GPS Pocket PC Phone User Manual
Safety Instructions U Please Read Before Proceeding. U Avoid heavily pressing on the touch screen. U Avoid heavily pressing on the touch screen with the stylus or your fingers. U This product is not charged when shipped from the factory. When you use this product the first time, we recommend that you install the battery as illustrated and fully charge it for about 8 hours before use. U Do not remove the battery while charging. U Before installing the SIM card, launch Wireless Manager, then tap the button.
Where to Find Information For information on: See this source: Programs on your Pocket PC This User’s Guide and Pocket PC Help. To view Help, tap and then Help. Additional programs that can The Pocket PC Getting Started CD. be installed on the Pocket PC Connecting to and Check the user’s guide that comes with this synchronizing with a desktop product or look for the online help relevant computer to synchronization tools on the desktop PC or the Pocket PC. Up-to-date information on http://www.
Trademarks Trademarks and names of products contained in this manual are the properties respective registered companies. Java and other Java related trademarks are the registered trademarks of Sun Microsystems, Inc. Digital Rights Management This product supports Digital Rights Management (DRM) technologies.
User Manual SAFETY INSTRUCTIONS ........................................................................ 2 WHERE TO FIND INFORMATION ............................................................ 3 TRADEMARKS ...................................................................................... 4 DIGITAL RIGHTS MANAGEMENT .......................................................... 4 1 Getting Started / ...................................................................... 1-1 PACKAGE CONTENT ................
2 Using the Pocket PC /.............................................................. 2-1 START ............................................................................................... 2-1 Screen........................................................................................... 2-1 Today Screen ................................................................................ 2-3 Programs......................................................................................
3 Voice Command Satellite Navigation / .................................. 3-1 NAVIGATION DEVICE INSTALLATION ................................................. 3-1 GPS NAVIGATION SOFTWARE INSTALLATION .................................... 3-2 CONDITIONS FOR USING GPS CAR NAVIGATION ............................... 3-2 SATELLITE DATA UPDATE (NOT SUPPORTED IN USA) ....................... 3-4 LOCATION SMS ................................................................................ 3-7 GPS VIEWER ............
Speed Dial.................................................................................. 4-21 Hot Key Switch...................................................................... 4-21 Frequently Dialed Screen....................................................... 4-22 Index Dial............................................................................... 4-23 Call Filter *................................................................................ 4-24 5 Customize Your Pocket PC /...............
7 Connections / ........................................................................... 7-1 CONNECTING TO THE INTERNET ........................................................ 7-1 Connection Wizard ....................................................................... 7-1 Setting the GPRS Connection....................................................... 7-3 Starting GPRS Connection........................................................... 7-5 Disconnecting GPRS........................................
E-mail Server Setup ..................................................................... 9-5 Using E-mails and SMS ............................................................... 9-7 Direct Push Technology Alert..................................................... 9-10 Direct Push Technology Alert Settings .................................. 9-10 WINDOWS LIVE™ MESSENGER ...................................................... 9-12 Setting Up.....................................................................
Companion Programs / ..................................................... 11-1 CALENDAR: SCHEDULING APPOINTMENTS AND MEETINGS............. 11-2 Create an Appointment............................................................... 11-3 Use the Summary Screen............................................................ 11-4 Create Meeting Requests............................................................ 11-4 Schedule a Meeting................................................................
Synchronize Mobile Favorites.................................................. 11-29 Create a Mobile Favorite...................................................... 11-29 Save Pocket PC Memory ..................................................... 11-30 JAVA .............................................................................................. 11-31 12 Maintaining the Pocket PC / ............................................ 12-1 BACKUP UTILITY .......................................................
Voice Commander / ........................................................... 13-1 STARTING VOICE COMMANDER ...................................................... 13-2 VOICE COMMAND FORMAT ............................................................. 13-3 VOICE COMMANDER SETTINGS....................................................... 13-5 Contacts Settings Page............................................................... 13-5 Application Settings Page .................................................
X-10
1 Getting Started / Package Content Pocket PC, stylus, battery, Getting Started CD, user guide, AC adapter, USB cable, headset, leather case, Mobile phone strap. n o q p r t nPocket PC oStylus rUser Guide sUSB Cable pBattery tAC Adapter s qGetting Started CD Only the M810 has a video conference camera. The M750 does not support the video conference camera and the related features; otherwise it is identical in appearance to the M810.
External Views M810 Model 4 5 6 20 22 7 16 1 8 2 9 11 10 18 12 13 14 M750 Model 23 17 3 1-2 21 15 19
1. Volume control key 2. Voice Commander hot key 3. MicroSD slot 4. Hanging hole for Mobile phone strap 5. Phone Receiver 6. Charging / Mobile Phone / Bluetooth / WLAN / GPS LED indicator 7. Video conference camera 8. Display, Touch screen (Applies to M810) 9. Left Soft-Key 10. Right Soft-Key 11. 12. Send button 13. Navigation button. Press the End button 14. Phone Speaker center of the button to set as launch key. 15. Mini USB connector, Headset 16. Power button connector 17.
QWERTY Keyboard Close Open Hardware Hotkey Functions t n o 1-4 p q r s u v
Hardware Button n +/- oz p q r Short Press (Press once and release) Long Press (Press and hold for a few seconds and release) Adjust volume -- Connect to Voice Commander Connect to Notes Left Soft-Key. Soft-keys on left Appropriate GPS and right to operate function application will be linked buttons at bottom of display.
Using the Pocket PC for the First Time If you are opening this product for the first time, the main battery and the Pocket PC are packed separately inside the product package. Get your Pocket PC ready to go 1. Installing the SIM Card Turn over your Pocket PC and remove the back cover. Please pay attention to the direction of the missing corner of the SIM card, and then insert the SIM card into the slot. 2. Installing the Battery Place the battery in the back of Pocket PC.
Charging Power and Power Supply nConnect the AC adapter plug to any household power outlet. oConnect the other plug from the AC adapter to the USB port. The Pocket PC starts to charge automatically. pIf you need to connect Pocket PC and desktop computer, you could connect the USB cable to the USB port. And then connect the other end of the USB cable to the USB port on the desktop computer. Your Pocket PC will also charge at the same time.
1. It will take about 8 hours to fully charge the battery after the first time you open the package. Subsequent charging will only take about 3 hours. After charging, you can disconnect the AC adapter and carry the Pocket PC around portably. To maintain smooth operation, charge the power regularly. 2. View the battery icon on the upper right corner to check the power usage condition. 3. The LED indicator on the top of the Pocket PC will indicate the various functions that are currently in use.
Re-installation or Replacing the Battery If the phone, GPRS or wireless LAN connection function is already activated, deactivate it first and then replace the battery. Turn over your Pocket PC and remove the back cover. Place the battery in the back of Pocket PC. Make sure that the golden contacts are aligned to the battery box; gently insert the battery until it clicks. Then replace the back cover.
Power On and Off Power Button Power Off Mode 1. Press and hold the “Power Button” on the Pocket PC and then tap Yes to turn off the Pocket PC. All functions will be disabled; this is not the same as entering Sleep mode. 2. To turn on, simply press the “Power Button” once. Using the Stylus to Touch the Screen Your Pocket PC is designed for graphics-based operation. Generally speaking, we usually “use the stylus to perform basic actions such as tap, drag, and tap and hold” on the touch screen.
Sleep Mode 1. Press the “Power Button” of the Pocket PC to enter the Sleep mode. At this time, the screen is turned off and all peripheral devices enter the power-saving mode. But if the phone is turned on, it is still in the call waiting mode. 2. To turn on the screen later, just press the “Power Button.” 3. Tap , Settings, the System tab, Power and then the Advanced tab to set the device to turn off automatically after waiting for a certain time period.
Turn on the Screen This product is designed with a power-saving feature. If the screen is turned off, press the “Power Button” of the Pocket PC to turn it on. If the screen is too dark and you cannot see clearly, set the proper brightness level for the backlight. Tap , Settings, the System tab, Backlight and then the Backlight Level tab.
Restarting the Pocket PC Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen. For your consideration, factoring into your safety and convenience, please refer to the following instructions in order: 1. Reset Press the “Reset Button” of Pocket PC with the tip of the stylus. 2. Default Settings If the touch screen is functional, please tap procedures Programs, Utilities, and then Default Settings. 3.
Reset VReset method: Press the “Reset Button” of Pocket PC with the tip of the stylus. VAppropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen. VResult: In a moment, when Pocket PC automatically completes the system startup process, the last display will be the Today screen. This will retain the Microsoft Windows, factory pre-installed applications, user’s input data, newly installed programs, and user custom settings.
Default Settings Tap , Programs, Utilities, and then Default Settings. 1. If this application is inadvertently accessed, please select the to the upper right of the screen to exit, the system will not be affected. 2. If you are certain that you wish to perform this action, please select the data input block on the right, and enter the authorized code in the block to the left. Then tap the OK button.
Clean Boot VCold boot method: Hold the “Power Button” of the Pocket PC with one hand while holding the stylus tip to push in the “Reset Button” with the other. Simultaneously release both the “Power Button” and “Reset Button”. VAppropriate situation: If a previous reset has already been attempted and the Pocket PC is still unable to maintain normal operations, has no response, or if the screen is frozen.
Perform cold boot and hold the End Button . Please refer to the following instructions before careful consideration. ÁErase all data and load default? The default is “No.” If Yes or No was not selected, after a few seconds the system will automatically execute the default No. If you long press Left Soft-Key for a few seconds to select “Yes,” then the system will erase all data and load default. After your Pocket PC restarts, follow the instructions on the screen to complete. Caution! 1.
1-18
2 Using the Pocket PC / Start Screen Tap , Settings, the System tab, and then Screen. The first time you use or cold boot the pocket PC, the system will ask you to align the screen. Kindly continue to tap the center of each cross (+) that appears and follow the screen instructions to complete the operation. If you feel that the position is not quite accurate while tapping on the screen, you follow the help for this section to align the screen again.
The following steps will bring you into the touch screen calibration mode. These steps provide a faster and more efficacious way to enter the touch screen calibration mode. And they also provide a method of getting into Screen program for when the touch screen dislocation is so severe that you completely cannot select or do anything using the stylus. 1. Simultaneously press the Left Soft-Key on the bottom-left of the Pocket PC and the execution button in the center of the navigation pad. 2.
Today Screen When you turn on your Pocket PC for the first time each day (or after 4 hours of inactivity), you will see the “Today screen”. You can also display it by tapping and then Today. On the “Today screen”, you can see at a glance the important information for the day. n o pq r n s Start. Tap to switch to a program. oTap to enable or disable the GPRS t connection feature. p Antenna icon. Tap to turn the phone on or off. q Speaker icon. For adjusting volume. u v rTime.
The following table lists the icons that you may see on the Navigation Bar. Kindly refer to the “Meaning” column for explanation or tap on the icon to access the instant message.
Meaning Icon (Located on the Navigation Bar at the top of the screen) No signal. No service. The device has not yet connected to a network. Lost signal. The device is searching for a signal. Missed call Voice call in progress Data call in progress Calls are forwarded Call on hold Missed call Roaming GPRS not in use GPRS available GPRS connected Synchronizing over GPRS in use EDGE available EDGE connected Synchronizing over EDGE in use 3G network available 3G connected Synchronizing over 3G in use 3.
Meaning Icon (Located on the Navigation Bar at the top of the screen) Wireless LAN Active Wireless LAN Data Calling Wireless LAN in use Programs Download Programs For effective use of memory, the programs marked with an asterisk “*”, are posted on our website: http://www.glofiish.com for downloading. Refer to further instructions for use after downloading these programs. You can switch from one program to another by selecting it from the menu. (You can customize which programs you see on this menu.
Icon Programs Utilities Group Description Application Recovery, Backup Utility, Birthday Reminder *, Default Settings, M-Desk, Task Manager, WLAN Utility Voice Commander Voice Commander, Voice Commander Group Settings GPS Group GPS Viewer, Location SMS, Satellite Data Update ActiveSync Synchronize information between your Pocket PC and desktop computer. Calendar Keep track of your appointments and create meeting requests. Contacts Keep track of your friends and colleagues.
