Operation Manual

Voice Command Satellite Navigation 3-9
GPS Viewer
Tap ,
Programs
,
GPS
, and then
GPS Viewer
.
You may use this Pocket PC to automatically search the GPS
coordinates of your location and check if the GPS functions work properly.
1.
Run this program in a location with
good signal reception.
n
Greenwich Mean Time (GMT):
After connecting to a satellite and
obtaining the GMT, it will be
displayed on the screen.
Tap to set the satellite time as the
system time.
o
Report GPS tracking information.
p
Tap to change the unit.
[
Switch to Satellite mode.
2.
Tap
Satellite
to switch to Satellite
mode.
n
Red: Satellite detected (In View).
Blue: Satellite data detected (Data
Valid).
Green: Tracking completed
(Tracker).
o
Signal strength: The larger the
figures, the stronger the signal.
p
Satellite ID: The IDs expressed in
numbers in this field correspond to
the IDs on the earth image above.
q
Switch to Compass mode.
o
[
n
p
q
o
n
p