GPS Pocket PC Phone User Manual
Safety Instructions U Please Read Before Proceeding. U Avoid heavily pressing on the touch screen. U Avoid heavily pressing on the touch screen with the stylus or your fingers. U This product is not charged when shipped from the factory. When you use this product the first time, we recommend that you install the battery as illustrated and fully charge it for about 8 hours before use.
Where to Find Information For information on: See this source: Programs on your Pocket PC This User’s Guide and Pocket PC Help. To view Help, tap and then Help. Additional programs that can The Pocket PC Getting Started CD. be installed on the Pocket PC Connecting to and Check the user’s guide that comes with this synchronizing with a desktop product or look for the online help relevant computer to synchronization tools on the desktop PC or the Pocket PC. Up-to-date information on http://www.
User Manual SAFETY INSTRUCTIONS ........................................................................ 2 WHERE TO FIND INFORMATION ............................................................ 3 1 Getting Started / .................................................................... 1-1 PACKAGE CONTENT .......................................................................... 1-1 EXTERNAL VIEWS ............................................................................. 1-2 Hardware Hotkey Functions ...
2 Using the Pocket PC /............................................................ 2-1 START ............................................................................................... 2-1 Screen........................................................................................... 2-1 Today Screen ................................................................................ 2-3 Programs......................................................................................
3 Voice Command Satellite Navigation / ................................ 3-1 NAVIGATION DEVICE INSTALLATION ................................................. 3-1 GPS NAVIGATION SOFTWARE INSTALLATION .................................... 3-2 CONDITIONS FOR USING GPS CAR NAVIGATION ............................... 3-2 SATELLITE DATA UPDATE (NOT SUPPORTED IN USA) ....................... 3-4 LOCATION SMS ................................................................................ 3-7 GPS VIEWER ..............
Hot Key Switch.................................................................................. 4-19 Frequently Dialed Screen................................................................... 4-20 Index Dial........................................................................................... 4-21 Call Filter *................................................................................ 4-22 5 Customize Your Pocket PC /................................................. 5-1 ADJUSTING SETTINGS ...
7 Connections / ......................................................................... 7-1 CONNECTING TO THE INTERNET ........................................................ 7-1 Connection Wizard ....................................................................... 7-1 Setting the GPRS Connection....................................................... 7-3 Starting GPRS Connection........................................................... 7-5 Disconnecting GPRS..........................................
9 Sending and Receiving Messages / ....................................... 9-1 E-MAILS AND SMS MESSAGES ......................................................... 9-2 Synchronizing E-mail Messages................................................... 9-3 Connecting Directly to the Mail Server ....................................... 9-4 E-mail Server Setup ..................................................................... 9-5 Using E-mails and SMS .............................................................
MULTIMEDIA MANAGER ............................................................... 10-11 Preview Multimedia Information ............................................. 10-11 Slide Show Function................................................................. 10-12 Multimedia Manager Tools ...................................................... 10-13 IMAGE MAKER * ........................................................................... 10-14 IMAGE WIZARD *.....................................................
INTERNET EXPLORER .................................................................... 11-24 Using Internet Explorer ........................................................... 11-24 Browse the Internet .......................................................................... 11-25 View Mobile Favorites and Channels............................................... 11-26 The Mobile Favorites Folder ................................................... 11-26 Favorite Links ......................................
Voice Commander / ............................................................. 13-1 STARTING VOICE COMMANDER ...................................................... 13-2 VOICE COMMAND FORMAT ............................................................. 13-3 VOICE COMMANDER SETTINGS....................................................... 13-5 Contacts Settings Page............................................................... 13-5 Application Settings Page ...............................................
X-10
1 Getting Started / Package Content Pocket PC, stylus, battery, Getting Started CD, user guide, AC adapter, USB cable, headset, leather case, Mobile phone strap (X650 only).