Icon Programs Java Description Supports Java; legal download and use of applications. Internet Sharing Simulate Pocket PC as a modem for the PC to surf the Internet. Search Quickly find the information you need. File Explorer Manages files or folders. Wireless Manager Manage wireless connections and related functions. You can also switch to some programs by pressing a program button. Your Pocket PC has one or more program buttons located on the front or side of the Pocket PC.
System Application Programs , Settings, the Personal tab Program Description Buttons Set the hot key for Pocket PC hardware button. Input Set the details about the input method. Lock Set the access rights and password of Pocket PC. Menus Set the items displaying on the Owner Information Input owner information. Phone Set the details about the phone. Sounds & Set the volume and notification method. Start menu. Notifications Today Set the look of Today screen and display information.
, Settings, the System tab Program About Description Display the important information about the Pocket PC. Backlight Set the details about the backlight and brightness. Certificates For network identification to prevent unauthorized access. Clock & Alarms Set the time and alarms. Headset Volume Set the highest output decibels for the headset Limiter volume. Memory View the memory usage, and the list of running programs, etc. Microphone Set the microphone volume.
, Settings, the Connections tab Program Band Selection Description Set the security validation method for the GPRS connection. (Applies to M810) Beam Set if receiving end will accept beam data automatically or not. Bluetooth Establish the connection between the Pocket PC and other Bluetooth capable devices. Connection Wizard Select the appropriate country and carrier name. Connections Set the network connection.
Spb Mobile Shell Spb Mobile Shell helps you smoothly to start a day-long life. On the Today screen, you just need one touch at Spb Mobile Shell. Quickly show the electric power condition, the date, the time, the weather forecast, and even easily using photo Speed Dial. 1. Touch or tap tabs to switch to other categories. 2. Tap and hold to display a pop-up menu of actions. nIf you check Auto-Hide Mode, you just need touch or tap the tabs to display the details.
4. Time Tab: Display time in three selected cities and next alarm information. 5. Weather Tab: Display weather forecast for the next four days. ÁTap and hold to display a pop-up menu of actions. 6. Photo Speed Dial Tab: Easily using Photo Speed Dial gives you the most pleasant way to dial. n nTap a not defined button to add your contact from Contacts. o oTap a defined button to call this contact. On the other hand, you can tap and hold to display a pop-up menu of actions.
Configure Your Spb Mobile Shell Tap and hold on the Spb Mobile Shell to display a pop-up menu, and then select Options to change the settings. Tap , Settings, the System tab, and then Spb Mobile Shell. nMove Up or Move Down: Tap to arrange the display order of these items in the Today screen. n Options: Some of the tabs may have customizable options. Replace: Replace the existing tabs o p from the standard listing. Add: Add a new tab. Remove: Remove the selected tab. oShow and hide the tab content.
Note: either of the following connections allows your Pocket PC to download the weather forecast data. If there is more than one connection available, the system will automatically select the best connection, in the following order: 1. Synchronization connection: Connect your Pocket PC to a PC (Desktop or Notebook). Please note that your PC must be online. 2. Wireless LAN connection. 3. GPRS connection: Roaming mode cannot update GPS data automatically. If necessary, change to manual mode.
Wireless Manager On the Today screen, tap Tap the to launch Wireless Manager. icon. When the message window appears, tap “Wireless Manager.” Tap , Programs and then Wireless Manager. Wireless Manager will assist you to manage the wireless connections of the Pocket PC.
2. Enter the Wireless Manager screen. n nSingle tap on these buttons to activate or disable each individual functions. The o icon indicates that the associated function is currently in the off state. p Tapping these buttsons will turn the icons orange, indicating that these functions are newly activated. To turn off these functions, simply tap on the buttons once again. Tap . When it becomes , the GPRS connection is available.
3. Managing wireless connectivity. nManager: Tap and hold for a few n seconds, and then release the button to enter the setup page. oAs indicated to the left, when the o color of the icons turns orange, this indicates that the function is p activated. Tapping these buttons again can quickly turn off the FM Tuner and GPS applications.
QuickBar Press and hold the Right Soft-Key to launch QuickBar. Tap , Programs, Utilities, and then QuickBar. You can launch programs from the Quick Bar. ÁTouch or tap any icon to launch a program. If you do not select, Quick Bar will quit after several seconds.
M-Desk Tap , Programs, Utilities, and then M-Desk. You can categorize programs on the panel according to your personal preferences. Categorizing, renaming, deleting or editing the text color of program names under M-Desk will not affect the default setting of the Pocket PC. n o nTap Phone, PDA or other tabs to switch to other categories. Tap and hold the tab to display a pop-up menu that allows you to Rename, Move forward or Move back. p q r s oThe program icon selected for this category.
ÁSystem category screen nThis category already has these n programs that are automatically o selected by the system which you cannot move or delete. All relevant information is updated automatically. oIf no storage card is installed, its p n o p icon changes to gray and will be marked with a red X. pChange screen orientation. ÁCategories Setup screen nExit the Categories Setup screen. oTap Phone, PDA or other tabs to select preferred programs.
Enter Information on Your Pocket PC You have several options for entering new information: 1. Use the input panel to enter typed text, either by using the soft keyboard or other input method. 2. Write directly on the screen. 3. Draw pictures on the screen. 4. Speak into your Pocket PC microphone to record a message. 5. Use synchronization tools to synchronize or copy information from your desktop computer to your Pocket PC. For more information, see Help on your desktop computer.
Using QWERTY Keyboard The keyboard layout of this product is standard US keyboard (as used on PCs). The keyboard is located underneath the screen of the Pocket PC. You can slide the display to access the keyboard. The screen automatically switches to landscape display at the same time to facilitate data input in the Notepad, Word Mobile, Excel Mobile and other applications. The display automatically switches back to portrait display as you close the keyboard.
Standard Keyboard Operation Functions Lower Case of You can input data in the lower case when no Letters function key is activated. Upper Case of 1. If you want to input the upper case of a letter, Letters , and Press the indicator will light up. press and then release key, the first letter you input will be in upper case, while the rest of will be in lower case. 2. If you want all letters in upper case: Press key twice to lock the key. Every letter you type key twice will be in upper case.
Standard Keyboard Operation Functions Delete 1. Press key to delete the character ahead of cursor. 2. Press key, and then press key to delete a character after the cursor. 3. Press key twice, and then press key to delete characters after the cursor continuously. Latin 1 Letters Input a letter and press and keys at the same time. The system will convert the letter into the corresponding Latin 1 letters. Press both keys continually until the desired letter appear on the screen.
Standard Keyboard Operation Functions Left Soft-Key The two hotkeys are located at the top row Right Soft-Key of the physical keyboard, above the W, E, 1, 2 keys. You can use these keys to run the function buttons at the bottom of the screen. For example, press the Left Soft-Key to run the View function at the bottom of the operating screen as shown below; while the Right Soft-Key calls the Menu function.
Enter Text Using the Input Panel Use the input panel to enter information in any program on your Pocket PC. You can either type using the soft keyboard or write using Letter Recognizer, Block Recognizer, or Transcriber. In either case, the characters appear as typed text on the screen. To show or hide the input panel, tap the Input Panel button. Tap the arrow next to the Input Panel button to see your choices. nSelect an input method. oTap to see your choices. pInput Panel button.
nTap here if this is the right word. n To change word suggestion options, such as the number of words suggested at one time, tap , Settings, the Personal tab, Input, and then the Word Completion tab.
Type with the Soft Keyboard 1. Tap the arrow next to the Input Panel button and then Keyboard. 2. On the soft keyboard that is displayed, tap the keys with your stylus. Use Letter Recognizer With Letter Recognizer you can write letters using the stylus just as you would on paper. 1. Tap the arrow next to the Input Panel button and then Letter Recognizer. 2. Write a letter in the box. When you write a letter, it is converted to typed text that appears on the screen.
Use Transcriber With Transcriber you can write anywhere on the screen using the stylus just as you would on paper. Unlike Letter Recognizer and Block Recognizer, you can write a sentence or more of information. Then, pause and let Transcriber change the written characters to typed characters. 1. Tap the arrow next to the Input Panel button and then Transcriber. 2. Write anywhere on the screen.
Write on the Screen In any program that accepts writing, such as the Notes program, and in the Notes tab in Calendar, Contacts, and Tasks, you can use your stylus to write directly on the screen. Write the way you do on paper. You can edit and format what you’ve written and convert the information to text at a later time. Write on the Screen Tap Menu and then check Draw to switch to writing mode. This action displays lines on the screen to help you write. nTap Menu and then check Draw.
Select Writing If you want to edit or format writing, you must select it first. 1. Tap and hold the stylus next to the text you want to select until the insertion point appears. 2. Without lifting, drag the stylus across the text you want to select. If you accidentally write on the screen, tap Menu, then Undo and try again. You can also select text by tapping Menu and then Draw to deselect it and then dragging the stylus across the screen.
Draw on the Screen You can draw on the screen in the same way that you write on the screen. The difference between writing and drawing on the screen is how you select items and how they can be edited. For example, selected drawings can be resized, while writing cannot. Create a Drawing Cross three ruled lines on your first stroke. A drawing box appears. Subsequent strokes in or touching the drawing box become part of the drawing. Drawings that do not cross three ruled lines will be treated as writing.
Select a Drawing If you want to edit or format a drawing, you must select it first. Tap and hold the stylus on the drawing until the selection handle appears. To select multiple drawings, tapping Menu and then Draw to deselect it and then drag to select the drawings you want. You can cut, copy, and paste selected drawings by tapping and holding the selected drawing and then tapping an editing command on the pop-up menu, or by tapping the command on the Menu menu.
Create a Recording 1. Hold your Pocket PC’s microphone near your mouth or other source of sound. 2. Press and hold the Record hardware button on your Pocket PC until you hear a beep. 3. While holding down the Record button, make your recording. 4. To stop recording, release the Record button. Two beeps will sound. The new recording appears in the note list or as an embedded icon. You can also make a recording by tapping the Record button on the Recording toolbar.
Voice Commander By default, the system sets the button on the side of the Pocket PC as the “Voice Commander Button.” Press this button to launch the Voice Commander. For details on how to use this function, please refer to the Voice Commander section.
3 Voice Command Satellite Navigation / Navigation Device Installation n o nPocket PC oCar Charger (* optional): when Pocket PC is low on power, recharge by connecting one end to the car cigarette lighter/12 volt power outlet and the other end to the socket on base of Pocket PC. Attention: The GPS signal receiver is built into the Pocket PC. If car windscreen has heat reflective metallic film, or Pocket PC is obstructed by objects, then the receptivity of the GPS will be adversely affected.
GPS Navigation Software Installation Please follow your car navigation system operating manual’s instructions on software installation in order to use the navigation function. Conditions for Using GPS Car Navigation By using this system you are agreeing to the following conditions: 1. When using this device, please use with matching car mount. Affix device securely to the car mount. Please be aware that installation in the areas depicted below is forbidden and is strictly prohibited.
2. Please set navigation destination before driving. Do not operate this system while driving. 3. Please use this system with care. If any harm results from careless use of this system, the responsibility for safe driving resides with the driver. 4. GPS positioning is limited by weather and usage location (tall buildings, tunnels, underpasses, trees, bridges). Most GPS do not work indoors, nor can GPS signals penetrate buildings, car sun shades and heat reflective film with metallic content.
Satellite Data Update (Not supported in USA) Tap , Programs, GPS, and then Satellite Data Update. Login to the provider’s server to download instant satellite data and enable the GPS function. Note: either of the following connections allows your Pocket PC to download the latest GPS data. If there is more than one connection available, the system will automatically select the best connection, in the following order: 1. Synchronization connection: Connect your Pocket PC to a PC (Desktop or Notebook).
ÁTap the Download Button to update the GPS data manually. The figure on the left shows how to download using the synchronization connection. ÁTap the Setting Button in the Satellite Data Update main screen to open the dialog in the left figure. n o nCheck the expiration checkbox to activate the reminder function on the due date. oThe default value is checked. The system will automatically update the data when online.
