the following tasks: Capability of carrying dual SIM cards. 3.5 G video telephony. Make and receive calls. Quickly make calls or listen to voice mail without entering phone numbers using Contacts, Contacts Speed Dial, Dial or your Call Log. Log Check the Call Log to see who has called, whom you have called, add a new number to Contacts, Contacts and access notes taken while you were on a call.
the icon turns orange , the Flight Mode is activated and the wireless connection of the Pocket PC is disabled. The Phone function relies on the Pocket PC main battery for power. Maintain the main battery power level to assure call quality and the normal operation. Microphone Earphone Phone Receiver Phone Speaker (Bottom of Pocket PC) Precautions! Avoid wearing earphones at high volume for extended periods of time.
Combination Method Operation Answer or Adjust Earphone End a Call Volume Hold the Hold the Pocket Press Pocket PC PC and position on the lower part of While answering a or call, push the manually for the receiver close the Pocket PC. volume control calls to your ear and key on the side of the speaker close the Pocket PC to to your lips. test the earphone volume. Install the Place the external earphone in your function.
Adjusting the Phone Volume Tap on the top and adjust all . programs’ sound functions under Adjust the phone sound volume under . 1. When there is no call, you can push the volume control key on the side of the Pocket PC or use the stylus to tap the speaker icon Tap and then to adjust the ring volume of the incoming call. 2. Push the volume control key on the side of the Pocket PC or tap and then to adjust the phone volume. You can only do this during a call. 3. Vibration mode: The speaker icon 4.
Phone Functions Turning on Your Phone(s) Before using phone functions, please install you SIM card(s) and turn the phone(s) on. 1. On the Today screen, tap or , when the message window appears, tap Comm. Manager. Manager to launch Communication Manager. 2. Or tap Manager 3. In Communication Manager, Manager tap the phone your desire, and follow the onscreen instructions to activate it. You may be requested to enter a preset t PIN (Personal Identification Number) which is usually a four-digit code.
Making a Call On the Today screen, tap > Phone or press . To make a call, use the screen keypad to enter the phone number and tap to place the call on Phone1 or to place the call on Phone2. Phone2 Phone1 Service provider name Phone2 Service provider name Contacts display area List of people you lately contacte d with.
Note If only one SIM number on your device is activated, this number will be the primary number when you make calls, and Phone Dialer Selection is thus enabled. Making a call on either number You can always select your desired number to make a single call at will. If selected, the service provider name of this number will turn orange on the Today screen.
Tapping to place the call on Phone1 or to place the call on Phone2. Phone2 Or Pre-assigning one of your two numbers as the primary number to make outgoing calls: Tap Menu > Phone Dialer Selection and choose the phone line, then you’ll only have to press to make a call on this selected number. Note If you tap or without activating the corresponding SIM beforehand, you will be asked to complete the activation process in order to make this call.
Making a call from Call History On the Phone screen, tap Call History . 1. To sort out call entries by different methods, tap Menu and then Filter to list the categories. 2. Find the number you wish to call, tap Call or press to call using the current selected number. You can tap Menu > Phone Dialer Selection to change the current selected number.
3. To view the number of calls, call time and manage call records, tap Menu and then Call Timers Timers.
Answering / Ignoring a Call Upon receiving an incoming call, a window will pop up. 1. To answer this call, tap Answer or press . 2. To ignore this call, tap Ignore. Ignore The headline shows which phone on your device is being called.
Note If a call enters one SIM number while the other SIM number is already on a call, a pop-up window will inform you of the new incoming call, tap Answer to answer it, which will hang up the previous call in the meantime; or tap Ignore to hang up the new incoming call. Ending a Call During a connected call, you can tap End or press to hang up. As a screen of Last Call detail shows, you can tap Talk1 or Talk2 to redial to this contact.
Video Call Video Call enables you to see a real-time, two-way video of the other party during a call. To establish an instant video call with your device, make sure: You are using a 3G SIM card in the coverage of network. The other party is equipped with a compatible device and service system. Making Making a video call call 1. On Phone screen, Select your contact and tap Menu > Video Call. Call 2.
Carrier name and talk time Incoming / Outgoing call number Return to voice call keypad Video screen of your contact Video screen of yourself Video call control panel: Stop sending your video Switch to front/rear camera lens Video brightness Mute / Unmute microphone Chang the layout of both party’s screen End the video call 4. To end the call, simply tap 4-14 on the Video Call main menu.
Receiving Receiving a video call Upon receiving a video call, a window pops up to notify you that this is an incoming video call. If you tap Answer, Answer your device will start sending your image to your recipient, tap to stop showing the other party your image during the call. Note 1. Please insert your 3G SIM card in SIM1 slot, and activate Phone1 before making or receiving a video call. 2. If the video call dial out is unsuccessful, it is possible to switch to normal voice calls. 3.
Customizing Your Phone You can enter the Phone or Phone2 settings page from > Settings > Personal tab on the Today screen to modify the relevant service settings. Note that the setup values you can change here depend on the services provided by your telephone company. If you choose the phone that is not currently activated, you will have to activate it before entering the settings page. You can set the ring type as ring, vibration or mute.
Phone Application Programs Caution Before you can use the functions described in the Phone Group. Make sure that the SIM card is properly installed in your Pocket PC and the Phone is already turned on. If your Pocket PC does not include this function, it means it is not supported and you can skip this chapter. SIM Manager You can use SIM Manager to manage contact entries stored on your SIM cards, edit and copy contacts from SIM cards to your device, or vice versa. Tap > Programs > Phone > SIM Manager.
Change Display Mode You can change the display mode of SIM Manager to Standard, Standard SIM1 Contacts, SIM2 Contacts and Outlook Contacts. Contacts When switching to SIM1 or SIM2, SIM2 the full screen display for SIM card phonebook or Contacts will be as shown as per the illustration below. This will enable the phonebook contacts to be easier to read and more precise management can be conveniently performed.
SIM Tool Kit Tap > Programs > SimTKUI (SIM Tool Kit). This screen will list only the service menu offered by SIM1 which you installed in SIM1 slot. This screen is for reference only. The actual screen is based on the service items provided by your telecom company. Tap any service item. Select button: Launch service item. Follow the screen or voice instructions.
SMS Sender Tap > Programs > Phone > SMS Sender Sender SMS Sender is a shortcut for you to directly start editing a new text message and send it out. To send a text message, on message composing screen: 1. Enter the recipient’s number in To field, or tap Menu > Add Recipient to select a person from Contacts Contacts. ntacts 2. Enter the content of your message in text field. 3. Tap Send 4. On Send via screen, choose the SIM number that you’ll use to send this message.
Speed Dial Tap > Programs > Phone > Speed Dial. Dial Hot Key Switch Tap the box according to the functions provided by the system. Tap to switch between these functions: Frequency Dial → Index Dial. Dial Tools button: Provides the relevant menu. For example, select Settings to set the interface as Frequency Dial or Index Dial Dial. al Select Sound on/off to set the sound for tapping the screen. Tap Tools and then Color and Text to enter the Setting screen shown on the left.
Frequently Dialed Screen Frequency Dial screen Tap any phone entry box to speed dial. You will make a call on the number currently selected by your device. To select the other number, press to enter Phone screen, tap Menu > Phone Dialer Selection Tap and hold the box, then select appropriate command from the pop-up menu. Sort according to the number of calls in descending order. The upper left corner has the most number of calls while the lower right corner has the least number.
Index Dial Index Dial screen Switch to the Index Dial screen as shown on the left. Tap on any letters. The content displayed are the data created in Contacts. Contacts If you did not create any data in Contacts, the screen is blank. The letter “F” appears on the upper left side of the screen (see left). This indicates that this page contains all address data that starts with “F”. The English Address Book is arranged alphabetically using the First Name. Tap any box to speed dial.
4-24
5 Customize Your Pocket PC / You can adjust the Pocket PC settings according to your personal preferences and install other programs. Adjusting Settings To see available options, tap > Settings > Personal or System tab located at the bottom of the screen. The following utilities allow you to adjust the settings based on your personal work style.
Notifications Your Pocket PC reminds you in a variety of ways when you have something to do. For example, if you’ve set up an appointment in Calendar, Calendar a task with a due date in Tasks, Tasks or an alarm in Clock & Alarms Alarms, ms you’ll be notified in any of the following ways: A message box appears on the screen. A sound, which you can specify, is played. A light flashes on your Pocket PC. The Pocket PC vibrates.