External Views 5 25 26 6 7 8 1 2 3 10 11 28 13 14 15 16 17 18 19 20 21 1-2 27 9 12 4 22 23 24
1. Volume control key 2. Voice Commander 3. Reset button 4. Headset jack 5. Hanging hole for Mobile phone 6. Phone Receiver strap 7. BT / WLAN / GPS active LED 8. Power / Phone active LED 9. Display, Touch screen 10. Left Soft-Key 11. Right Soft-Key 12. Start hot key 13. OK hot key 14. Send button 15. 16. Hot key reserved for GPS AP End button 17. Hot key for QuickBar 18. Joystick, Navigation key M-Desk Today screen QuickBar… 19. MicroSD slot 20. Phone Speaker 21.
Hardware Hotkey Functions v m n o Hardware Button m n o p q r s t u v w 1-4 p q r t s u w Long Press (Press for a few seconds and release) Short Press (Press once and release) - Adjust volume Zoom in/out during camera mode Connect to Voice Commander Connect to Notes Reset Button -Left Soft-Key. Soft-keys on left and -right to operate function buttons at bottom of display.
Using the Pocket PC for the First Time If you are opening this product for the first time, the main battery and the Pocket PC are packed separately inside the product package. Get your Pocket PC ready to go 1. Insert the SIM card into the SIM card slot with its golden contacts facing down. Follow the picture indicated on the Pocket PC. 3. Back cover 2. Main battery 4. Follow the direction in the illustration to install the main battery. 5.
Charging Power and Power Supply nConnect the AC adapter plug to any household power outlet. oConnect the other plug from the AC adapter to the USB port. The Pocket PC starts to charge automatically. pIf you need to connect Pocket PC and desktop computer, you could connect the USB cable to the USB port. And then connect the other end of the USB cable to the USB port on the desktop computer. Your Pocket PC will also charge at the same time.
1. It will take about 8 hours to fully charge the battery after the first time you open the package. Subsequent charging will only take about 3 hours. After charging, you can disconnect the AC adapter and carry the Pocket PC around portably. To maintain smooth operation, charge the power regularly. 2. View the battery icon on the upper right corner to check the power usage condition. 3. The LED indicator on the upper right of Pocket PC will display the charging and function usage status.
Re-installation or Replacing the Battery If the phone, GPRS or wireless LAN connection function is already activated, deactivate it first and then replace the battery. 1. Slide and remove the back cover of Pocket PC. 2. You may poke down to unlock the main battery lock in order to remove the battery. 3. Replace the main battery and lock it properly. When you remove the main battery, your Pocket PC will enter the sleep mode. 4. Slide the back cover into the groove, and reinstall the back cover.
Power On and Off Power Button Sleep Mode 1. Press the “Power Button” of the Pocket PC to enter the Sleep mode. At this time, the screen is turned off and all peripheral devices enter the power-saving mode. But if the phone is turned on, it is still in the call waiting mode. 2. To turn on the screen later, just press the “Power Button.” 3. Tap , Settings, the System tab, Power and then the Advanced tab to set the device to turn off automatically after waiting for a certain time period.
Turn on the Screen This product is designed with a power-saving feature. If the screen is turned off, press the “Power Button” of the Pocket PC to turn it on. If the screen is too dark and you cannot see clearly, set the proper brightness level for the backlight. Tap , Settings, the System tab, Backlight and then the Backlight Level tab. Using the Stylus to Touch the Screen Your Pocket PC is designed for graphics-based operation.
Restarting the Pocket PC Appropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen. For your consideration, factoring into your safety and convenience, please refer to the following instructions in order: 1. Reset Press the “Reset Button” of Pocket PC with the tip of the stylus. 2. Default Settings If the touch screen is functional, please tap procedures Programs, Utilities, and then Default Settings. 3.
Reset VReset method: Press the “Reset Button” of Pocket PC with the tip of the stylus. VAppropriate situation: If the Pocket PC is unable to maintain normal operation, has no response, or if the screen is frozen. VResult: In a moment, when Pocket PC automatically completes the system startup process, the last display will be the Today screen. This will retain the Microsoft Windows, factory pre-installed applications, user’s input data, newly installed programs, and user custom settings.