ÁWhen the GPS data has expired, n the relevant message displays on the top of the screen. nThe icon reminds you that your GPS data has expired. o oTap the Notification Button to open the message window. p 3-6 pTap to close the message window.
Location SMS Tap , Programs, GPS, and then Location SMS. You can utilize the GPS function offered by your Pocket PC, to send the matching location automatically found by this program and the necessary message to your contacts. This could be helpful in preventing kidnapping, reporting disastrous situations, calling for help in emergencies or locating an individual. In addition, we have formulated many SMS templates based on different situations for your convenience. n o p [ \ 1.
2. Select in the main screen, once in the screen shown on the left, tap on any message and tap OK Button to select. Further, by pressing and holding anywhere on the screen, together with the pop-up menu, you can add, edit or delete your most used messages. 3. The content of the message that your recipient views looks similar to what is shown on the left. Actual messages differ depending on the recipient’s device.
GPS Viewer Tap , Programs, GPS, and then GPS Viewer. You may use this Pocket PC to automatically search the GPS coordinates of your location and check if the GPS functions work properly. n o p [ n o p q 1. Run this program in a location with good signal reception. nGreenwich Mean Time (GMT): After connecting to a satellite and obtaining the GMT, it will be displayed on the screen. Tap to set the satellite time as the system time. oReport GPS tracking information. pTap to change the unit.
3-10
4 Using the Phone / The Phone feature on the Pocket PC allows you to perform the following tasks: V3.5 G video telephony. (Applies to M810) VMake and receive calls. VQuickly make calls or listen to voice mail without entering phone numbers using Contacts, Speed Dial, or your Call Log. VCheck the Call Log to see who has called, whom you have called, add a new number to Contacts, and access notes taken while you were on a call. VReceive calls and easily take notes during the call. VSend SMS messages.
Installing and Removing the SIM Card 1. Before installing the SIM card, launch Wireless Manager, then tap the button. When the color of the icon turns orange , this indicates that the wireless connection of the Pocket PC is disabled. 2. Press the “Power Button” of the Pocket PC to turn off the screen. 3. Installing the SIM Card Turn over your Pocket PC and remove the back cover. Please pay attention to the direction of the missing corner of the SIM card, and then insert the SIM card into the slot. 4.
Using the Phone p n o q nMicrophone oEarphone pPhone Receiver qPhone Speaker (Bottom of Pocket PC) Combination Operation Method Hold the Hold the Pocket Pocket PC PC and position manually the receiver close for calls to your ear and the Answer or End a Call Adjust Earphone Volume Press Send Button or End Button on the lower part of the Pocket PC. While answering a call, push the volume control key on the side of the Pocket speaker close to PC to test the your lips. earphone volume.
Adjusting the Phone Volume on the top and adjust all Tap programs’ sound functions under . Adjust the phone sound volume under . 1. When there is no call, you can push the volume control key on the side of the Pocket PC or use the stylus to tap the speaker icon Tap and then to adjust the ring volume of the incoming call. 2. Push the volume control key on the side of the Pocket PC or tap and then to adjust the phone volume. You can only do this during a call. on the top changes to . 3.
Turning the Phone On or Off and Making Calls Comparison of Product Features Only the M810 has a video conference camera. The M750 does not support the video conference camera and the related features; otherwise it is identical in appearance to the M810. The Speed Dial Button on the Phone main screen only applies to the M750. n o nCamera for Video call oAdjust earphone volume pRear side: The SIM card is located below the battery.
1. Turn on the phone nOn the Today screen, tap to launch Wireless Manager. oOr tap the icon. When the message window appears, tap “Wireless Manager.” to enable GSM. pTap qInput the PIN and wait for the phone to turn on. r changes to And the 2. Dial: Press . icon changes to to enter the Phone screen. Use the stylus to tap the telephone number and then tap the Talk Button. 3. Answer a call: Press 4. End a call: Press . . 5. Turn off the phone nOn the Today screen, tap to disable GSM.
Video Call (Applies to M810) If both parties of the call wish to enable the instant video communication function, the person you are calling must be equipped with a video enabled mobile phone and service system. Are you ready? Smile and say “Hello,” when you start a video call. 1. First select your contact or enter the number to call, and then tap the Video Call button. 2. To end the call, simply tap on the Video Call main menu. Don’t forget to say goodbye. 3. Video Call main menu. n nCall status.
Icon Meaning Set the contrast level. Accept or hide the video information of the callee. Use either front camera, rear camera, or close the camera. Mute or turn on the sound. Switch the video window display method. End call. Important! If the video call dial out is unsuccessful, it is possible to switch to normal voice calls. are icons related to connection features.
Toolbar nSmart Dialing: Enter the portion n o p q you remember and the system will use the fuzzy comparison method to list the matching contacts at area o on the figure. Please refer to the keyboard shown on the screen to enter information including the phone number and letters. Tap a contact to view contents. o pProvides the relevant menu. For example, select Options to change the phone setup such as ring tone, vibration mode, PIN code, etc. Or select Send Text Message to send SMS message.
The following table shows the icons that you may see on the Navigation Bar on the top of the screen. Signal Indicator Description SIM card unavailable. The phone is turned off. To turn it on, tap this icon. Network is searching or unavailable. Phone connection unavailable or network error. To turn it off, tap this icon. The phone is turned on and signal reception is normal. To turn it off, tap this icon. Active call. To switch back from other programs, tap this icon.
Call from Contacts Phone numbers entered in Contacts can be used to quickly locate phone numbers and make calls. 1. In the contact list, tap and hold the contact to display a pop-up menu. 2. Tap Call Mobile or Call Work on the pop-up menu. 3. Tap a contact to display the details. Call from Speed Dial (Applies to M750) On the Phone screen, tap Speed Dial Button to enter the following screen. nTap and hold on a certain contact. n o p The pop-up menu provides the Delete and Edit options for phone setup.
Call from the Call History Tap Call History Button on the Phone screen to enter the following screen. n o p q nTap Menu and then Filter to list the categories. To search, tap By Caller and follow the screen instructions to complete the operation. oTap this icon to redial this number immediately. pTap and hold the phone number area and tap the option you need on the pop-up menu. For example, tap Call to redial this number, tap Save to Contacts to add this number to the Phonebook.
Customize Your Phone Tap Menu, Options, and then the Phone, Services, Network… tabs to modify the relevant service setup. Note that the setup values you can change here depend on the services provided by your telephone company. Tap Menu, Options, and then the Phone tab. nYou can set the ring type as ring, vibration or mute. n oIf you want to use a customized o ring tone file, use the p synchronization program on your q desktop computer to copy the .
Tap Menu, Options, and then the Appreciation software tab. 1. Make sure that you have checked “Zoom SMS.” When you receive an SMS, a large mail icon will appear on the upper right of the Today screen, and you can open your newly received message by tapping on this icon. 2. If you check “Call Filter,” the representing icon will appear on the lower right of the Today screen. Add Ringtone Tap , Programs, Phone, and then Add Ringtone. 1.
Phone Application Programs Caution! Before you can use the functions described in the Phone Group. Make sure that the SIM card is properly installed in your Pocket PC and the Phone is already turned on. SIM Manager If your Pocket PC does not include this function, it means it is not supported and you can skip this chapter. Tap , Programs, Phone, and then SIM Manager. Standard Display SIM Manager manages the SIM Phonebook and duplicates the Phonebook entries. nSIM Phonebook n oName or Pos.
The following are the shared functions for standard screen or full screen display: sMenu Button: Provides the appropriate function table. SMS Management: Enter the SMS management screen. New SIM Contact: Add a new phonebook entry to the SIM card. Refresh: Tap to refresh the displayed contacts and SIM card information, after the Contacts are updated. tStandard Button: Provides Standard, SIM, Contacts three switching modes.
Copy Phonebook Information The function descriptions of this section are for standard screen and fullscreen display. Copying phonebook information between the SIM card and Contacts is either by “select one, select multiple, or select all” methods. For precise management of your phonebook that can be conveniently performed. nTap on the □ in the title to select Select all n all. oTap on the □ in front of a phonebook data entry to select this singl entry.
SMS Management Tap Menu and then SMS Management to enter the SMS management screen and to display the original SMS contents on the SIM card. nDouble tap the number in the Pos. column to view the corresponding SMS contents. n oTap the SMS you want to delete. When it is highlighted, tap Del selected SMS Button to delete this message from the SIM card. o pReturn to the SIM Manager p 4-18 screen.
SIM Value Add Service Tap , Programs, and then SimTKUI (SIM Tool Kit). Please install the SIM card that supports the SIM Toolkit function and the appropriate application will show up in Programs. Furthermore, the name of the application shown will differ from the services provided by the telecom service provider. ÁThis screen is for reference only. n The actual screen is based on the service items provided by your telecom company. nTap any service item. oSelect Button: Launch service item.
SMS Sender Tap , Programs, Phone, and then SMS Sender. Tap , Messaging, and then New. Press to bring up the Phone screen. Tap Menu and then Send Text Message. Enter the composing SMS screen in Messaging. n“Text Messages” means you are n editing SMS. o p oInput the mobile phone number. pInput the messages you want to send. q qTap Menu and then My Text to select canned messages or to edit your Text Messages. rTap to send SMS message.
Speed Dial Tap , Programs, Phone, and then Speed Dial. Hot Key Switch nTap the box according to the functions provided by the system. n oTap to switch between these functions: Frequency Dial → Index Dial. pTools Button: Provides the relevant o p menu. For example, select Settings to set the interface as Frequency Dial or Index Dial. Select Sound on/off to set the sound for tapping the screen. n o p q ÁTap Tools and then Color and Text to enter the Setting screen shown on the left.
Frequently Dialed Screen ÁFrequency Dial screen n nTap any phone entry box to speed dial. o oTap and hold the box, then select p appropriate command from the pop-up menu. q pSort according to the number of calls in descending order. The r upper left corner has the most number of calls while the lower right corner has the least number. q § ¨: Tap to view the previous or next page. rTap to switch to the Frequency Dial screen as shown on the left.
Index Dial n ÁIndex Dial screen o nSwitch to the Index Dial screen as shown on the left. oTap on any letters. The content displayed are the data created in Contacts. If you did not create any data in Contacts, the screen is blank. n nThe letter “F” appears on the upper left side of the screen (see left). This indicates that this page o contains all address data that starts with “F”. The English Address Book is arranged alphabetically using the First Name. p oTap any box to speed dial.
Call Filter * Download Programs For effective use of memory, the programs marked with an asterisk “*”, are posted on our website: http://www.glofiish.com for downloading. Refer to further instructions for use after downloading these programs. Tap , Programs, Phone, and then Call Filter. n o nTap Options and then New to add a new Block List. oTap and hold an entry in the list. Select from the pop-up menu to manage the list according to your p needs. pTap Options and then New to add a new Allow List.
ÁTap Options and then New to enter the screen shown on the left. n o nInput name and telephone number. oAdd to Tel List or SMS List. pOK Button qCancel Button Tap and hold a contact in the p Contacts screen. Select Add to q Call Filter from the pop-up menu to add a new entry to the Block List. ÁTap Options and then Other Config.. nBlock Record Settings tab: Select keeping time. n oSynchronize tab: Activate o synchronization.
Tap the icon or on the lower right of the Today screen to display the Call Filter Status window. ÁDisplay Call Filter setting status. nTap to hide the Call Filter Status window.
5 Customize Your Pocket PC / You can adjust the Pocket PC settings according to your personal preferences and install other programs. Adjusting Settings To see available options, tap , Settings, then the Personal or System tab located at the bottom of the screen. The following utilities allow you to adjust the settings based on your personal work style.
Notifications Your Pocket PC reminds you in a variety of ways when you have something to do. For example, if you’ve set up an appointment in Calendar, a task with a due date in Tasks, or an alarm in Clock & Alarms, you’ll be notified in any of the following ways: VA message box appears on the screen. VA sound, which you can specify, is played. VA light flashes on your Pocket PC. VThe Pocket PC vibrates. To choose reminder types and sounds for your Pocket PC, tap and then Settings.