Power Preference Settings Tap > Settings > System tab > Power. Power View the power usage condition or perform the relevant power management settings. Power icon Check this item, so that when you accidentally press the hardware buttons on the Pocket PC, the Pocket PC will not exit the sleep mode. This will prevent unnecessary power consumption if a button is being pressed accidentally and not being discovered in time.
Backlight Tap > Settings > System tab > Backlight. Backlight 1. Battery Power or External Power tab: Set the relevant backlight functions. 2. Backlight Level tab: Adjust the backlight level.
Light Sensor The unique light sensor within your Pocket PC enhances the accuracy of onscreen view and decreases your eyestrain while saving on more battery life. Based on the ambient light intensity the sensor detected, it will adjust backlight brightness dynamically. The lighter the environment is, the more illumination the device outputs to brighten the screen; in a dusky place like a tunnel, the device dims the screen a bit to reduce power consumption.
Gravity Sensor The gravity sensor in your Pocket PC is able to recognize its own orientation manipulated by your hand, and would so change the screen orientation accordingly. For example, if you position the device vertically and then turn it into a horizontal orientation, the screen mode will then change from portrait to landscape automatically. Tap > Settings > System tab > Gravity Sensor. Sensor Tap to save settings.
Microphone Profile Microphone Cause * Voice Turn the volume down and Surrounding Commander find the proper volume setting interference recorded voice control for better recognition of when volume up. system. Speech Turn the volume up. More distance from recording the lecturer more interference recorded. * Used for the version built in “Voice Voice Commander.” Commande Tap > Settings > System System tab > Microphone. Microphone 1. Use the slider to adjust volume of the recording mic. 3.
Adjust Volume Push the volume control key on the side of the Pocket PC. Or use the stylus to tap the under icon on the top of the screen to adjust all program sound functions . Adjust the incoming call’s volume under . 1. Adjust volume: When set to On, On use the stylus to tap and drag the slider up and down to adjust the volume. You can also push + or - on the side of the Pocket PC. 2.
Memory Optimization Tap > Programs > Utilities > Memory Optimization. Optimization Memory Memory Optimization helps you to optimize the memory using in your Pocket PC. 1. Enable the auto-restart option and select the timer. Your Pocket PC will automatically restart. 2. Select the least memory. Your Pocket PC will restart when the memory is less than your settings.
Scenarios Tap > Programs > Phone > Scenarios Select an applicable mode. Details button: Set the relevant options for this mode, such as volume, backlight, etc. Tap Details button to enter the screen shown on the left. And then tap Settings button to set the relevant options for this mode, such as volume, backlight, etc.
Find and Organize Information The Search feature on your Pocket PC helps you quickly locate information. 1. Tap > Programs > Search. Search Input the text you want to find and then select the data type. Tap on Search to start the search. 2. To find information that occupies a larger space, select Larger than 64 KB for Type. Type Actually, you can use File Explorer to search for files and place these files into folders systematically. Just tap > Programs > File Explorer.
Navigation Bar and Command Bar The navigation bar is located at the top of the screen. It displays the active program and current time, and allows you to switch to programs and close screens. Use the command bar at the bottom of the screen to perform tasks in programs. The command bar includes menu names, buttons, and the Input Panel button. To create a new item in the current program, tap New. New To see the name of a button, tap and hold the stylus on the button.
Pop-up menus With pop-up menus, you can quickly choose an action for an item. For example, you can use the pop-up menu in the contact list to quickly delete a contact, make a copy of a contact, or send an e-mail message to a contact. The actions in the pop-up menus vary from program to program. To access a pop-up menu, tap and hold the stylus on the item name that you want to perform the action on. When the menu appears, lift the stylus, and tap the action you want to perform.
Redefine Hot Keys Tap > Settings > Personal tab > Buttons. Buttons Button 1 Button 2 These hot keys can be redefined as launch keys for frequently used programs. and are exclusive phone functions so they cannot be redefined.
6 Synchronization / Windows Vista Part A PC with Windows Vista™ operating system can be used to enable connection and synchronize with your Pocket PC. The Windows Mobile® Device Center application can be used to manage your Pocket PC, and can provide Pocket PC access to other resources through the connected PC. The online services and application access can also keep the Pocket PC up-to-date with the connected PC.
1. Software installation: You could use the Getting Started CD to install Windows Mobile® Device Center on the personal computer. 2. Hardware installation: The USB cable is a plug-and-play device. Use the USB cable to connect your Pocket PC to your personal computer. USB Port 3. Using Windows Mobile® Device Center After installation is complete, the Setup Wizard helps you customize your synchronization settings.
Windows XP/2000/98 Part A PC with Windows XP/2000/98 operating system can be used to enable connection and synchronize with your Pocket PC. Using Microsoft ActiveSync, you can synchronize the information on your desktop computer with the information on your device. Synchronization compares the data on your device with your desktop computer and updates both computers with the most recent information.
Installing and Using ActiveSync Important Installation Notice Before you install ActiveSync, make sure that the USB cable on the Pocket PC is not connected to the personal computer. Connect the USB cable only after ActiveSync is installed. 1. Installing ActiveSync: You could use the Getting Started CD to install Microsoft ActiveSync version 4.5 or above on the personal computer. ActiveSync is already installed on your Pocket PC. 2. Hardware installation: The USB cable is a plug-and-play device.
3. Using ActiveSync After installation is complete, the ActiveSync Setup Wizard helps you customize your synchronization settings. Once you use the USB cable to connect the two devices properly, the Set Up a Partnership screen appears on the personal computer. Set it up according to your requirements. The green icon appears on the status bar of your personal computer to indicate that it is Connected. Click Explore on the Microsoft ActiveSync on the personal computer to access files in the Pocket PC.
FAQ About Synchronization Tap > Settings > Connections tab > USB to PC. PC 1. Factory setting defaults to checking the box. 2. If you have followed the above installation and operation procedures and find that the connection between your Pocket PC and desktop PC still cannot be established, please uncheck the box shown on the left.
USB Synchronization Before you start to synchronize, use the Pocket PC Getting Started CD to install synchronization tools on your personal computer. For more information on how to install, please refer to the Pocket PC Getting Started CD or online help. Synchronization tool is already installed on your Pocket PC. ActiveSync synchronization settings: 1. After installation is complete, the Setup Wizard will continue to guide you. Adjust the specifications according to your actual needs. 2.
Check the items you want to synchronize. Next Click Next. Finish Click Finish.
After installation is complete, the ActiveSync Setup Wizard helps you connect your Pocket PC to your desktop computer, set up a partnership so you can synchronize information between your Pocket PC and your desktop computer, and customize your synchronization settings. Your first synchronization process will automatically begin when you finish using the wizard. The green icon appears on the status bar of the personal computer to indicate that it is Connected.
Synchronization Tool on Pocket PC Once you have set up ActiveSync and completed the first synchronization process, you can initiate synchronization from your Pocket PC. To switch to ActiveSync on your Pocket PC, tap > Programs > ActiveSync. ActiveSync For more information on how to use ActiveSync on your personal computer, run ActiveSync and refer to the ActiveSync online help. To learn more about the Pocket PC ActiveSync, ActiveSync switch to ActiveSync and tap > Help.
Synchronizing using Bluetooth Without using the USB cable to connect the two devices, you can still synchronize using Bluetooth. The greatest advantage is that you don’t have to plug in and detach from the USB cable so often. This is especially useful for managing several Pocket PCs. For details on Bluetooth devices, refer to “Using Bluetooth” section.
6-12
7 Connections / Connecting to the Internet This section teaches you how to use GPRS wireless network connection. GPRS wireless networking is a convenient function for working at home or while traveling. You can use the Pocket PC to browse websites and read or send E-mails, SMS or MSN messages. To start using GPRS service, please: 1. Contact your service provider for the data plan and apply for it. 2. Install the SIM card with the GPRS plan in SIM1 slot 3. Activate Phone1.
Tap > Settings > Connections tab > Connection Wizard. Wizard 1. Select the country name from the list. 2. Select the carrier name from the list. 3. According to actual requirements, select the carrier name, and then tap Add button or Edit button. Or use the New button to add the new network connection. 4. Search button: Detect the currently available telecommunication service. If it is found, use the Add button to add the highlighted selection.
Setting the GPRS Connection To connect to the Internet or use MMS service, please make sure you have installed SIM card in SIM1 slot and activated Phone1. Phone1 Tap > Settings > Connections tab > Connections > Tasks Tasks tab. 1. As shown in the screen on the left tap “Add Add a new modem connection.” connection 2. Enter the “Make Make New Connection” Connection screen as shown in the screen on the left. Input a new connection name for convenience in making connections in the future.