Default Settings Tap , Programs, Utilities, and then Default Settings. 1. If this application is inadvertently accessed, please select the to the upper right of the screen to exit, the system will not be affected. 2. If you are certain that you wish to perform this action, please select the data input block on the right, and enter the authorized code in the block to the left. Then tap the OK button.
Clean Boot VCold boot method: Hold the “Power Button” of the Pocket PC with one hand while holding the stylus tip to push in the “Reset Button” with the other. Simultaneously release both the “Power Button” and “Reset Button”. VAppropriate situation: If a previous reset has already been attempted and the Pocket PC is still unable to maintain normal operations, has no response, or if the screen is frozen.
Perform cold boot and hold the End Button . Please refer to the following instructions before careful consideration. ÁErase all data and load default? The default is “No.” If Yes or No was not selected, after a few seconds the system will automatically execute the default No. If you long press Left Soft-Key for a few seconds to select “Yes,” then the system will erase all data and load default. After your Pocket PC restarts, follow the instructions on the screen to complete. Caution! 1.
1-16
2 Using the Pocket PC / Start Screen Tap , Settings, the System tab, and then Screen. The first time you use or cold boot the pocket PC, the system will ask you to align the screen. Kindly continue to tap the center of each cross (+) that appears and follow the screen instructions to complete the operation. If you feel that the position is not quite accurate while tapping on the screen, you follow the help for this section to align the screen again.
The following steps will bring you into the touch screen calibration mode. These steps provide a faster and more efficacious way to enter the touch screen calibration mode. And they also provide a method of getting into Screen program for when the touch screen dislocation is so severe that you completely cannot select or do anything using the stylus. 1. Simultaneously press the Left Soft-Key on the bottom-left of the Pocket PC and the execution button in the center of the navigation pad. 2.
Today Screen When you turn on your Pocket PC for the first time each day (or after 4 hours of inactivity), you will see the “Today screen”. You can also display it by tapping and then Today. On the “Today screen”, you can see at a glance the important information for the day. n o pq r n s Start. Tap to switch to a program. You can press Start hot key to replace tapping t . oTap to enable or disable the GPRS connection feature. p Antenna icon. Tap to turn the phone on or off.
The following table lists the icons that you may see on the Navigation Bar or the Command Bar. Kindly refer to the “Meaning” column for explanation or tap on the icon to access the instant message.
Meaning Icon (Located on the Navigation Bar at the top of the screen) Radio connected No signal. No service. The device has not yet connected to a network. Lost signal. The device is searching for a signal.
Icon Meaning (Located on the Command Bar at the bottom of the screen) General Mode. Set the scenario suitable for each environment. Meeting Mode. Set the scenario suitable for each environment. Outdoor Mode. Set the scenario suitable for each environment. Silent Mode. Set the scenario suitable for each environment.
Programs Download Programs For effective use of memory, the programs marked with an asterisk “*”, are posted on our website: http://www.glofiish.com for downloading. Refer to further instructions for use after downloading these programs. You can switch from one program to another by selecting it from the menu. (You can customize which programs you see on this menu. For information, see “Adjusting Settings” section.) To access some programs, you’ll need to tap Icon , Programs, and then the program name.
Icon Programs Calendar Description Keep track of your appointments and create meeting requests. Contacts Keep track of your friends and colleagues. Notes Create handwritten or typed notes, drawings, and recordings. Tasks Keep track of your tasks. Messaging Send and receive e-mail messages. Internet Explorer Browse Web and WAP sites, and download new programs and files from the Internet. Windows Live MSN related programs.
System Application Programs , Settings, the Personal tab Program Description Buttons Set the hot key for Pocket PC hardware button. Input Set the details about the input method. Lock Set the access rights and password of Pocket PC. Menus Set the items displaying on the Owner Information Input owner information. Phone Set the details about the phone. Sounds & Set the volume and notification method. Start menu. Notifications Today Set the look of Today screen and display information.