Power Preference Settings Tap , Settings, the System tab, and then Power. View the power usage condition or perform the relevant power management settings. nPower icon Check this item, so that when you n o accidentally press the hardware buttons on the Pocket PC, the Pocket PC will not exit the sleep o p q mode. This will prevent unnecessary power consumption if a button is being pressed accidentally and not being discovered in time.
Backlight Tap , Settings, the System tab, and then Backlight. 1. Battery Power or External Power tab: Set the relevant backlight functions. 2. Backlight Level tab: Adjust the backlight level.
Microphone Profile Microphone * Voice Turn the volume down and find Surrounding Commander the proper volume setting for interference recorded voice control better recognition of system. when volume up. Turn the volume up. More distance from the Speech Cause recording lecturer more interference recorded. * Used for the version built in “Voice Commander.” Tap , Settings, the System tab, and then Microphone. 1. Use the slider to adjust volume of the recording mic. 2.
Headset Volume Limiter In order to protect the hearing of the user from excessive headset volume, this product is specially designed for this purpose. You will be able to configure the maximum volume output from the headset, making the maximum decibel the limit when adjusting the volume for headset reception. Tap , Settings, the System tab, and then Headset Volume Limiter. 1. Slider: Configure the maximum decibel for the headset output volume. 2. Default Button: Restore to default system settings.
Adjust Volume Push the volume control key on the side of the Pocket PC. Or use the icon on the top of the screen to adjust all program sound stylus to tap the functions under . Adjust the incoming call’s volume under . 1. Adjust volume: When set to On, use the stylus to tap and drag the slider up and down to adjust the volume. You can also push + or on the side of the Pocket PC. 2.
Scenarios Tap , Programs, Phone, and then Scenarios. nSelect an applicable mode. oDetails Button: Set the relevant options for this mode, such as volume, backlight, etc. n o ÁTap Details Button to enter the screen shown on the left. And then tap Settings Button to set the relevant options for this mode, such as volume, backlight, etc.
Task Manager On the Today screen, tap Tap Task Manager. , Programs, Utilities, and then Task Manager. Stop programs you are not currently using to free memory on your Pocket PC. n o p q r s t ÁAdvanced mode. nQuit from Task Manager. oStop the program you selected. pTap to activate the selected program. qDisplay with Wizard mode or Advanced mode. rStop all programs. sPage up or page down. Task Manager on the tTap Today screen. ÁWizard mode. nTap to activate the selected program.
Find and Organize Information The Search feature on your Pocket PC helps you quickly locate information. 1. Tap , Programs, and then Search. Input the text you want to find and then select the data type. Tap on Search to start the search. 2. To find information that occupies a larger space, select Larger than 64 KB for Type. Actually, you can use File Explorer to search for files and place these files into folders systematically. Just tap Explorer. n , Programs, and then File nTap to change folders.
Navigation Bar and Command Bar The navigation bar is located at the top of the screen. It displays the active program and current time, and allows you to switch to programs and close screens. Use the command bar at the bottom of the screen to perform tasks in programs. The command bar includes menu names, buttons, and the Input Panel button. To create a new item in the current program, tap New. To see the name of a button, tap and hold the stylus on the button.
Pop-up menus With pop-up menus, you can quickly choose an action for an item. For example, you can use the pop-up menu in the contact list to quickly delete a contact, make a copy of a contact, or send an e-mail message to a contact. The actions in the pop-up menus vary from program to program. To access a pop-up menu, tap and hold the stylus on the item name that you want to perform the action on. When the menu appears, lift the stylus, and tap the action you want to perform.
Redefine Hot Keys Tap , Settings, the Personal tab, and then Buttons. n p q o XButton 1 YButton 2 ZLeft Soft-Key qRight Soft-Key These hot keys can be redefined as launch keys for frequently used programs. V End Button and Send Button are exclusive phone functions so they cannot be redefined.
5-14
6 Synchronization / Windows Vista Part A PC with Windows Vista™ operating system can be used to enable connection and synchronize with your Pocket PC. The Windows Mobile® Device Center application can be used to manage your Pocket PC, and can provide Pocket PC access to other resources through the connected PC. The online services and application access can also keep the Pocket PC up-to-date with the connected PC.
1. Software installation: You could use the Getting Started CD to install Windows Mobile® Device Center on the personal computer. 2. Hardware installation: The USB cable is a plug-and-play device. Use the USB cable to connect your Pocket PC to your personal computer. USB Port ® 3. Using Windows Mobile Device Center nAfter installation is complete, the Setup Wizard helps you customize your synchronization settings.
Windows XP/2000/98 Part A PC with Windows XP/2000/98 operating system can be used to enable connection and synchronize with your Pocket PC. Using Microsoft® ActiveSync®, you can synchronize the information on your desktop computer with the information on your device. Synchronization compares the data on your device with your desktop computer and updates both computers with the most recent information.
Installing and Using ActiveSync Important Installation Notice Before you install ActiveSync, make sure that the USB cable on the Pocket PC is not connected to the personal computer. Connect the USB cable only after ActiveSync is installed. 1. Installing ActiveSync: You could use the Getting Started CD to install Microsoft ActiveSync version 4.5 or above on the personal computer. ActiveSync is already installed on your Pocket PC. 2. Hardware installation: The USB cable is a plug-and-play device.
3. Using ActiveSync nAfter installation is complete, the ActiveSync Setup Wizard helps you customize your synchronization settings. oOnce you use the USB cable to connect the two devices properly, the Set Up a Partnership screen appears on the personal computer. Set it up according to your requirements. The green icon appears on the status bar of your personal computer to indicate that it is Connected. pClick Explore on the Microsoft ActiveSync on the personal computer to access files in the Pocket PC.
FAQ About Synchronization Tap , Settings, the Connections tab, and then USB to PC. 1. Factory setting defaults to checking the box. 2. If you have followed the above installation and operation procedures and find that the connection between your Pocket PC and desktop PC still cannot be established, please uncheck the box shown on the left. USB Synchronization Before you start to synchronize, use the Pocket PC Getting Started CD to install synchronization tools on your personal computer.
ActiveSync synchronization settings: 1. After installation is complete, the Setup Wizard will continue to guide you. Adjust the specifications according to your actual needs. 2. Use the USB cable to connect the two devices properly and the Set Up a Partnership screen appears on the personal computer. Set it up according to your requirements. nClick OK. oClick Next. pCheck the items you want to synchronize. qClick Next.
rClick Finish. sAfter installation is complete, the ActiveSync Setup Wizard helps you connect your Pocket PC to your desktop computer, set up a partnership so you can synchronize information between your Pocket PC and your desktop computer, and customize your synchronization settings. Your first synchronization process will automatically begin when you finish using the wizard. tThe green icon appears on the status bar of the personal computer to indicate that it is Connected.
Synchronization Tool on Pocket PC Once you have set up ActiveSync and completed the first synchronization process, you can initiate synchronization from your Pocket PC. To switch to ActiveSync on your Pocket PC, tap , and then tap ActiveSync. For more information on how to use ActiveSync on your personal computer, run ActiveSync and refer to the ActiveSync online help. To learn more about the Pocket PC ActiveSync, switch to ActiveSync and tap and then Help. Just refer to the Help for more information.
Synchronizing using Bluetooth Without using the USB cable to connect the two devices, you can still synchronize using Bluetooth. The greatest advantage is that you don’t have to plug in and detach from the USB cable so often. This is especially useful for managing several Pocket PCs. For details on Bluetooth devices, refer to “Using Bluetooth” section.
7 Connections / Connecting to the Internet This section teaches you how to use GPRS wireless network connection. GPRS wireless networking is a convenient function for working at home or while traveling. You can use the Pocket PC to browse websites and read or send E-mails, SMS or MSN messages. Make sure that your telecom company provides this service and apply for a SIM with GPRS function. If you already have a SIM card, all you need to do is apply for the GPRS function from your service provider.
Tap , Settings, the Connections tab, and then Connection Wizard. 1. Select the country name from the list. 2. Select the carrier name from the list. 3. According to actual requirements, select the carrier name, and then tap Add Button or Edit Button. Or use the New Button to add the new network connection. 4. Search Button: Detect the currently available telecommunication service. If it is found, use the Add Button to add the highlighted selection.
Setting the GPRS Connection Tap , Settings, the Connections tab, Connections, and then the Tasks tab. 1. As shown in the screen on the left tap “Add a new modem connection.” 2. Enter the “Make New Connection” screen as shown in the screen on the left. nInput a new connection name for convenience in making connections in the future. oSelect “Cellular Line (GPRS).” pLastly tap Next.
3. Input the Access Point Name provided by your telecom company and tap Next. 4. Input your personal information such as account number, and tap Finish.
Starting GPRS Connection 1. Turn on Phone: Tap or icon at the top of the screen and tap and “Wireless Manager.” Tap input your PIN to enable GSM. The icon will change to the 2. Tap icon changes to while . in the Wireless Manager. When it becomes , the GPRS connection is available. 3. Tap , then tap Settings to link to Connections. You are ready to connect GPRS. are icons related to connection features.
4. Connect GPRS: Select “Manage existing connections” in Connections. Tap and hold on the newly created connection name, and then select Connect to finish GPRS connection. 5. Input your account information in the Logon Network screen and tap to login to the network. 6. After the connection is established, the icon will change to . 7. Now you can use the appropriate program to access the Internet, receive or send E-mails, etc. Disconnecting GPRS 1. Disconnect GPRS: Tap and the message window appears.
GPRS Settings Tap , Settings, the Connections tab, and then GPRS Settings. Please note that this setting will differ with the security authentication method provided by your telecom service provider; contact your service provider before making any changes. ÁConfigure the security authentication method for the GPRS connection.
Band Selection (Applies to M810) Tap , Settings, the Connections tab, and then Band Selection. Please configure the band type based on your service plan of your service provider; ask your service provider before making any changes. ÁIf AUTO is chosen, the system will select the band to use based on the telecom and network configuration.
Using Bluetooth Bluetooth is a short-distance wireless communication technology with an effective range under 10 meters (30 feet). When the Bluetooth power is turned on, the indicator will blink blue. Bluetooth LED indicator (Blue) to 1.Tap launch Wireless Manager. to enable 2.Tap Bluetooth. Bluetooth capable devices such as the PC, Pocket PC, Bluetooth headset etc. can be connected to this product for the convenience of data sharing.
Setup the Bluetooth Connection On the Wireless Manager screen, tap and hold the button, then release to enter the Bluetooth manager. Tap , Settings, the Connections tab, and then Bluetooth. Tap Bluetooth and then Devices tab. 1. Select “Add new device” and the system will begin to search for nearby Bluetooth devices. 2. The search results will be similar to the screen to the left. Select the device to connect with the list. n nAll Bluetooth devices found nearby o the system.
Pair for Bluetooth headset: When the system asks for the password, please refer to the instructions provided with your purchased Bluetooth headset. Pair for PC or Pocket PC: When the system asks for the password, please make sure that the identical password is entered to both devices. 3. Your Pocket PC connected with these devices will be able to transfer data, receive calls on a n Bluetooth headset, and other applications. o nSuccessfully connected devices will be shown as on the screen to the left.
Tap Bluetooth and then Mode tab. 5. Configure the Bluetooth related options for your Pocket PC. Tap , Settings, the Personal tab, and then Owner Information. Enter the name that you wish to show in the Name field. At the same time, other Bluetooth capable devices can recognize your Pocket PC by this name.
Internet Sharing Tap , Programs, and then Internet Sharing. This function provides a simulated modem function for the Pocket PC to connect to the PC. The built-in Bluetooth paring or USB port can be connected with the PC and provide Internet access on the PC. 1. The USB connection is used as an example. 2. Complete the connection setup between the Pocket PC and PC. The network connection and configuration can be attained from your telecom service provider. 3.
CSD Line Type Tap , Settings, the Connections tab, and then CSD Line Type. You must first apply for Circuit-Switched Data (CSD) service from your telecom company before you can use this function. In short, this function is similar to the modem dial-up in a personal computer. By simulating the Pocket PC as a modem and connecting through the built-in GSM device, you can use the Pocket PC to access the web. ÁThis figure is for reference only.