3. Input the Access Point Name provided by your service provider and tap Next. Next 4. Input your personal information such as account number, and tap Finish.
Starting GPRS Connection or 1. Turn on Phone: Tap icon at the top of the screen and tap “Comm Comm. Comm. Manager.” Manager Tap and input your PIN to enable GSM. The icon will change to while the changes to . 2. Tap icon in the Communication Manager. Manager When it becomes , the GPRS (Data) connection is available. 3. Tap , then tap Settings to link to Connections. Connections You are ready to connect GPRS.
4. Connect GPRS: Select “Manage Manage existing connections” connections in Connections. Connections Tap and hold on the newly created connection name, and then select Connect to enable GPRS connection. 5. Input your account information in the Logon Network screen and tap to login to the network. 6. After the connection is established, the icon will change to . 7. Now you can use the appropriate program to access the Internet, receive or send E-mails, etc.
Disconnecting GPRS 1. Disconnect GPRS: Tap and the message window appears. Tap Disconnect. Disconnect and then 2. Turn off Phone: Tap “Comm Comm. Comm. Manager.” Manager Tap to disable GSM.
Using Bluetooth Bluetooth is a short-distance wireless communication technology with an effective range under 10 meters (30 feet). When the Bluetooth power is turned on, the indicator will blink blue. Bluetooth LED indicator (Blue) 1.Tap to launch Communication Manager. Manager to 2.Tap enable Bluetooth. Bluetooth capable devices such as the PC, Pocket PC, Bluetooth headset etc. can be connected to this product for the convenience of data sharing.
Setup the Bluetooth Connection On the Communication Manager screen, tap and hold the button, then release to enter the Bluetooth manager. Tap > Settings > Connections tab > Bluetooth Tap Bluetooth and then Devices tab. 1. Select “Add Add new device” device and the system will begin to search for nearby Bluetooth devices. 2. The search results will be similar to the screen to the left. Select the device to connect with the list. All Bluetooth devices found nearby the system.
Note Pair for Bluetooth headset: When the system asks for the password, please refer to the instructions provided with your purchased Bluetooth headset. Pair for PC or Pocket PC: When the system asks for the password, please make sure that the identical password is entered to both devices. 3. Your Pocket PC connected with these devices will be able to transfer data, receive calls on a Bluetooth headset, and other applications.
4. The screen to the left is during a call. Phone screen during a call will show a headset icon in the upper right corner, the Bluetooth headset will be used to communicate with the callee. Tap Bluetooth > Mode tab. 5. Configure the Bluetooth related options for your Pocket PC. 6. Tap > Settings > Personal Persona tab > Owner Information. Information Enter the name that you wish to show in the Name field. At the same time, other Bluetooth capable devices can recognize your Pocket PC by this name.
Tap Bluetooth and then COM Ports tab. 7. Follow the onscreen instructions to register the connected Bluetooth device as an effective COM port.
Internet Sharing Tap > Programs > Internet Sharing. Sharing This function provides a simulated modem function for the Pocket PC to connect to the PC. The built-in Bluetooth paring or USB port can be connected with the PC and provide Internet access on the PC. 1. The USB connection is used as an example. 2. Complete the connection setup between the Pocket PC and PC. The network connection and configuration can be attained from your telecom service provider. 3.
CSD Type Tap > Settings > Connections tab > CSD Type. Type You must first apply for Circuit-Switched Data (CSD) service from your telecom company before you can use this function. In short, this function is similar to the modem dial-up in a personal computer. By simulating the Pocket PC as a modem and connecting through the built-in GSM device, you can use the Pocket PC to access the web. To start using this function, please install the CSD service-enabled SIM card in SIM1 slot and activate Phone1.
Connecting with a Personal Computer For more information, refer to “Synchronization” section. Wireless LAN Transmission On the Today screen, tap to launch Communication Manager. Manager For more information, refer to “Using Wireless LAN” section.
7-16
8 Using Wireless LAN / This section teaches you how to use the Pocket PC’s built-in wireless LAN function to connect to the Internet. It is convenient for you to browse websites and send/receive E-mails through wireless networks at certain locations where wireless networking services are provided. When you purchase credits for connecting to the Internet through a wireless LAN, you will be given the following information: an IP address, DNS name server address, Proxy server, port, and network key, etc.
Connecting to Wireless LAN On the Today screen, tap Tap to launch Comm. Manager. Manager > Programs > Comm. Manager. Manager This icon will show up on your screen whenever your Pocket PC has detected a usable wireless network and has connected to that network, indicating that your Pocket PC has successfully connected to the network hotspot (Access Point). The LED indicator on the Pocket PC will blink amber.
Configure Your Wireless Network WLAN Setup Scenarios Location Home Select Networks > Settings > Connections tab > Connections > Advanced tab, Select Networks Proxy Connection 1. Close Proxy connection 2. Not required to set Proxy Network key or Access Point 1. Authentication: Select Open 2.
Configure Your Wireless Network (Normal Setup) You will need a correct IP address; DNS name server address, Proxy server, and connection port number to setup your connection. If you have purchased a wireless Internet service account, then the service desk at the location where you will be connecting will provide you with this information, or, you should obtain this information from the network administrator of your company.
4. As shown on the left, make sure that My Work Network is selected for both items, and finally tap to save and exit. My Work Network is the WLAN connection method. As this option is from a choice of two, the next time you need to use the GPRS connection, you will have to refer to the above listed steps, select My ISP for the first item. 5. At the Communication Communication Manager screen, tap and hold, and then release the button to enter the setup screen. 6.
7. Set accordingly to the rules and information provided by the hotspot location. Authentication Select Open Authentication: Encryption Select WEP to Data Encryption: enable the entry bar about Network key Network key Key index 8. Tap and hold on the name of the network connection that you can currently use, then select Connect. Connect When the icon appears on the top of the screen, your wireless network has been successfully connected.
Configure Your Wireless Network (Proxy Setup) To successfully configure your network, you will need the following information: a correct IP address, DNS name server address, Proxy server, and connection port number, etc. Please obtain the above listed information from your company’s network administrator. If your company’s networking environment doesn’t need Proxy server settings, please close the proxy connection. Tap > Settings > Connections tab > Connections > Tasks tab.
The above is applicable to an office environment that requires a Proxy setup. For others that close the proxy connection, please do not check the box named “This network connects to the Internet” and skip the following procedures. 3. Enter the name into the “Proxy Proxy server” server field. 4. Select the Advanced button and enter the advanced settings screen. 5. You can modify the settings by tapping the HTTP type. 6. Enter the number into the “Port Port” Port field. Finally, tap exit.
9 E-mails and Messages / Message Accounts Messaging is where you can manage all message types including SMS (Short Messaging Service), MMS (Multimedia Messaging Service) and E-mail accounts. To use these services, please connect your device to a network connection. Tap > Messaging. Messaging On account picker screen, select the messaging service you want to use. Tap to enter Messages Tap to enter an E-mail accounts ou have established.
Note To use MMS and E-mail, mail please: 1. Apply wireless service from your service provider 2. Activate this SIM in SIM1 slot 3. Go to > Settings > Connections tab > Connections to set up the network settings. 4. On the Today screen, tap and turn on Data Connection by tapping . SIM2 slot allows only the SMS service provided by the SIM card you install in it; if you want to send MMS message or E-mail via a certain number, please insert the SIM of that number in SIM1 slot.
Text Messages Reading Received Text Messages Tap > Messaging Messaging, On Messaging screen, tap Messages. Messages To read received messages, tap ▼, and select the sub folder Inbox under Messages.
In Inbox, Inbox you can tap and hold a message to open a list of actions; you may Delete, Delete Reply to or Forward this message. To sort the messages by sender or received time, tap Menu > Tools > Sort By and then choose the sort method.
Creating a Text Message 1. On Messaging screen, tap Messages > Menu > New > Text Message 2. In To: filed, enter the number of recipient or tap Menu > Add Recipients to select a contact. If there is more than one contact, use a semi-colon (;) to separate them. 3. In Text field, enter your message. You can tap Menu > My Text to use canned messages. 4. Tap Send. Send. 5. Select the SIM number you will use to send this message.
Note Note If the SIM card you select is not activated, a notice “Send Send failed” failed will pop up.
Multimedia Messages Reading MMS Messages Tap > Messaging > Messages. Messages In Inbox, Inbox tap on a single MMS message to view it. Use the playback controls: Play, Play Pause or Resume to view the message. To save the objects attached to this MMS message: 1. Tap Menu > View Objects, Objects 2. On object list, tap Menu > Save or Save All, All Note If you reply to an MMS message from Inbox, Inbox this reply message will be sent as an MMS message via SIM1 number.
Creating an MMS Message On Messaging screen, tap Messages > Menu > New > Multimedia Message Select an MMS template to compose a new MMS message. Or tap the envelop icon to open your own blank message. On an MMS composing screen, you may tap: Bcc / Cc / To field to add recipients. Subject field to enter the message title. Menu > Insert to insert a file. Menu > Slides to edit the slide content and settings. Menu > Preview to preview your MMS message. Send to send out this MMS message.
E-mails This section explains the basic preparations and processing principles. If you have any questions, refer to online help about Pocket PC or synchronization. Use Messaging to send and receive E-mails messages in either of these ways: 1. Send and receive e-mail messages by connecting directly to an e-mail server through an Internet service provider (ISP) or a network. 2. Synchronize e-mail messages with Microsoft Exchange or Microsoft Outlook on your desktop computer.
Synchronizing E-mail Messages If you want to synchronize e-mails with company or home usage, please refer to this section. E-mail messages can be synchronized as part of the general synchronization process. You will need to enable Inbox synchronization in synchronization tools. For information on enabling Inbox synchronization, see Help on the desktop computer. During synchronization: 1. Refer to “Connecting to the Internet” section.
Connecting Directly to the Mail Server For single-machine use, not combining office and home E-mails, please refer to “E-mail Server Setup” section. You will receive messages directly from the mail server. This is irrelevant to personal computer use. You can work online or offline. When working online, you read and respond to messages while connected to the e-mail server. Messages are sent as soon as you tap Send, Send which saves space on your Pocket PC.
E-mail Server Setup Refer to this section if you are preparing for single-machine use and not combining office and home E-mails. If you already have an E-mail account from your ISP or company network, you can use Messaging to send and receive mails and messages. To establish a new Messaging E-mail server on your Pocket PC, refer to the following sections. 1. Obtain the following information from your ISP or company’s network administrator for convenience in setting up the E-mail service.
3. Follow the instructions on the screens to setup the E-mail account. 4. Refer to “Connecting to the Internet” section or “Using Wireless LAN” section to connect the Pocket PC to the Internet and you can start sending and receiving E-mails and SMS messages. 5. Connecting to the E-mail server: To and then check the new E-mails account you setup. Tap Menu > Go To, Send/Receive Tap Menu and then Send/Receive. Note Tap Menu > Tools > Options to change the E-mail account.
Sending / Receiving E-mails Sending EE-mails Tap Menu and then New to compose a message and then tap Send to send it. To Cc or Bcc to open the Contacts screen. As long as you have set up Tap To, Contacts beforehand, you can just tap to select. Tap the data area to input the E-mail adress, mobile phone number and subject directly. If there is more than one contact, use a semi-colon (;) to separate the addressees. Use the scroll bar to view the header.
Reading Reading and reply eplying EE-mails Receive new mails by tapping Menu and then Send/Receive. Send/Receive Switch to the Inbox folder and tap to open. Changing Changing preference settings settings Set the Inbox Synchronization option in synchronization tools. Tap > Messaging > Menu > Options, Options and then the Accounts, Accounts Message tabs on the Pocket PC to set the appropriate options.
Direct Push Technology Alert The Direct Push Technology alert function will enable you as a corporate user to never miss another e-mail, using the Pocket PC for the best business service. Through the synchronization feature, your Pocket PC can instantly and automatically receive important e-mails from Microsoft Exchange Server.
2. Obtain the e-mail, server address, user name, network etc. from the company network administrator to successfully setup the server data. 3. Tap Menu and then Schedule. Schedule The Peak times and Off-peak times provide a As items arrive option, this is the direct push technology alert function.
Windows Live™ Messenger To switch to Windows Live™ Messenger, > Programs > Messenger. Messenger Windows Live™ Messenger on your Pocket PC is an instant messaging program that lets you: See who is online. Send and receive instant messages. Have instant message conversations with groups of contacts. For more information on using Windows Live™ Messenger, tap > Help. Help To use Windows Live™ Messenger, you must have a Microsoft Passport™ account or a Microsoft Exchange e-mail account.
Setting Up The first time you use: Tap > Program > Messenger. Messenger On the Today screen, tap Messenger to display the Windows Live™ Messenger sign-in screen. Before you can connect, you must enter Passport or Exchange account information. 1. Choose Messenger from > Program 2. Tap Sign in.
Working with Contacts If you already use Windows Live™ Messenger on your desktop computer, your contacts will show up on your Pocket PC without being added again. The Windows Live™ Messenger window shows all of your messenger contacts at a glance, divided into Online and Offline categories, or sorted by groups. From this view, while connected, you can chat, send an e-mail, block the contact from chatting with you, or delete contacts from your list using the pop-up menu. Tap a contact to start a chat.
Chatting with Contacts Tap a contact name to open a chat window. View full chat. Enter your message in the text entry area, and tap Send. Send Return to the contacts list, and select a contact to chat with. The contact you are chatting with. Provides the relevant menu. For example, to invite another contact to a multi-user chat, select Options and then Add participant, participant and tap the contact you want to invite.
9-22
10 Multimedia / Using Camera Pocket PC Exterior and Camera Front and Sides 1 2 3 4 5 6 7 8 9 Rear 10 11 12 Multimedia 10-1
1. MicroSD card slot 2. Camera hotkey, camera shutter, camcorder button 3. Activate or disable the flash or 4. Quit Camera spotlight 5. Digital zoom 6. Switch to other camera or camcorder modes 7. Select the storage location 8. Select front or rear camera lens 9. Select the environment lighting 10.Camera lens 11.Self portrait mirror 12.
How to Use the Camera? Notes For example, to take a self-portrait, face the light source and avoid dark surroundings or your back to the light source for better results Press the Tap button on the Pocket PC. > Programs Programs > Multimedia > Camera. Camera Action Scenery or Portrait (Default) Instructions 1. Point the screen of the Pocket PC toward you. 2. Press half the key to activate auto focus. When you hear beeps and the focus frame becomes green from red, press the same key to take a picture.
Action Scenery or Portrait (Default) Instructions 4. If you are in the camera mode from the guidance wizard, pressing the camera shutter will link you to the applications. For more information about the provided tools, please refer to the later descriptions. 5. Tap Self Portrait 1. First tap to continue with the next shot. along the bottom of the screen. When the icon changes to , the front camera lens will be used. 2.
Video Video Instructions 1. Switch to the video mode. 2. Face the Pocket PC toward you. 3. If the screenshot is good, press the camcorder key on the side of the Pocket PC to begin filming. 4. During filming, you will see a red dot and flashing numbers of time lapsed at the upper left of the screen.
Video Video Instructions 5. Press the camcorder key again to stop filming. If you are in the video mode from the guidance wizard, stopping filming will link you to the applications. For more information about the provided tools, please refer to the later descriptions. 6. Tap to continue with the next video segment. Icon Toolbar Description Continue to shoot or film Delete the current camera or camcorder Link to MMS Message or Messaging Link to Album When using camera mode, play or pause the video.
Common Tools for Camera The Camera can be used to take pictures or videos. This chapter will introduce the common tools for camera and icons on the screen. The previous chapter introduces hardware hotkeys on the Pocket PC that can also control some of the tool icons shown on the screen. 1 8 2 3 4 5 6 9 7 10 11 12 13 14 15 16 1. Switch to other camera or camcorder modes 2. Remaining shots 3. Timer for “self-timer” 4. Display or hide the date 5. Activate or disable the flash 6.
Camera Modes Tap or in button to switch to other camera modes. Camera Mode Description Normal camera mode. Camera mode with picture frame. Tap to select picture frame or background. Camera mode with GPS information. becomes to white icon after the GPS position is fixed.
Camera Mode Description “Continuous Continuous Shot” Shot camera mode. Tap to select the number of shots.
Common Tools for Camcorder The Camera can be used to take pictures or videos. This chapter will introduce the common tools for camcorder and icons on the screen. The previous chapter introduces hardware hotkeys on the Pocket PC that can also control some of the tool icons shown on the screen. 1 2 6 3 4 5 7 8 9 10 11 12 13 14 1. Switch to other camera or camcorder modes 2. Record status: When the recording begins, you will see a red dot. 3. Activate or disable the audio 4.