Connecting with a Personal Computer For more information, refer to “Synchronization” section. Wireless LAN Transmission On the Today screen, tap to launch Wireless Manager. For more information, refer to “Using Wireless LAN” section.
7-16
8 Using Wireless LAN / Connecting to Wireless LAN This section teaches you how to use the Pocket PC’s built-in wireless LAN function to connect to the Internet. It is convenient for you to browse websites and send/receive E-mails through wireless networks at certain locations where wireless networking services are provided.
On the Today screen, tap Tap to launch Wireless Manager. , Programs and then Wireless Manager. n nThis icon will show up on your o screen whenever your Pocket PC p network and has connected to that has detected a usable wireless network, indicating that your Pocket PC has successfully connected to the network hotspot (Access Point). The LED indicator on the Pocket PC will blink amber. oTap to connect or disconnect to your wireless network, a means that this function has been disabled.
Configure Your Wireless Network WLAN Setup Scenarios Location Home Office Select Networks Proxy Connection , Settings, the 1. Close Proxy connection Connections tab, Connections, the 2. Not required to set Proxy Advanced tab, Select Networks Button, and then select My Work Network from “Programs that automatically connect to the Internet should connect using:” menu Refer to the above and set as My Work Network Network key or Access Point 1. Authentication: Select Open 2.
Configure Your Wireless Network (Reference for a normal network setup) You will need a correct IP address, DNS name server address, Proxy server, and connection port number to setup your connection. If you have purchased a wireless Internet service account, then the service desk at the location where you will be connecting will provide you with this information, or, you should obtain this information from the network administrator of your company.
4. As shown on the left, make sure that My Work Network is selected for both items, and finally tap to save and exit. My Work Network is the WLAN connection method. As this option is from a choice of two, the next time you need to use the GPRS connection, you will have to refer to the above listed steps, select My ISP for the first item. 5. At the Wireless Manager screen, tap and hold, and then release the button to enter the WLAN Utility screen. 6.
7. Select name of a currently available network to enter the WLAN authorization setup screen. 8. Set accordingly to the rules and information provided by the hotspot location. nAuthentication: Select Open oData Encryption: Select WEP to enable the entry bar about Network key pNetwork key qKey index 9. Tap and hold on the name of the network connection that you can currently use, then select Connect. When the icon appears on the top of the screen, your wireless network has been successfully connected.
Configure Your Wireless Network (Reference for Proxy setup) To successfully configure your network, you will need the following information: a correct IP address, DNS name server address, Proxy server, and connection port number, etc. Please obtain the above listed information from your company’s network administrator. If your company’s networking environment doesn’t need Proxy server settings, please close the proxy connection. Tap , Settings, the Connections tab, Connections, and then the Tasks tab.
The above is applicable to an office environment that requires a Proxy setup. For others that close the proxy connection, please do not check the box named “This network connects to the Internet” and skip the following procedures. 3. Enter the name into the “Proxy server” field. 4. Select the Advanced button and enter the advanced settings screen. 5. You can modify the settings by tapping the HTTP type. 6. Enter the number into the “Port” field. Finally, tap exit.
9 Sending and Receiving Messages / Tap and then Messaging. X nTap to select an account. oTap to setup a new E-mail account. pTap to select the highlighted account above. qChange the account settings. Or delete a message. Y Z [ X ÁFunctions of the Messaging screen: Y nSelect the service and folder you Z want to display. [ oSelect the sort order for messages. pTap to open a message. qTap and hold to display a pop-up menu of actions. rProvides the relevant menu.
E-mails and SMS Messages Refer to “Connecting to the Internet” section to learn how to connect the Pocket PC to the Internet and start using Messaging to send and receive E-mails and SMS messages. This section explains the basic preparations and processing principles. If you have any questions, refer to online help about Pocket PC or synchronization. Use Messaging to send and receive E-mails messages in either of these ways: 1.
Synchronizing E-mail Messages If you want to synchronize e-mails with company or home usage, please refer to this section. E-mail messages can be synchronized as part of the general synchronization process. You will need to enable Inbox synchronization in synchronization tools. For information on enabling Inbox synchronization, see Help on the desktop computer. During synchronization: 1. Refer to “Connecting to the Internet” section.
Connecting Directly to the Mail Server For single-machine use, not combining office and home E-mails, please refer to “E-mail Server Setup” section. You will receive messages directly from the mail server. This is irrelevant to personal computer use. You can work online or offline. When working online, you read and respond to messages while connected to the e-mail server. Messages are sent as soon as you tap Send, which saves space on your Pocket PC.
E-mail Server Setup Refer to this section if you are preparing for single-machine use and not combining office and home E-mails. If you already have an E-mail account from your ISP or company network, you can use Messaging to send and receive mails and messages. To establish a new Messaging E-mail server on your Pocket PC, refer to the following sections. 1. Obtain the following information from your ISP or company’s network administrator for convenience in setting up the E-mail service.
3. Select “Other” for the e-mail source. 4. Select “Other (POP/IMAP)” for the e-mail provider. 5. Follow the instructions on the screens to setup the E-mail account. 6. Refer to “Connecting to the Internet” section or “Using Wireless LAN” section to connect the Pocket PC to the Internet and you can start sending and receiving E-mails and SMS messages. 7. Connecting to the E-mail server: nTap Messaging, Menu, Go To, and then check “Other (POP/IMAP)”. oTap Menu and then Send/Receive.
Using E-mails and SMS Below is a brief description of the Messaging screen functions: n o p q nSelect the service and folder you want to display. oSelect the sort order for messages. pTap to open a message. qTap and hold to display a pop-up menu of actions. r s t rStatus bar sTap to change the account settings. tTap to delete a message.
Brief description on writing, sending, reading and replying (to) mail: 1. Send and Receive Mail: Tap Menu and then New to compose a message and then tap Send to send it. o n p n q r s nTap To, Cc or Bcc to open the Contacts screen. As long as you have set up Contacts beforehand, you can just tap to select. oTap the data area to input the E-mail adress, mobile phone number and subject directly. If there is more than one contact, use a semi-colon (;) to separate the addressees.
2. Read and Reply: Receive new mails by tapping Menu and then Send/Receive. Switch to the “Inbox” folder and tap to open. The following figure shows the open mail screen. ÂBesides reading the messages, provide frequently-used functions for replying to or forwarding. 3. Change preference settings. nSet the Inbox Synchronization option in synchronization tools. oTap Messaging, Menu, Tools, Options, and then the Accounts, Message … tabs on the Pocket PC to set the appropriate options.
Direct Push Technology Alert The Direct Push Technology alert function will enable you as a corporate user to never miss another e-mail, using the Pocket PC for the best business service. Through the synchronization feature, your Pocket PC can instantly and automatically receive important e-mails from Microsoft Exchange Server.
2. Obtain the server address, user name, network etc. from the company network administrator to successfully setup the server data. 3. Tap Menu and then Schedule. The Peak times and Off-peak times provide a As items arrive option, this is the direct push technology alert function.
Windows Live™ Messenger To switch to Windows Live™ Messenger, tap , Programs, and then tap Messenger. Windows Live™ Messenger on your Pocket PC is an instant messaging program that lets you: VSee who is online. VSend and receive instant messages. VHave instant message conversations with groups of contacts. For more information on using Windows Live™ Messenger, tap and then Help. To use Windows Live™ Messenger, you must have a Microsoft Passport™ account or a Microsoft Exchange e-mail account.
Setting Up The first time you use: Tap , Programs, and then Messenger. On the Today screen, tap Messenger to display the Windows Live™ Messenger sign-in screen. Before you can connect, you must enter Passport or Exchange account information. 1. Tap Messenger on the Today screen. 2. Tap Sign in.
Working with Contacts If you already use Windows Live™ Messenger on your desktop computer, your contacts will show up on your Pocket PC without being added again. The Windows Live™ Messenger window shows all of your messenger contacts at a glance, divided into Online and Offline categories, or sorted by groups. From this view, while connected, you can chat, send an e-mail, block the contact from chatting with you, or delete contacts from your list using the pop-up menu. nTap a contact to start a chat.
Chatting with Contacts Tap a contact name to open a chat window. n nView full chat. oEnter your message in the text entry area, and tap Send. pReturn to the contacts list, and o select a contact to chat with. p qThe contact you are chatting with. q \Provides the relevant menu. For example, to invite another \ contact to a multi-user chat, select Options and then Add participant, and tap the contact you want to invite.
MMS Message Tap , Messaging, and then MMS. Tap , Programs, Phone, and then MMS Message. The MMS Message mailbox is very similar to ordinary E-mail mailbox function. “Inbox” saves the MMS that you received while “Outbox” saves the MMS that you are going to send. “Sent” saves a backup copy of the MMS sent successfully. “Drafts” saves incompletely edited MMS messages. Create and Edit MMS How to compose a new MMS message: 1. Tap MMS.
n o p 2. Tap Menu and then New to add a new MMS. nTap to change the MMS sort method. oSelect the folder types you want to display in the list. pTap to manage your MMS mailbox. q qProvides the relevant menu. 3. Choose Custom to edit, or select any MMS sample.
n o p 4. If Custom is selected, there will be a customizable MMS sample at the MMS editor. q nTap To button to select a phone number or E-mail address from your Contacts. You can tap the entry area to input the phone r number or E-mail address also. s ^ oTap to show or hide the complete _ header. ` pTap to input the subject. qTap the specified area to insert the picture/video file. rTap the specified area to edit text. sTap the specified area to select the audio file.
Birthday Reminder * Download Programs For effective use of memory, the programs marked with an asterisk “*”, are posted on our website: http://www.glofiish.com for downloading. Refer to further instructions for use after downloading these programs. Tap , Programs, Utilities, and then Birthday Reminder. Combines Contacts and this application, you may store birthdays and anniversary dates in the Contacts card first.
2. For adding a new contact, you may n tap New on the main screen. nUse the scroll bar to scroll the pages. oFind the Birthday or Anniversary o field and enter the data. 3. For setting the corresponding n o features, you may tap Settings on the main screen. nTap the check box to display a popup message for reminding. oThe options of reminding methods. Remind you once: at 8:00 A.M. Remind you two times: at 8:00 p A.M. and noon. Remind you three times: at 8:00 A.M., noon and 6:00 P.M.
4. When the reminding date you set comes, the Pocket PC phone will popup a message on the screen to remind you. 5. Tap the icon on the top of screen and tap Preview to enter the birthday or anniversary reminder settings screen. 6. Moreover, you may tap the , or , icons on the calendar of main screen. n nYou may send a SMS, MMS, make a phone call or send an email to him/her after selected corresponding icons. o p oShow you that you ever sent greeting messages to this contact.
9-22
10 Multimedia / Using Camera Pocket PC Exterior and Photograph Functions Front and Sides 1 2 4 3 5 1 6 7 8 9 Rear 10 11 12 1. Camera hotkey, camera shutter, camcorder button 3. Activate or disable the flash 5. Digital zoom 7. Select front or rear camera lens (Applies to M810) 9. MicroSD card slot 11. Flash or light 2. Select the storage location 4. Quit Camera 6. Switch between photograph and video modes 8. Adjust brightness 10. Self portrait mirror 12.
Pocket PC Exterior and Video Functions Front and Sides 1 2 3 4 1 5 6 7 Rear 8 9 10 1. Camera hotkey, camera shutter, 2. Select the storage location camcorder button 3. Quit Camera 4. Digital zoom 5. Switch between photograph and 6. Adjust brightness video modes 7. MicroSD card slot 8. Self portrait mirror 9. Light 10.
How to Use the Camera? Filming Tips For example, to take a self-portrait, face the light source and avoid dark surroundings or your back to the light source for better results. Press the Tap button on the Pocket PC. , Programs, Multimedia, and then Camera. Action Instructions Scenery or Portrait 1. Point the screen of the Pocket PC toward you. (Default) 2. If the screenshot is good, press the camera shutter on the side of the Pocket PC to take the picture.