Camcorder Modes Tap or in button to switch to other camcorder modes. Camcorder Mode Description Normal camcorder mode. MMS camcorder mode.
Advanced Setup for Camera or Camcorder Tap the onscreen to open the advanced setup screen for the Camera. Camera Tap to show the corresponding options for the function. Options. Flick to scroll l up or down to see the options if the number of items exceeds a screen displaying. Tap or to switch to the previous page or next page. Tap to select camera or camcorder setup screen. to save the settings.
Camera Camcorder Descriptions Select the resolution, higher resolutions lead to larger files. Select the environment lighting (white balance). Adjust for fluorescent light frequency. -- Activate “self selfself-timer;” timer a specific length of time can be set for “self selfself-timer.” timer Activate or disable the flash or spotlight. Activate or disable the audio. -- -- Display or hide the date. Select effects. -- Select quality. -- -- Select file format.
Important Hints 1. When the “--” is shown, this indicates that the function is not supported under this mode. 2. When the camera lens is set to face the front, for example when you want to have a self portrait, the picture frame function will not be available. 3. Functions and options for various camera modes will be referred to the actual onscreen display, and will not be listed here in full.
Album Tap > Programs > Multimedia > Album. Album You can use Album to manage and view multimedia information such as pictures, music, and videos. Preview Album Information Display the folder name you are browsing. Select the sort order for the list. Preview thumbnails, which are arranged in the sort order you set. Tap a thumbnail to see a picture at full screen. Tap a thumbnail to play music or video file. Link to Camera. Camera Tap to move to the upper directory.
Tap a thumbnail to see the picture at full screen. Flick to scroll left or right to browse the previous or next picture. If you enable the “Gravity Sensor Screen Orientation,” you can turn your Pocket PC sideways to view the picture in landscape orientation. Tap on or tap on the screen to display the pop-up menu. Tap on the screen to display the pop-up menu. Start the slide show. Tap anywhere on the screen to stop the slide show. Message.
Tap to zoom in a picture. In the zoom-in mode, the smaller frame shown left is part of the picture what you see on the screen. Flick to scroll left, right, up or down to view the part of picture exceeding the screen. Tap outside the pop-up menu to abort it. Browse the previous or next picture. Tap to zoom in or out. Slideshow Settings Tap Album > Menu > Slideshow Settings.
Namecard Manager > Programs > Multimedia > Namecard Manager. Manager Provides full name cards management for scanning paper name cards into a digital format. The contacts database from Pocket PC can also be integrated into a unified contacts book. Digitize New Name Cards 1. Tap Recognize. Recognize 2. Tip: Before taking a picture, please take the following pointers to improve recognition quality.
3. Take pictures Prepare a name card and adjust the position. Press the shutter to the side of the Pocket PC to take the shot. You can directly select on the screen to take a picture. 4. Name card recognition Select Language to choose the appropriate language for this name card. Select or Identify to recognize the contents on the name card.
5. Modify the name card’s contents and confirm Select the contents field to make modifications. When selecting the contents field, the name card source will be shown for verification. Double tap on the name card area to zoom to the max viewing. Select the field name to modify and adjust the error recognitions. Choose whether to keep this data entry. Add this name card to the contacts database on the Pocket PC. Go back to Contacts to view the new entry.
Name Cards Management 1. Tap Manage. Manage 2. Main screen for name card management Only recognized name cards will be shown here. Enter the quick search page. Tap a letter and the results for name cards created in Namecard Manager will be shown. Delete the entered text to the left. Search criteria for name card. All matching name cards for “Name, Work, or Tel” will be shown on the screen. To search for all name cards, please leave the field blank.
Name card index display area, select an entry to expand its contents. Display area for the original name card. Provides the relevant menu. New: New Create a new digital name card. Import: Import Supported format includes BMP, JPG, and PNG. An existing name card image file can be imported and then processed. Edit: Edit Modify the name card information. Delete: Delete Delete the selected name card. Return to the previous page. 3.
11 Companion Programs / Microsoft Pocket Outlook includes Calendar, Calendar Contacts, Contacts Tasks, Tasks Messaging, Messaging and Notes. Notes You can use these programs individually or together. For example, e-mail addresses stored in Contacts can be used to address e-mail messages in Messaging. Messaging Using synchronization tools, you can synchronize information in Microsoft Outlook or Microsoft Exchange on your desktop computer with your Pocket PC.
Calendar: Scheduling Appointments and Meetings Use Calendar to schedule appointments, including meetings and other events. You can check your appointments in one of several views (Agenda, Day, Week, Month, and Year) and easily switch views by using the View menu. Tap to go to today. Tap to display or edit the appointment details. View menu. Tap Menu and then New Appointment to create a new appointment.
Create an Appointment Tap to return to the calendar (the appointment is saved automatically). Tap to choose from predefined text. Tap to choose from previously entered locations. Tap to select a time. Tap to select a date. Notes is a good place for maps and directions. 1. If you are in Day or Week view, tap the desired date and time for the appointment. 2. Tap Menu and then New Appointment. Appointment 3. Using the input panel, enter a description and a location.
Notes If you select Remind me in an appointment, your Pocket PC will remind you according to the options set in > Settings > Personal tab >Sounds Sounds & Notifications. Notifications Use the Summary Screen When you tap an appointment in Calendar, Calendar a summary screen is displayed. To change the appointment, tap Edit. Edit View appointment details. View. Tap Menu and then Edit to change appointment.
Schedule a Meeting 1. Create an appointment. 2. In the appointment details, hide the input panel, and then tap Attendees. Attendees 3. From the list of e-mail addresses you’ve entered in Contacts, Contacts select the meeting attendees. The meeting notice is created automatically and placed in the Outbox folder. For more information on sending and receiving meeting requests, see Calendar Help and Messaging Help on the Pocket PC.
Contacts Contacts maintains a list of your friends and colleagues, in which you can easily manage or find their information on this device. To enter Contacts screen, tap > Contacts. Contacts Contact entry stored on SIM1 card. Contact entry stored on SIM2 card. Contact entry stored as Outlook Contact on your device. Tap to create a new contact. Tap and enter part of a name to quickly find it in the list.
To show all contacts again, select All Contacts. Contacts To view a contact not assigned to a category, select No Categories. Categories To look for SIM2 contacts, check SIM2 Contacts to sort out the contacts stored on SIM2. SIM2 3. To view the names of companies your contacts work for, in the contact list, tap Menu > View By > Company. Company The number of contacts that work for that company will be displayed to the right of the company name. 4.
Creating a Contact 1. On Contacts screen, tap New, New and then select a contact type. To create a contact on your device, select Outlook Contact, Contact hereafter you can manage this contact even if the SIM card is absent. To create a contact on either SIM1 or SIM2 card, select SIM Contact or SIM2 Contact. Contact To manage your contact entries, you can also go to > Programs > Phone > SIM Manager. Manager. 2. Use the input panel to enter a name and other contact information.
Using the Summary Screen When you tap a contact in the contact list, a summary screen is displayed. View contact details. All of the available contact information is listed, you can tap and use easily. Provides the relevant menu. For example, select Edit to change the contact information. Or select Save to SIM SIM or Save to Contacts to duplicate to Contacts or SIM phonebook. Tap to view notes.
Tasks: Keeping a To Do List Use Tasks to keep track of what you have to do. Indicates high priority. Tap to display or edit the task details. Tap and hold to display a pop-up menu of actions. Tap to change the status. Provides the relevant menu. For example, tap Filter to select the category of tasks you want displayed in the list. Tap Sort By to select the sort order of the list. Or tap Options Options to change the way information is displayed in the list.
Create a Task 1. Tap Menu and then New Task. Task 2. Using the input panel, enter a description. 3. You can enter a start date and due date or enter other information by first tapping the field. If the input panel is open, you will need to hide it to see all available fields. 4. To assign the task to a category, tap Categories and select a category from the list. In the task list, you can display tasks by category. 5. To add notes, tap the Notes Notes tab. You can enter text, draw, or create a recording.
Use the Summary Screen When you tap a task in the task list, a summary screen is displayed. To change the task, tap Edit. Edit View task details. Tap to show and hide additional summary information. View notes. Tap to change task.
Notes: Capturing Thoughts and Ideas Quickly capture thoughts, reminders, ideas, drawings, and phone numbers with Notes. Notes You can create a written note or a recording. You can also include a recording in a note. If a note is open when you create the recording, it will be included in the note as an icon. If the note list is displayed, it will be created as a stand-alone recording. Tap to change the sort order of the list. Tap to open a note or play a recording.
Create a Note 1. Tap New. New 2. Create your note by writing, drawing, typing, and recording. For more information about using the input panel, writing and drawing on the screen, and creating recordings, see “Enter Information on Your Pocket PC.” Tap to return to the note list (the note is saved automatically). Tap to show or hide the input panel. Provides the relevant menu. For example, check View Recording Toolbar to add a 11-14 recording to the note; or check Draw to write on the screen.
Word Mobile Word Mobile works with Microsoft Word on your desktop computer to give you easy access to copies of your documents. You can create new documents on your Pocket PC, or you can copy documents from your desktop computer to your Pocket PC. Synchronize documents between your desktop computer and your Pocket PC so that you have the most up-to-date content in both locations. Use Word Mobile to create documents, such as letters, meeting minutes, and trip reports.
Select the type of folder you want displayed in the list. Tap to change the sort order of the list. Tap to open a document. Tap and hold an item to see a pop-up menu of actions. Tap to create a new document. Notes You can change the zoom magnification by tapping View and then Zoom. Zoom Then select the percentage you want. Select a higher percentage to enter text and a lower one to see more of your document.
Using the input panel, enter typed text into the document. For more information on entering typed text, see “Enter Information on Your Pocket PC.” To format existing text and to edit text, first select the text. You can select text as you do in a Word document, using your stylus instead of the mouse to drag through the text you want to select. You can search a document to find text by tapping Menu, Menu Edit and then Find/Replace.
Excel Mobile Excel Mobile works with Microsoft Excel on your desktop computer to give you easy access to copies of your workbooks. You can create new workbooks on your Pocket PC, or you can copy workbooks from your desktop computer to your Pocket PC. Synchronize workbooks between your desktop computer and your Pocket PC so that you have the most up-to-date content in both locations. Use Excel Mobile to create workbooks, such as expense reports and mileage logs.
Excel Mobile provides fundamental spreadsheet tools, such as formulas, functions, sorting, and filtering. To display the toolbar, tap View and then check Toolbar. Toolbar Cell contents appear here as you enter them. Select cell contents for the resource of chart. Insert Chart button AutoSum button Zoom button Tap Format Chart button to modify the relevant information, such as titles, scale, type and series.
Tips for Working in Excel Mobile For more information on using Excel Mobile, tap > Help. Help Note the following when working in large worksheets in Excel Mobile: View in full-screen mode to see as much of your worksheet as possible. Tap View and then check Full Screen. Screen To exit full-screen mode, tap View and then Full Screen to restore. Show and hide window elements. Tap View, View Show and then tap the elements you want to show or hide. Freeze panes on a worksheet.
PowerPoint Mobile View PowerPoint slides created in PowerPoint 97 and above versions on your desktop computer. The supported formats include .ppt and .pps files. Select the type of folder you want displayed in the list. Tap to change the sort order of the list. Tap to open a file, and play the slides. Tap to open the file you played last time. Provides the relevant menu. Tap on the lower left corner to open the menu. Tap End Show to quit.
Windows Media Player Use Microsoft Windows Media Player for Pocket PC to play digital audio and video files that are stored on your Pocket PC or on a network. To switch to Windows Media Player for Pocket PC, tap > Programs > Windows Media. Media Use full-screen to view video. Display website. Find music or video to be played from website. Return to the start of the current file or previous file. Tap to play or pause. Tap to skip to the next song. Tap to adjust volume.
Use Microsoft Windows Media Player on your desktop computer to copy digital audio and video files to your Pocket PC. For more information about using Windows Media Player for Pocket PC, tap > Help.
Streaming Player Tap > Programs > Streaming Player. Player Some audio and movie files that cannot be played back from Microsoft Windows Media Player, for example RTSP, HTTP… types of files, will be automatically switched to Streaming Player by the system. Automatically launch the Streaming Player for playback when using Internet Explorer to run media files not supported by Windows Media. Media Tap in to enter the website address and media file name. View the video.
Internet Explorer Using Internet Explorer Use Microsoft Internet Explorer Mobile to view Web or WAP pages in either of these ways: During synchronization with your desktop computer, download your favorite links and mobile favorites that are stored in the Mobile Favorites subfolder in Internet Explorer on the desktop computer. Connect to an Internet service provider (ISP) or network and browse the Web. To do this, you’ll need to create the connection first, as described in “Connect to the Internet”.
Browse the Internet Refer to “Connecting to the Internet” section to connect the Pocket PC to the Internet and start browsing websites. 1. Tap > Internet Explorer. Explorer 2. Input the site address into the address bar at the top of the screen and connect to this site. 3. Use the scroll bar at the right side or bottom of the screen, or press the up or down button on the Pocket PC to view the contents of the entire website.
View Mobile Favorites and Channels Tap the favorite you want to view. Tap to add or delete a folder or favorite link. 1. Tap the Favorites button to display your list of favorites. 2. Tap the page you want to view. You’ll see the page that was downloaded the last time you synchronized with your desktop computer. If the page is not on your Pocket PC, the favorite will be dimmed.
Favorite Links During synchronization, the list of favorite links in the Mobile Favorites folder on your desktop computer is synchronized with Pocket Internet Explorer on your Pocket PC. Both computers are updated with changes made to either list each time you synchronize. Unless you mark the favorite link as a mobile favorite, only the link will be downloaded to your Pocket PC, and you will need to connect to your ISP or network to view the content.
5. Synchronize your Pocket PC and desktop computer. Mobile favorites that are stored in the Mobile Favorites folder in Internet Explorer are downloaded to your Pocket PC. Notes If you did not specify an update schedule in step 3, you will need to manually download content to keep the information updated on your desktop computer and Pocket PC. Before synchronizing with your Pocket PC, in Internet Explorer on your desktop computer, click Tools and then Synchronize.
12 Maintaining the Pocket PC / Backup Utility Tap > Programs > Utilities > Backup Utility. Utility Backup Utility is used to back up or restore files saved in the Pocket PC. You can back up personal data such as Calendar, Calendar Contacts, Contacts Tasks, Tasks Personal profile, profile Network settings, settings Messaging (E-mails and SMS), etc. Storage Space When making backups, you can choose the following storage spaces: 1. My Documents: Data saved here may disappear when you perform a cold boot.
Backup Files Wizard Mode Backup Tap Backup. Tap Next button and the Wizard will guide through the steps that follow. Standard: Standard Switch to the Standard mode. Standard Mode Backup your personal data to a storage space. Tap the Backup tab. Tap to check the items for backup. Tap to select the storage space from the list. Tap Backup button to start the backup. 12-2 Advanced button: Enter the Advanced settings screen.
Advanced Settings Options Under the Backup Files screen, tap Advanced button to enter the Advanced settings screen as shown below. Check the options as required. If you check this option, the Wizard will guide you through the steps to complete the operation the next time you open Backup Utility. Utility Cancel button OK button Auto backup If you checked “Auto files,” files tap to enter the screen shown on the left. Select the backup option. Select the site to backup to.
Auto backup on If you checked “Auto schedule,” schedule tap to enter the screen shown on the left. Backup frequency. Tap the date button on the right of “Starting Starting” Starting to set the starting date. Tap the time button on the right of “Starting Starting” Starting to set the starting time. Weekly,” Weekly If you have selected “Weekly tap the function button on the right of “Every Every” Every to set the day of the week to backup.
Restore Files Caution! 1. When restoring files, the system will delete all current data in the Pocket PC and replace it with the backup files. 2. To make sure that files can be restored successfully, do not use the Pocket PC while performing restore. 3. Restore cannot be stopped once it is started. Think carefully before proceeding. 4. After restore completed, your Pocket PC will reboot. Wizard Mode Restore Tap Restore. Next button and the Tap Wizard will guide through the steps that follow.
Standard Mode Restore the backup personal data from a storage space. Tap the Restore tab. Latest” Restore Latest below “Restore Select “Latest From.” From Or select from the list. Tap backup file name from the list under “File File Name.” Name Tap restoring.
Adding or Removing Programs Programs added to your Pocket PC at the factory are stored in ROM (read-only memory). You cannot remove this software, and you’ll never accidentally lose ROM contents. All other programs and data files added to your Pocket PC after factory installation are stored in RAM (random access memory). You can install any program created for your Pocket PC, as long as your Pocket PC has enough memory.