Action Scenery or Portrait (Default) Instructions 3. If you are in the photograph mode from the guidance wizard, pressing the camera shutter will link you to the applications. For more information about the provided tools, please refer to the later descriptions. 4. Tap Self Portrait to continue with the next shot. 1. (Applies to M810) First tap along the bottom of the screen. When the icon changes to , the front camera lens will be used. 2.
Video Video Instructions 1. Switch to the video mode. 2. Face the Pocket PC toward you. 3. If the screenshot is good, press the camcorder button on the side of the Pocket PC to begin filming. 4. During filming, the green dot and Ready icon at the upper left of the screen will turn to a red dot with flashing numbers of time lapsed.
Video Video Instructions 5. Press the camcorder button again to stop filming. If you are in the video mode from the guidance wizard, stopping filming will link you to the applications. For more information about the provided tools, please refer to the later descriptions. 6. Tap to continue with the next video segment.
Common Tools for Photograph The Camera can be used to take pictures or videos, and this chapter will introduce the common tools for photograph and icons on the screen. The previous chapter introduces hardware hotkeys on the Pocket PC that can also control some of the tool icons shown on the screen. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1. Switch between photograph and video mode. 2. Remaining shots. 3. Macro mode. 4. Activate flash. 5. Number of shots for the “Continuous Shot” mode. 6.
Common Tools for Video The Camera can be used to take pictures or videos, and this chapter will introduce the common tools for video and icons on the screen. The previous chapter introduces hardware hotkeys on the Pocket PC that can also control some of the tool icons shown on the screen. 1 2 3 4 5 6 7 8 9 10 11 12 1. Switch between photograph and video mode. 2. Record status: When the recording begins, the green dot will become a red dot. 3. Activate or disable the sound of camcorder button. 4.
Advanced Setup for Photograph or Video n o p ÃTap the onscreen to open the advanced setup screen for the Camera. to end. nTo save the setup, please tap to switch between the previous page or next page of the setup. oTap pAlong the bottom of the screen are the function buttons. Tap to show the corresponding options for the function. Photograph Video Descriptions Select the environment lighting (white balance). Select the resolution, higher resolutions lead to larger files. -- Macro mode.
Photograph Video Descriptions Activate or disable the “Continuous Shot” function; -- the number of shots can be selected for the “Continuous Shot” function. Please note that the resolution must be lower or equal to 640x480. Activate or disable the sound of shutter or camcorder button. Activate or disable the wizard guided capture mode. Display or hide the date and time; the preview -- screen will not show the time, but the saved file will be marked with the timestamp. Adjust brightness.
Multimedia Manager Tap , Programs, Multimedia, and then Multimedia Manager. You can use Multimedia Manager to manage and view multimedia information such as pictures, music, videos, etc. Preview Multimedia Information n nSelect the folder you want to o display. p oTap to change the order of the list. pPreview thumbnail. Set according q to the multimedia information placed in the folder. If you are r s t u browsing pictures, tap a thumbnail to display the full picture.
Slide Show Function Tap Multimedia Manager, View, and then SlideShow. n nDouble tap anywhere on the screen to exit the slideshow. oPlaying the last picture while not in the slide show looping mode, tap o the screen and then tap the icon to exit the slideshow. ÁRefer to the method described above to exit the slideshow and enter the screen shown on the left. nSelect the picture scale, rotation and view picture properties. n o oLink to other available programs. p pFull-screen view.
Multimedia Manager Tools Tap Multimedia Manager, Tools, and then Setting. n nSlideshow tab: As shown on the left, this is the settings of the slideshow mode. oAssociation tab: Select the desired o p file type you want to open with Multimedia Manager. pFile Browse tab: Set the browsing method. n Tap Multimedia Manager, Tools, and then Delivery. nTap thumbnail. The ; in the upper left corner indicates that it is already selected. oNext: Select the program to link to.
Image Maker * Download Programs For effective use of memory, the programs marked with an asterisk “*”, are posted on our website: http://www.glofiish.com for downloading. Refer to further instructions for use after downloading these programs. Tap , Programs, Multimedia, and then Image Maker. Image Maker is used to create, edit and view pictures. Use it to view and edit the pictures you take. You can also use the relevant Image Maker commands and tools such as rotate, stretch, brightness, etc.
Icon Meaning of the Drawing Tool Box Select foreground and background colors Eraser Pick color Pencil for writing and drawing lines Airbrush Line Curve Rectangle Ellipse Polygon Rounded rectangle Text Select Fill with color Magnifier Brush Icon Meaning of the Drawing Toolbar New document Open Save Multimedia 10-15
Image Wizard * Download Programs For effective use of memory, the programs marked with an asterisk “*”, are posted on our website: http://www.glofiish.com for downloading. Refer to further instructions for use after downloading these programs. Tap , Programs, Multimedia, and then Image Wizard. Image Wizard provides frames, icons, filters and simple drawing tools that you can use to process photos and pictures. Wizard will guide you to complete the process step-by-step.
n o nReturn to the previous step. oInput a name for the file and select the file saving path. pUse system name and save to the specified path. p qSend tab: Send through E-mail or MMS Message.
FM Tuner Tap , Programs, Multimedia, and then FM Tuner. This program is for listening to the radio with headset. The headset will improve radio quality with its built-in antenna. n o p [ \ ] ^ _ nTool bar: cScreen off: This function turns off the screen but leaves the program running. Turn on the power to activate the screen. When the Pocket PC enters sleep mode, the system will shut down the program. dMy Favorite: Manage My favorite radio station list. eBand: Change the band frequency.
n ÁSet the station frequency. nTap and edit the frequency to set a custom station. Note: The frequency must be in the legal range. o oCancel. p pOK. qDelete the previous digit. q n ÁTap the My Favorite Button in the main screen to set My favorite station. o nClose and save the setting. p oThe default value is EUROPE. To q \ change the setting, hold the desired tab for a few seconds. pMy favorite station list. qChoose an empty item and tap the + button in the tool bar to edit the station.
Namecard Manager Tap , Programs, Multimedia, and then Namecard Manager. Provides full name cards management for scanning paper name cards into a digital format. The contacts database from Pocket PC can also be integrated into a unified contacts book. Digitize New Name Cards 1. Tap Recognize. 2. Tip: Before taking a picture, please take the following pointers to improve recognition quality.
3. Take pictures Prepare a name card and adjust the position. Press the shutter to the side of the Pocket PC to take the shot. You can directly select on the screen to take a picture. 4. Name card recognition XSelect Language to choose the appropriate language for this name card. YSelect or Identify to recognize the contents on the name card.
X 5. Modify the name card’s contents and confirm XSelect the contents field to make modifications. YWhen selecting the contents field, the name card source will be shown Y Z [ for verification. Double tap on the name card area to zoom to the max viewing. \ ZSelect the field name to modify and adjust the error recognitions. [Choose whether to keep this data entry. \Add this name card to the contacts database on the Pocket PC. Go back to Contacts to view the new entry.
Name Cards Management 1. Tap Manage. X Y Z 2. Main screen for name card management Only recognized name cards will be shown here. [ XEnter the quick search page. Tap a letter and the results for name cards created in Namecard Manager \ will be shown. YDelete the entered text to the left. s ZSearch criteria for name card. All ^ matching name cards for “Name, Work, or Tel” will be shown on the screen. To search for all name cards, please leave the field blank.
[Name card index display area, select an entry to expand its contents. \Display area for the original name card. ]Provides the relevant menu. New: Create a new digital name card. Import: Supported format includes BMP, JPG, and PNG. An existing name card image file can be imported and then processed. Edit: Modify the name card information. Delete: Delete the selected name card. ^Return to the previous page. 3.
11 Companion Programs / Microsoft® Pocket Outlook includes Calendar, Contacts, Tasks, Messaging, and Notes. You can use these programs individually or together. For example, e-mail addresses stored in Contacts can be used to address e-mail messages in Messaging. Using synchronization tools, you can synchronize information in Microsoft Outlook or Microsoft Exchange on your desktop computer with your Pocket PC. You can also synchronize this information directly with a Microsoft Exchange server.
Calendar: Scheduling Appointments and Meetings Use Calendar to schedule appointments, including meetings and other events. You can check your appointments in one of several views (Agenda, Day, Week, Month, and Year) and easily switch views by using the View menu. nTap to go to today. oTap to display or edit the n o appointment details. pView menu. qTap Menu and then New Appointment to create a new appointment.
Create an Appointment n Tap to return to the calendar (the o n appointment is saved p q automatically). r oTap to choose from predefined text. pTap to choose from previously s entered locations. qTap to select a time. rTap to select a date. sNotes is a good place for maps and directions. 1. If you are in Day or Week view, tap the desired date and time for the appointment. 2. Tap Menu and then New Appointment. 3. Using the input panel, enter a description and a location. Tap first to select the field. 4.
Use the Summary Screen When you tap an appointment in Calendar, a summary screen is displayed. To change the appointment, tap Edit. n nView appointment details. oView. pTap Menu and then Edit to change o appointment. p Create Meeting Requests You can use Calendar to set up meetings with users of Outlook or Pocket Outlook. The meeting request will be created automatically and sent either when you synchronize Inbox or when you connect to your e-mail server.
Schedule a Meeting 1. Create an appointment. 2. In the appointment details, hide the input panel, and then tap Attendees. 3. From the list of e-mail addresses you’ve entered in Contacts, select the meeting attendees. The meeting notice is created automatically and placed in the Outbox folder. For more information on sending and receiving meeting requests, see Calendar Help and Messaging Help on the Pocket PC.
Contacts: Tracking Friends and Colleagues Contacts maintains a list of your friends and colleagues so that you can easily find the information you’re looking for, whether you’re at home or on the road. n nTap and enter part of a name to quickly find it in the list. o oTap to display the contact details. p pTap and hold to display a pop-up q menu of actions.
Create a Contact 1. Tap New. And then select a contact type. 2. Using the input panel, enter a name and other contact information. You will need to scroll down to see all available fields. 3. To assign the contact to a category, scroll to and tap Categories and select a category from the list. In the contact list, you can display contacts by category. 4. To add notes, tap the Notes tab. You can enter text, draw, or create a recording.
Find a Contact There are four ways to find a contact: VIn the contact list, enter a contact name in the box under the navigation bar. To show all contacts again, clear text from the box or tap the button to the right of the box. VIn the contact list, tap Menu, Filter and then select the type of contact that you want displayed. To show all contacts again, select All Contacts. To view a contact not assigned to a category, select No Categories.
Use the Summary Screen When you tap a contact in the contact list, a summary screen is displayed. nView contact details. All of the n available contact information is listed, you can tap and use easily. oProvides the relevant menu. o For example, select Edit to change the contact information. Or select Save to SIM or Save to Contacts to duplicate to Contacts or SIM phonebook. p pTap to view notes.
Tasks: Keeping a To Do List Use Tasks to keep track of what you have to do. n nIndicates high priority. oTap to display or edit the task details. o pTap and hold to display a pop-up menu of actions. p qTap to change the status. rProvides the relevant menu. q r For example, tap Filter to select the category of tasks you want displayed in the list. Tap Sort By to select the sort order of the list. Or tap Options to change the way information is displayed in the list.
Create a Task 1. Tap Menu and then New Task. 2. Using the input panel, enter a description. 3. You can enter a start date and due date or enter other information by first tapping the field. If the input panel is open, you will need to hide it to see all available fields. 4. To assign the task to a category, tap Categories and select a category from the list. In the task list, you can display tasks by category. 5. To add notes, tap the Notes tab. You can enter text, draw, or create a recording.
Use the Summary Screen When you tap a task in the task list, a summary screen is displayed. To change the task, tap Edit. n o nView task details. oTap to show and hide additional summary information. View notes. p p qTap to change task.
Notes: Capturing Thoughts and Ideas Quickly capture thoughts, reminders, ideas, drawings, and phone numbers with Notes. You can create a written note or a recording. You can also include a recording in a note. If a note is open when you create the recording, it will be included in the note as an icon. If the note list is displayed, it will be created as a stand-alone recording. nTap to change the sort order of the n list. o oTap to open a note or play a recording.