5. Double-click the *.exe file. If the file is an installer, the installation wizard will begin. Follow the directions on the screen. Once the software has been installed on your desktop computer, the installer will automatically transfer the software to your Pocket PC. If the file is not an installer, you will see an error message stating that the program is valid but it is designed for a different type of computer. You will need to move this file to your Pocket PC.
Add a Program to the Start Menu Tap > Settings > Personal Personal tab > Menus. Menus Check the box for the program. If you do not see the program listed, you can either use File Explorer on the Pocket PC to move the program to the Start Menu folder, or use synchronization tools on the desktop computer to create a shortcut to the program and place the shortcut in the Start Menu folder.
Using synchronization tools on the desktop computer: Use the Explorer in synchronization tools to explore your Pocket PC files and locate the program. Right-click the program and then click Create Shortcut. Shortcut Move the shortcut to the Start Menu folder in the Windows folder. The shortcut now appears on the menu. For more information, see Help. Remove Programs Tap > Settings. Settings On the System tab, tap Remove Programs.
Manage Memory View Memory Status Tap > Settings > System tab > Memory. Memory Tap the Main tab. The status of Storage and Program memory. Find: Quick link to the Search program. Tap the Storage Card tab. Current storage card memory status. Tap to select the built-in or external storage card.
Find Available Memory Under certain circumstances such as insufficient memory, the Pocket PC cannot allocate memory automatically. Try to solve this problem through the following methods: Tap > Programs > Search. Search 1. To find files occupying larger amounts of memory, select “Larger Larger than 64 KB” KB for type and tap Search. Search 2. Then use File Explorer. 1. Tap > Programs > File Explorer. Explorer Use File Explorer to move the files you want to keep to external storage cards.
Tap > Messaging > Menu > Tools > Options > Storage tab. Store attachments on Check “Store storage card” card to save attached files from E-mails automatically in the storage card in future. Tap > Internet Explorer > Menu > Tools > Options > Memory tab Tap Clear History and Delete Files to delete records of websites that you have browsed.
Tap > Programs > Notes/Word Notes Word Mobile/Excel Mobile Excel Mobile > Menu > Options. Options 1. Enter the Notes file list screen. 2. Tap Menu and then Options. Options 3. Tap the “Save Save to” to function button and select SDMMC from the list. This indicates that you are using your external storage card. Hereafter, new files will be automatically saved to this storage card. Follw the same operation procedure for Notes in Word Mobile and Excel Mobile.
System Information Tap > Settings > System tab > System Information. Information Tap or ― to display or hide the system information. To find detailed information of your SIM cards, tap infront of “Wireless Wireless module” module to expand the category, and tap the SIM card you desire to look at. If you have installed two SIM cards in the slots, both IMEI numbers of the SIM cards will be shown here.
12-16
13 Voice Commander / Tap > Programs > Voice Commander. Commander Voice Commander is continuous voice recognition application software in the Pocket PC. Voice Commander allows the user to use their own voice to dial and control functions. Voice Commander has the following features: Fully voice-controlled system that allows the user to complete operations (such as dialing phone or running applications) quickly without using hands.
Starting Voice Commander Here are two methods for running Voice Commander: Commander 1. Tap > Programs > Voice Commander > Voice Commander. Commander 2. Voice Commander key. The system sets the button on the Pocket PC as the exclusive “Voice Commander” button. Just press this key to run Voice. Voice Show the format of voice command. Re-Start button: Restart Voice ReCommander. Commander Menu button: Settings: Settings Setup Voice Commander. Help: Help About Voice Commander.
Voice Command Format Press the Voice Commander button on the Pocket PC and enter the Voice Commander screen.
Tips Tips All the names in Contacts will automatically become recognizable contacts in the “Voice dialing” syntax. However, if the number of contacts exceeds 1000 entries, the system will not recognize the excessive entries. To add these entries to Voice Commander for recognition, tap Menu > Settings or run Voice Commander Settings to check and add these contacts manually for voice recognition.
Voice Commander Settings There are two ways to run Voice Commander Settings: Settings Tap > Programs > Voice Commander > Voice Commander Settings Settings. tings Tap Menu > Settings while using Voice Commander. Commander Voice Commander Settings allows the user to personalize the Voice Commander settings, add and remove contacts or applications within the recognition range, record voice tags or play commands to prompt the user on how to say the correct command.
Play button: Play the recorded voice tag for this contact and hear how it is pronounced. Build button: Record the voice tag for this contact again. During the recording, tap Cancel button to cancel recording. Delete button: Delete the voice tag for this contact. Contacts Contacts tab: Sets the voice commands for Contacts. Application tab: Sets the voice commands for applications. Digit Training tab: Sets the voice command for digital dialing.
Tips You can choose which Contacts are to be added to the recognizable range of the Voice Commander. By default, the system automatically adds all names within the recognizable range. If the number of Contacts exceeds 1000 entries, the system will not recognize the excessive entries. To add these contacts to Voice Commander for recognition, manually check the check boxes in front of the contact entries.
Application Settings Page Tap Voice Commander Settings > Application tab and the Settings page will list the applications and settings installed by the Pocket PC on and then Programs (whether or not it is selected, with or without voice tag). You can choose which applications are to be added to the recognizable range of the Voice Commander. Commander By default, the system automatically adds all applications as recognizable targets in the < Application > syntax in “Voice open application.
Play button: Play the recorded voice tag for this application and hear how it is pronounced. During the recording, tap Build button: Record the voice tag for this application again. Cancel button : Tap to cancel recording. Delete button: If there is a Lips icon, the voice tag for this application can be deleted and restored to the default system voice. Application example: You want to record Windows Live™ Messengers as “Chat room.” 1. Tap Windows Live™ Messengers. 2. Tap Build button. 3.
Music Settings Page Tap Voice Commander Settings and then the Music tab, the settings page will list the music files and configuration status of the specify folder in your Pocket PC or on your storage card. If you add a new music file, the system will update in real-time, automatically adding the file to your recognizable range, saving you the time of searching for your music files. The system will automatically activate music files stored in the following folders: 1. All folders on your storage card. 2.
Check box function If the music file name is checked, it can be identified normally. If unchecked, this indicates that it is not within the recognizable range. If the check box is gray and cannot be checked, this indicates that the item is unrecognizable. Build a voice tag to add a gray item into the recognizable range. Lips icon: Voice tag is built. Tapped music file name is highlighted and can be used with functions.
Digit Training Page Tap Voice Commander Settings and then the Digit Training tab. This function trains a set of personal voice model to increase accuracy in recognition for users with heavier accents. : Voice tag is built. : Current digit to be recorded. Use adapted model” model to Check “Use use the model tailor made for you with better recognition ability. Record button: Start recording the assigned digit. Remove All button: Delete all voice tags.
Tips As long as you have completed recording, then you can check “Use Use adapted model” model to use the personal model tailored made for you. It is recommended that you recite all 10 sets of numbers so the adaptation effect is more obvious. If you do not want to use the adapted model, then just uncheck “Use Use adapted model.” mode If you have trained 10 sets of number as 1 set of voice model, the system will show that all numbers are already recorded when you run this function.
Digit Settings Page The digit setting is for voice recognition. The “Length Length of phone number” number setting specifies the maximum number of digits that can be entered as the phone number. These settings will improve recognition accuracy. There are three fields in this screen, you can set different lengths in the three fields respectively. The system default settings are 3, 7, and 10, this means that in Digital Dial your system will recognize telephone numbers of 3, 7, and 10 digits in length.
Advanced Settings Page Sensitivity: ity When you use this Sensitivity setting, the voice recognition system is not as strict while performing voice recognition tasks, in other words, under this setting the system will respond to your voice most of the time and you won’t have many non-responsive situations. You should set the system to Sensitive when in continually noisy environments, for example when on a train or in a factory, etc.
FAQ Question: I want to make a call to my friend Andy Miller, but I’m tired of reading manuals. What do I need to know if I just want to make phone calls? Answer: Make sure you have Andy Miller’s name and phone number in the contact database. Press the Voice Commander button, and say “Call Andy Miller.” The system will guide you through it. Question: I added a new contact but it is not recognized. Answer: 1. The system only recognizes English words and characters or digits.
Question: I performed digit training today, but I found that the accuracy is worse than before, what do I do now? Answer: You can retry the digit training again in a “quiet” place. And if it still doesn’t help, disable the adapted model and use the default one. To disable the adapted model, tap Voice Commander Settings, Settings the Digit Training Training tab, and then uncheck “Use adapted model.” Or just tap Remove All button to remove the model. It will save you some memory this way.