Create a Note 1. Tap New. 2. Create your note by writing, drawing, typing, and recording. For more information about using the input panel, writing and drawing on the screen, and creating recordings, see “Enter Information on Your Pocket PC.” n nTap to return to the note list (the note is saved automatically). oTap to show or hide the input panel. pProvides the relevant menu. For example, check View Recording Toolbar to add a o p 11-14 recording to the note; or check Draw to write on the screen.
Word Mobile Word Mobile works with Microsoft Word on your desktop computer to give you easy access to copies of your documents. You can create new documents on your Pocket PC, or you can copy documents from your desktop computer to your Pocket PC. Synchronize documents between your desktop computer and your Pocket PC so that you have the most up-to-date content in both locations. Use Word Mobile to create documents, such as letters, meeting minutes, and trip reports.
n o p nSelect the type of folder you want displayed in the list. oTap to change the sort order of the list. Tap to open a document. q p qTap and hold an item to see a pop-up menu of actions. r rTap to create a new document. You can change the zoom magnification by tapping View and then Zoom. Then select the percentage you want. Select a higher percentage to enter text and a lower one to see more of your document.
Using the input panel, enter typed text into the document. For more information on entering typed text, see “Enter Information on Your Pocket PC.” To format existing text and to edit text, first select the text. You can select text as you do in a Word document, using your stylus instead of the mouse to drag through the text you want to select. You can search a document to find text by tapping Menu, Edit and then Find/Replace. n nTap to return to the document list o (changes are saved automatically).
Excel Mobile Excel Mobile works with Microsoft Excel on your desktop computer to give you easy access to copies of your workbooks. You can create new workbooks on your Pocket PC, or you can copy workbooks from your desktop computer to your Pocket PC. Synchronize workbooks between your desktop computer and your Pocket PC so that you have the most up-to-date content in both locations. Use Excel Mobile to create workbooks, such as expense reports and mileage logs.
Excel Mobile provides fundamental spreadsheet tools, such as formulas, functions, sorting, and filtering. To display the toolbar, tap View and then check Toolbar. n nCell contents appear here as you enter them. oSelect cell contents for the resource o of chart. pInsert Chart Button p qAutoSum Button q rZoom Button r ÁTap Format Chart Button to modify the relevant information, such as titles, scale, type and series.
Tips for Working in Excel Mobile For more information on using Excel Mobile, tap and then Help. Note the following when working in large worksheets in Excel Mobile: VView in full-screen mode to see as much of your worksheet as possible. Tap View and then check Full Screen. To exit full-screen mode, tap View and then Full Screen to restore. VShow and hide window elements. Tap View, Show and then tap the elements you want to show or hide. VFreeze panes on a worksheet.
PowerPoint Mobile View PowerPoint slides created in PowerPoint 97 and above versions on your desktop computer. The supported formats include .ppt and .pps files. n o p nSelect the type of folder you want displayed in the list. oTap to change the sort order of the list. pTap to open a file, and play the slides. qTap to open the file you played last time. q r rProvides the relevant menu. ÁTap on the lower left corner to open the menu. Tap End Show to quit.
Windows Media Player Use Microsoft Windows Media Player for Pocket PC to play digital audio and video files that are stored on your Pocket PC or on a network. To switch to Windows Media Player for Pocket PC, tap , Programs, and then Windows Media. nUse full-screen to view video. oDisplay website. Find music or video to be played from website. pReturn to the start of the current file or previous file. u qTap to play or pause. t rTap to skip to the next song. n op q r sTap to adjust volume.
Use Microsoft Windows Media Player on your desktop computer to copy digital audio and video files to your Pocket PC. For more information about using Windows Media Player for Pocket PC, tap , and then tap Help.
Streaming Player Tap , Programs, and then Streaming Player. Some audio and movie files that cannot be played back from Microsoft Windows Media Player, for example RTSP, HTTP… types of files, will be automatically switched to Streaming Player by the system. nEnter the setup page, specify the file to playback. oZoom in or out of the video ` u t n o pq rs content. pPlay or pause. qStop. rMute or enable sound. sAdjust volume level. tProvides the relevant menu.
ÁAt the Streaming Player main n screen, select Open to enter the page similar to the left. o nWhen using Internet Explorer to run media files not supported by Windows Media, the system will automatically switch to the p Streaming Player for playback. q You can also directly enter the URL. oSelect from the played history list. pTap Connect to run the file specified in the URL field. qProvides the relevant menu. Select Clear History to clear the entered information.
Internet Explorer Using Internet Explorer Use Microsoft® Internet Explorer Mobile to view Web or WAP pages in either of these ways: VDuring synchronization with your desktop computer, download your favorite links and mobile favorites that are stored in the Mobile Favorites subfolder in Internet Explorer on the desktop computer. VConnect to an Internet service provider (ISP) or network and browse the Web. To do this, you’ll need to create the connection first, as described in “Connect to the Internet”.
Browse the Internet Refer to “Connecting to the Internet” section to connect the Pocket PC to the Internet and start browsing websites. 1. Tap and then Internet Explorer. 2. Input the site address into the address bar at the top of the screen and connect to this site. 3. Use the scroll bar at the right side or bottom of the screen, or press the up or down button on the Pocket PC to view the contents of the entire website.
View Mobile Favorites and Channels nTap the favorite you want to view. oTap to add or delete a folder or n favorite link. o 1. Tap the Favorites button to display your list of favorites. 2. Tap the page you want to view. You’ll see the page that was downloaded the last time you synchronized with your desktop computer. If the page is not on your Pocket PC, the favorite will be dimmed.
Favorite Links During synchronization, the list of favorite links in the Mobile Favorites folder on your desktop computer is synchronized with Pocket Internet Explorer on your Pocket PC. Both computers are updated with changes made to either list each time you synchronize. Unless you mark the favorite link as a mobile favorite, only the link will be downloaded to your Pocket PC, and you will need to connect to your ISP or network to view the content.
5. Synchronize your Pocket PC and desktop computer. Mobile favorites that are stored in the Mobile Favorites folder in Internet Explorer are downloaded to your Pocket PC. If you did not specify an update schedule in step 3, you will need to manually download content to keep the information updated on your desktop computer and Pocket PC. Before synchronizing with your Pocket PC, in Internet Explorer on your desktop computer, click Tools and then Synchronize.
Java Important! Only applications from a reliable source may be downloaded, installed, and executed. Tap , Programs, and then Java. You can download Java games, e-books, applications powered by Java technology to your Pocket PC. Run Java files with the following methods: Connect to the Internet for downloads: Tap Menu, Install, and then Browser. A wizard will guide you to connect to the Internet. You can use Internet Explorer to download some Java files. Follow the onscreen instructions to complete.
ÁJava main page. n nTap to launch the item. oLaunch highlighted item. pProvides the relevant menu. For example, select Install and then Browser to connect to the o p Internet and play Java games that have been downloaded. Select Install and then Local Files to launch the items already downloaded to your Pocket PC. Use the Left Soft-Key, Right Soft-Key, Navigation button, and the launch key to control the games, read e-books and other applications.
12 Maintaining the Pocket PC / Backup Utility Tap , Programs, Utilities, and then Backup Utility. Backup Utility is used to back up or restore files saved in the Pocket PC. You can back up personal data such as Calendar, Contacts, Tasks, Personal profile, Network settings, Messaging (E-mails and SMS), etc. Storage Space When making backups, you can choose the following storage spaces: 1. My Documents: Data saved here may disappear when you perform a cold boot.
Backup Files Wizard Mode nTap Backup. Next Button and the oTap Wizard will guide through the steps that follow. n p Standard: Switch to the Standard mode. o p Standard Mode Backup your personal data to a storage space. ÁTap the Backup tab. n nTap to check the items for backup. o oTap to select the storage space p from the list. pTap Backup Button to start the backup. q q 12-2 Advanced Button: Enter the Advanced settings screen.
Advanced Settings Options Advanced Button to enter the Under the Backup Files screen, tap Advanced settings screen as shown below. ÁCheck the options as required. nIf you check this option, the Wizard will guide you through the n steps to complete the operation the next time you open Backup Utility. o oCancel Button p pOK Button ÁIf you checked “Auto backup files,” tap to enter the screen n shown on the left. o p q nSelect the backup option. oSelect the site to backup to.
ÁIf you checked “Auto backup on schedule,” tap to enter the screen shown on the left. n o p nBackup frequency. q oTap the date button on the right of “Starting” to set the starting date. pTap the time button on the right of “Starting” to set the starting time. qIf you have selected “Weekly,” tap the function button on the right of “Every” to set the day of the week to backup. ÁIf you selected “Manage old backup files,” tap to enter the screen shown on the left.
Restore Files Caution! 1. When restoring files, the system will delete all current data in the Pocket PC and replace it with the backup files. 2. To make sure that files can be restored successfully, do not use the Pocket PC while performing restore. 3. Restore cannot be stopped once it is started. Think carefully before proceeding. 4. After restore completed, your Pocket PC will reboot. Wizard Mode nTap Restore. Next Button and the oTap Wizard will guide through the steps that follow.
Standard Mode Restore the backup personal data from a storage space. ÁTap the Restore tab. n nSelect “Latest” below “Restore o From.” Or select from the list. p oTap backup file name from the list under “File Name.” pTap restoring.
Adding or Removing Programs Programs added to your Pocket PC at the factory are stored in ROM (read-only memory). You cannot remove this software, and you’ll never accidentally lose ROM contents. All other programs and data files added to your Pocket PC after factory installation are stored in RAM (random access memory). You can install any program created for your Pocket PC, as long as your Pocket PC has enough memory.
5. Double-click the *.exe file. nIf the file is an installer, the installation wizard will begin. Follow the directions on the screen. Once the software has been installed on your desktop computer, the installer will automatically transfer the software to your Pocket PC. oIf the file is not an installer, you will see an error message stating that the program is valid but it is designed for a different type of computer. You will need to move this file to your Pocket PC.
Add a Program to the Start Menu Tap , Settings, the Personal tab, and then Menus. ÁCheck the box for the program. If you do not see the program listed, you can either use File Explorer on the Pocket PC to move the program to the Start Menu folder, or use synchronization tools on the desktop computer to create a shortcut to the program and place the shortcut in the Start Menu folder.
VUsing synchronization tools on the desktop computer: Use the Explorer in synchronization tools to explore your Pocket PC files and locate the program. Right-click the program, and then click Create Shortcut. Move the shortcut to the Start Menu folder in the Windows folder. The shortcut now appears on the menu. For more information, see Help. Remove Programs Tap and then Settings. On the System tab, tap Remove Programs.
Manage Memory View Memory Status Tap , Settings, the System tab, and then Memory. ÁTap the Main tab. n nThe status of Storage and Program memory. oFind: Quick link to the Search program. o ÁTap the Storage Card tab. n nCurrent storage card memory o status. oTap to select the built-in or external storage card.
ÁTap the Running Programs tab. nTap a program name in ”Running Programs List” and when it is n highlighted, tap Activate or Stop. oActivate: Start running the program you selected. o Stop: Stop the program you selected. Stop All: Stop all programs in the “Running Programs List.” Find Available Memory Under certain circumstances such as insufficient memory, the Pocket PC cannot allocate memory automatically. Try to solve this problem through the following methods: Tap , Programs, and then Search. 1.
1. Tap , Programs, and then File Explorer. Use File Explorer to move the files you want to keep to external storage cards. Tap and hold the items to be moved, then tap Cut or Copy on the pop-up menu. Move to the storage card and then tap Paste. 2. Use File Explorer to delete files that you no longer need. Tap , Messaging, Menu, Tools, Options, and then the Storage tab. ÁCheck “Store attachments on storage card” to save attached files from E-mails automatically in the storage card in future.
Tap , Programs, Notes/Word Mobile/Excel Mobile, Menu, and then Options. 1. Enter the Notes file list screen. 2. Tap Menu and then Options. 3. Tap the “Save to” function button and select SDMMC from the list. This indicates that you are using your external storage card. Hereafter, new files will be automatically saved to this storage card. Follw the same operation procedure for Notes in Word Mobile and Excel Mobile.