13-18
14 Specifications / Item Description ® Operating system Windows Mobile 6.1 Professional Processor Samsung SC3 6400, 533MHz Memory 256MB ROM, 128 MB RAM Display 2.8" VGA, 65,536 colors TFT-LCD touch window(640 x 480) Communication 3.5G HSDPA / UMTS (2100/1900/850 MHz) Quad-Band GSM：850/900/1800/1900 MHz EDGE class 10/GPRS class 10 2.75G GSM/GPRS Tri-Band(900/1800/1900) Wireless LAN 802.11b/g Bluetooth 2.0 class 2 + EDR GPS Embedded Chip, SiRF Star III Camera 3.
Design and specifications are subject to change without notice. Item Interface/Audio Description Built-in microphone and speaker External stereo headset jack Interface/Data USB Sync Power supply Battery: 1530 mAh Li-Ion Polymer, rechargeable, replaceable AC Adapter: 100~240 VAC/50~60 Hz, 5V/1A DC Environmental Daily operation: 0°c ~ 40°c; storage: -10°c ~ 50°c temperature Environmental 45% ~ 85% humidity Dimensions 106 x 60.
15 Regulation Notice and Safety Declaration / SAR Information Your device contains a radio transmitter and receiver, and it is designed, manufactured and tested not to exceed the radio frequency exposure limitations recommended by international guidelines. The maximum SAR values for DX900 are: 0.831 W/kg @10g (GSM 900) 0.373 W/kg @10g (GSM1800) 0.492 W/kg @10g (WCDMA 2100) 0.
Health and Safety Information Electrical and Battery Safety Please use ONLY accessories approved by the manufacturer. Any battery, AC adapter or cable of which authenticity is not verified by authorized service point or dealer (even if similar to original product in appearance or specifications) should not be used with your Pocket PC. The warranty of your Pocket PC DOES NOT apply to damage caused by use with non-manufacturer approved products.
Do not use ordinary pen or any object with a sharp tip to tap the Pocket PC cover or screen (LCD panel) to avoid damaging and scratching the surfaces. Do not use corrosive or volatile liquids to wipe the Pocket PC. If necessary, use a soft cloth or tissue to wipe the Pocket PC. Warranty Security In case the Pocket PC is damaged, kindly return it to your place of purchase. Do not attempt to disassemble this device on your own as this may void the warranty.
Safety in airports, medical facilities, and inflammable environments environments When aboard an aircraft, at a medical facility, or at the gas pump where wireless communication devices are prohibited, please launch the Communication Manager and then tap the icon turns orange button. When the color of the , the Flight Mode is activated and the wireless connection of the Pocket PC is disabled.
Explosive Atmospheres Atmospheres When in any area with a potentially explosive atmosphere or where flammable materials exist, the product should be turned off and user should obey all signs and instructions. Sparks in such areas could cause an explosion or resulting in bally injury or even death. Users are advised not to use the equipment at refueling points such as service or gas stations.
Regulatory Notices Agency identification numbers For regulatory identification purposes, your product is assigned a model number of DX900. To ensure continued reliable and safe operation of your Pocket PC, use only the accessories listed in this document. This product is intended to be charged only from an approved battery charger (rated 5V DC, 1A).
ETSI EN 300 328 V1.7.1 – Electromagnetic compatibility and Radio spectrum Matters (ERM); Wide-band transmission systems; Data transmission equipment operating in the 2.4 GHz band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE directive. ETSI EN 301 489-1 V1.6.
EN 50360 – 2001 – Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz ~ 3 GHz).
WEEE Notices The Directive on Waste Electrical and Electronic Equipment (WEEE), which entered into force as European law on 13th February 2003, resulted in a major change in the treatment of electrical equipment at end-of-life. The purpose of this Directive is, as a first priority, the prevention of WEEE, and in addition, to promote the reuse, recycling and other forms of recovery of such wastes of as to reduce disposal.
15-10
16 FAQ / 1. What features does the Pocket PC have? Answer: Capability of carrying dual SIM cards. Built-in 802.11b/g wireless networking module. The latest Windows Mobile® 6.1 Professional operating system, with all its settings stored on a Flash ROM. You won’t have to worry about losing your data even if the Pocket PC runs completely out of power. The extra-large Flash memory space is capable of storing a large amount of personal data and application programs. 2.
3. My Pocket PC cannot boot. What should I do about it? Answer: Make sure the Pocket PC battery you use still has enough power. Plug your Pocket PC into the charger, and make sure the red charging indicator lights up. Press the POWER button. button 4. My Pocket PC has a screen freeze or the system does not respond. What should I do about it? Answer: You may reset your Pocket PC. It means to re-start the whole system to release unnecessary resources so that the system can return to normal.
5. Why doesn’t my Pocket PC make any sound? Answer: Tap the speaker icon on the top right of the screen, then select the volume control options, or adjust the volume of the incoming call sound. Alternatively, you may use the volume control key to control the volume. 6. Why does my Pocket PC screen automatically become dark? Answer: Tap > Settings > System System tab > Backlight > Battery power or the External power tab.
8. The characters on the screen are too small to read. How can I enlarge them? Answer: Tap > Settings > System tab > Screen > Text size tab. You may adjust the text size as you wish. Also, you may select the landscape orientation in the General tab screen. Try and change them so that you can read more smoothly. 9. The contact point of my stylus is not quite precise.
11. My Pocket PC's Activesync cannot be executed or make a connection. What should I do about it? Answer: Make sure you have installed Activesync version 4.5 or above. The companion CD contains the software. If you have lost the CD, you may download it from the Microsoft Website. Make sure the charger as well as the USB cable provided along with the product are already connected up to your PC end.
16-6
17 Index / 3 3.
Create a Task · 11-11 Find Information · 5-11 Create an Appointment · 11-3 Finding a contact · 11-6 Creating a contact · 11-8 Flashlight LED · 1-3 Creating a text message · 9-5 Flight mode · 2-22 Creating an MMS Message · 9-8 Fully charge the battery · 1-11 CSD Type · 2-11, 7-14 D G Getting Started CD · 1-1, 6-2, 6-4 Default Settings · 1-16, 1-18 GPRS Connection · 7-3 Dimensions · 14-2 GPS · 3-2, 14-1 Direct Push Technology · 9-16 GPS Viewer · 2-7, 3-9 Disconnect GPRS · 7-7 Display · 1-2,
Location SMS · 2-7, 3-7 Lock · 2-9 Owner Information · 2-9 P M Phone · 2-9, 4-1 Making a call · 4-6 Phone Receiver · 1-2, 4-2 Memory · 2-10, 12-11, 14-1 Phone Speaker · 1-2, 4-2 Menus · 2-9, 12-9 Phone1 · 2-21, 2-22 Messaging · 2-7, 9-1 Phone2 · 2-21, 2-22 Messenger · 2-8, 9-18 Pictures & Videos · 2-8 Microphone · 2-10, 4-2, 5-7 Pocket PC · 1-1 MicroSD slot · 1-3 Pop-up menus · 5-13 Microsoft ActiveSync · 6-3 Power · 1-14, 2-10, 5-3 Microsoft Internet Explorer Mobile · Power Bu
Satellite Navigation · 3-1 Stylus holder · 1-3 Scenarios · 5-10 Synchronizing E-mail · 9-10 Screen · 2-1, 2-10 System Information · 2-10, 12-15 Search · 2-8, 5-11, 12-12 Select a Drawing · 2-31 Select Writing · 2-29 Send button · 1-2 Send Button · 4-3 SIM card · 1-6 SIM Manager · 4-17 SIM Tool Kit · 4-19 SIM1 · 2-21 SIM2 · 2-21 Sleep mode · 1-14 SMS · 9-3 T Tap · 1-14 Tap and hold · 1-14 Tasks · 2-7, 11-10 Text Message · 9-3 Today · 2-9 Today screen · 2-3 Touch screen · 1-2 Touch the screen · 1-14 Tr
Voice Commander Button · 2-33 Windows Media · 2-8, 11-22 Voice Commander hot key · 13-2 Windows Media Player · 11-22 Voice Commander Settings · 2-7, 13-5 Windows Mobile® Device Center · 6-1 Volume control key · 1-2 Wireless LAN · 7-15, 8-1 W Windows Live · 2-8 Word Mobile · 11-15 Write on the Screen · 2-28 Windows Live™ Messenger · 9-18 Index 17-5
First Version: Current Version: Number: January 2009 January 2009, Version 1 20081218