System Information Tap , Settings, the System tab, and then System Information. ÁTap + or - to display or hide the system information.
12-16
13 Tap Voice Commander / , Programs and then Voice Commander. Voice Commander is continuous voice recognition application software in the Pocket PC. Voice Commander allows the user to use their own voice to dial and control functions. Voice Commander has the following features: Fully voice-controlled system that allows the user to complete operations (such as dialing phone or running applications) quickly without using hands.
Starting Voice Commander Here are two methods for running Voice Commander: 1. Tap , Programs, Voice Commander, and then Voice Commander. 2. Voice Commander Button. The system sets the button on the Pocket PC as the exclusive “Voice Commander” button. Just press this button to run Voice Commander. nShow the format of voice command. n oRe-Start Button: Restart Voice Commander. pMenu Button: Settings: Setup Voice Commander. Help: About Voice Commander. o p Exit: Exit Voice Commander.
Voice Command Format Press the Voice Commander Button on the Pocket PC and enter the Voice Commander screen.
Tips All the names in Contacts will automatically become recognizable contacts in the “Voice dialing” syntax. However, if the number of contacts exceeds 1000 entries, the system will not recognize the excessive entries. To add these entries to Voice Commander for recognition, tap Menu and then Settings or run Voice Commander Settings to check and add these contacts manually for voice recognition.
Voice Commander Settings There are two ways to run Voice Commander Settings: Tap , Programs, Voice Commander, and then Voice Commander Settings. Tap Menu and then Settings while using Voice Commander. Voice Commander Settings allows the user to personalize the Voice Commander settings, add and remove contacts or applications within the recognition range, record voice tags or play commands to prompt the user on how to say the correct command.
q Play Button: Play the recorded voice tag for this contact and hear how it is pronounced. Build Button: Record the voice tag for this contact again. r Delete Button: Delete the voice tag for this contact. s tContacts tab: Sets the voice commands for Contacts. Application tab: Sets the voice commands for applications. Digit Training tab: Sets the voice command for digital dialing. Advanced Settings tab: Sets the length and sensitivity for digital dialing.
Tips You can choose which Contacts are to be added to the recognizable range of the Voice Commander. By default, the system automatically adds all names within the recognizable range. If the number of Contacts exceeds 1000 entries, the system will not recognize the excessive entries. To add these contacts to Voice Commander for recognition, manually check the check boxes in front of the contact entries.
Application Settings Page Tap Voice Commander Settings and then the Application tab and the Settings page will list the applications and settings installed by the Pocket PC on and then Programs (whether or not it is selected, with or without voice tag). You can choose which applications are to be added to the recognizable range of the Voice Commander. By default, the system automatically adds all applications as recognizable targets in the < Application > syntax in “Voice open application.
Application example: You want to record Windows Live™ Messengers as “Chat room.” 1. Tap Windows Live™ Messengers. 2. Tap Build Button. 3. When you hear a beep, say the words “Chat room” that you want to record. 4. When you hear a second beep, say “Chat room” again. 5. After recording twice, the system will play the voice you just recorded to indicate that you have created a voice tag. 6.
Music Settings Page Tap Voice Commander Settings and then the Music tab, the settings page will list the music files and configuration status of the specify folder in your Pocket PC or on your storage card. If you add a new music file, the system will update in real-time, automatically adding the file to your recognizable range, saving you the time of searching for your music files. The system will automatically activate music files stored in the following folders: 1. All folders on your storage card. 2.
n o p nCheck box function If the music file name is checked, it can be identified normally. If unchecked, this indicates that it is not within the recognizable range. q r s If the check box is gray and cannot be checked, this indicates that the item is unrecognizable. Build a voice tag to add a gray item into the recognizable range. o Lips icon: Voice tag is built. pTapped music file name is highlighted and can be used with functions.
Advanced Settings Page The Sensitivity setting is for voice recognition. The “Length of phone number” setting specifies the maximum number of digits that can be entered as the phone number. These settings will improve recognition accuracy. nSensitive: When you use this setting, the voice recognition n system is not as strict while performing voice recognition tasks, in other words, under this setting the system will respond to your voice most of the time and you won’t have many non-responsive situations.
FAQ Question: I want to make a call to my friend Andy Miller, but I’m tired of reading manuals. What do I need to know if I just want to make phone calls? Answer: Make sure you have Andy Miller’s name and phone number in the contact database. Press the Voice Commander Button, and say “Call Andy Miller.” The system will guide you through it. Question: I added a new contact but it is not recognized. Answer: 1. The system only recognizes English words and characters or digits.
Question: I performed digit training today, but I found that the accuracy is worse than before, what do I do now? Answer: You can retry the digit training again in a “quiet” place. And if it still doesn’t help, disable the adapted model and use the default one. To disable the adapted model, tap Voice Commander Settings, the Digit Trainer tab, and then uncheck “Use adapted model.” Or just tap Remove All Button to remove the model. It will save you some memory this way.
14 Item Specifications / Description Operating system Windows Mobile® 6 Professional Processor Samsung S3C 2442, 500 MHz Memory 256 MB Flash ROM, 64 MB SDRAM Display 2.8", 240 x 320 (QVGA), 65,536 colors, TFT-LCD M810 HSDPA / UMTS (2100/1900/850 MHz) Communication GSM Quad-band 850/900/1800/1900 MHz EDGE class 10, GPRS class 10 Bluetooth® v2.0 Class 2 + EDR WiFi IEEE 802.
Item Software Support Description Application and games: Java support Java applications: Supports MIDP 2.0, CLDC 1.1 Digital Rights Management: Supports OMA DRM 1.
15 Regulation Notice and Safety Declaration / SAR Information Read this manual carefully before using. Warning: Reduced electromagnetic waves. Please use properly. Model M810 M750 GSM Head 0.436 W/kg@10g 0.407 W/kg@10g DCS Head 0.277 W/kg@10g 0.117 W/kg@10g WCDMA2100 Head 0.
Health and Safety Information Electrical and Battery Safety U Use only the AC adapter provided with this product. Do not use similar items from other products. The provided AC adapter is for use with this product only. Do not use it for other electrical products. U Follow the specifications of the battery manufacturer: Avoid charging the battery when the environmental temperature is higher than 45ºC. Do not store or use the battery when the environmental temperature is higher than 50ºC.
Warranty Security U In case the Pocket PC is damaged, kindly return it to your place of purchase. Do not attempt to disassemble this device on your own as this may void the warranty. U If any hazards result from the failure of the user to comply with usage rules, we will not be held responsible for any resulting warranty claims. Data Security U This company is not responsible for any data loss or damage to the Pocket PC due to improper use.
Safety In Aircrafts U Due to the possible interference caused by this product to an aircraft's navigation system and its communications network, using this product on board an airplane is against the law in most country. Interference With Medical Equipment Functions U This product may cause medical equipment to malfunction. The use of this device is forbidden in most hospitals and medical clinics. Environment Restrictions U Do not use this product in gas or refueling stations.
Explosive Atmospheres U When in any area with a potentially explosive atmosphere or where flammable materials exist, the product should be turned off and user should obey all signs and instructions. Sparks in such areas could cause an explosion or resulting in bally injury or even death. Users are advised not to use the equipment at refueling points such as service or gas stations.
15-6
16 FAQ / 1. What features does the Pocket PC have? Answer: nBuilt-in 802.11b/g wireless networking module. oThe built-in camera module’s sensitization, filming quality are better than other brands of Pocket PC in the same class. pThe latest Windows Mobile® 6 Professional operating system, with all its settings stored on a Flash ROM. You won’t have to worry about losing your data even if the Pocket PC runs completely out of power.
3. My Pocket PC cannot boot. What should I do about it? Answer: nMake sure the Pocket PC battery you use still has enough power. oPlug your Pocket PC into the charger, and make sure the red charging indicator lights up. Press the “Power Button.” pIf you have done the above but your Pocket PC still cannot boot, proceed with the following step: Remove the Pocket PC back cover, and check the battery lock is in place. If not, the system cannot be started. 4.
5. Why doesn’t my Pocket PC make any sound? Answer: nTap the speaker icon on the top right of the screen, then select the volume control options, or adjust the volume of the incoming call sound. oAlternatively, you may use the volume control key to control the volume. 6. Why does my Pocket PC screen automatically become dark? Answer: Tap , Settings, the System tab, Backlight, and then the Battery power or the External power tab.
8. The characters on the screen are too small to read. How can I enlarge them? Answer: Tap , Settings, the System tab, Screen, and then the Text size tab. You may adjust the text size as you wish. Also, you may select the landscape orientation in the General tab screen. Try and change them so that you can read more smoothly. 9. The contact point of my stylus is not quite precise.
11. My Pocket PC's Activesync cannot be executed or make a connection. What should I do about it? Answer: nMake sure you have installed Activesync version 4.5 or above. The companion CD contains the software. If you have lost the CD, you may download it from the Microsoft Website. oMake sure the charger as well as the USB cable provided along with the product are already connected up to your PC end.
16-6
17 3 3.
Connect GPRS · 7-6 Excel Mobile · 2-6, 11-18 Connection · 3-4 Expansion slot · 14-1 Connection Wizard · 2-11, 7-2 Connections · 2-11, 7-1 Contacts · 2-7, 11-6 Create a Contact · 11-7 Create a Note · 11-14 Create a Task · 11-11 Create an Appointment · 11-3 CSD Line Type · 2-11, 7-14 D Default Settings · 1-13, 1-15, 2-7 F Favorites · 11-28 File Explorer · 2-8, 5-10, 12-13 Find a Contact · 11-8 Find Information · 5-10 Flashlight LED · 1-3 Flight Mode · 2-16 FM Tuner · 2-6, 10-18 Free memory · 5-9 Fully c
I Image Maker · 2-6, 10-14 Image Wizard · 2-6, 10-16 Input · 2-9 Input Panel button · 2-27 Install the external headset · 4-3 Installing ActiveSync · 6-4 Installing the Battery · 1-6, 4-2 Installing the SIM Card · 1-6, 4-2 Interface/Audio · 14-2 Interface/Data · 14-2 Internet Explorer · 2-7, 11-26, 11-27 Internet Sharing · 2-8, 7-13 J Java · 2-8, 11-31 Java support · 14-2 Messenger · 2-7, 9-12 Microphone · 2-10, 4-3, 5-5 MicroSD slot · 1-3 Microsoft® ActiveSync® · 6-3 Microsoft® Internet Explorer Mobile ·
Pictures & Videos · 2-7 S Pocket PC · 1-1 Satellite Data Update · 2-7, 3-4 Pop-up menus · 5-12 Satellite Navigation · 3-1 Power · 1-11, 2-10, 5-3 Scenarios · 2-6, 5-8 Power button · 1-3 Screen · 2-1, 2-10 Power Button · 1-10, 1-11, 1-12, 4-2 Search · 2-8, 5-10, 12-12 Power Off Mode · 1-10 Select a Drawing · 2-34 Power supply · 14-2 Select Writing · 2-32 PowerPoint Mobile · 2-6, 11-21 Send and Receive Mail · 9-8 Preview mirror · 1-3 Send button · 1-3 Processor · 14-1 Send Button · 4-3, 4
Start Menu · 12-9 V Storage Space · 12-1 Vibrate · 5-7 Streaming Player · 2-7, 11-24 Vibration mode · 4-4 Stylus · 1-1 Video Call · 4-7 Stylus holder · 1-3 Video conference camera · 1-3 System Information · 2-10, 12-15 Voice Command Format · 13-3 T Tap · 1-10 Tap and hold · 1-10 Task Manager · 2-7, 5-9 Tasks · 2-7, 11-10 Time · 2-3 Today · 2-9 Voice Commander · 1-3, 2-7, 2-36, 13-1, 13-2 Voice Commander Button · 2-36 Voice Commander hot key · 13-2 Voice Commander Settings · 2-7, 13-5 Volume con
17-6
First Version: Current Version: Number: May 2008 May 2008, Version 1 20080430