, Settings, the System tab Program About Description Display the important information about the Pocket PC. Backlight Set the details about the backlight and brightness. Certificates For network identification to prevent unauthorized access. Clock & Alarms Set the time and alarms. Memory View the memory usage, and the list of running programs, etc. Microphone Set the microphone volume. Power View the power usage condition, whether or not to power off after a waiting period.
Spb Mobile Shell Spb Mobile Shell helps you smoothly to start a day-long life. On the Today screen, you just need one touch at Spb Mobile Shell. Quickly show the electric power condition, the date, the time, the weather forecast, and even easily using photo Speed Dial. 1. Touch or tap tabs to switch to other categories. 2. Tap and hold to display a pop-up menu of actions. nIf you check Auto-Hide Mode, you just need touch or tap the tabs to display the details.
4. Time Tab: Display time in three selected cities and next alarm information. 5. Weather Tab: Display weather forecast for the next four days. ÁTap and hold to display a pop-up menu of actions. 6. Photo Speed Dial Tab: Easily using Photo Speed Dial gives you the most pleasant way to dial. n nTap a not defined button to add your contact from Contacts. o oTap a defined button to call this contact. On the other hand, you can tap and hold to display a pop-up menu of actions.
Configure Your Spb Mobile Shell Tap and hold on the Spb Mobile Shell to display a pop-up menu, and then select Options to change the settings. Tap , Settings, the System tab, and then Spb Mobile Shell. nMove Up or Move Down: Tap to arrange the display order of these items in the Today screen. n Options: Some of the tabs may have customizable options. Replace: Replace the existing tabs o p from the standard listing. Add: Add a new tab. Remove: Remove the selected tab. oShow and hide the tab content.
Note: either of the following connections allows your Pocket PC to download the weather forecast data. If there is more than one connection available, the system will automatically select the best connection, in the following order: 1. Synchronization connection: Connect your Pocket PC to a PC (Desktop or Notebook). Please note that your PC must be online. 2. Wireless LAN connection. 3. GPRS connection: Roaming mode cannot update GPS data automatically. If necessary, change to manual mode.
Quick Bar Press the hot key Tap to launch QuickBar. , Programs, Utilities, and then QuickBar. You can launch programs from the Quick Bar. X600 X650 ÃTouch or tap any icon to launch a program. If you do not select, Quick Bar will quit after several seconds.
M-Desk Press the hot key Tap twice to launch M-Desk. , Programs, Utilities, and then M-Desk. You can categorize programs on the panel according to your personal preferences. Categorizing, renaming, deleting or editing the text color of program names under M-Desk will not affect the default setting of the Pocket PC. n o nTap Phone, PDA or other tabs to switch to other categories. Tap and hold the tab to display a pop-up menu that allows you to Rename, Move forward or Move back.
ÁSystem category screen nThis category already has these n programs that are automatically o selected by the system which you cannot move or delete. All relevant information is updated automatically. oIf no storage card is installed, its p n o p icon changes to gray and will be marked with a red X. pChange screen orientation. ÁCategories Setup screen nExit the Categories Setup screen. oTap Phone, PDA or other tabs to select preferred programs.
Enter Information on Your Pocket PC You have several options for entering new information: 1. Use the input panel to enter typed text, either by using the soft keyboard or other input method. 2. Write directly on the screen. 3. Draw pictures on the screen. 4. Speak into your Pocket PC microphone to record a message. 5. Use synchronization tools to synchronize or copy information from your desktop computer to your Pocket PC. For more information, see Help on your desktop computer.
To show or hide the input panel, tap the Input Panel button. Tap the arrow next to the Input Panel button to see your choices. nSelect an input method. oTap to see your choices. pInput Panel button. n o p When you use the input panel, your Pocket PC anticipates the word you are typing or writing and displays it above the input panel. When you tap the displayed word, it is inserted into your text at the insertion point. The more you use your Pocket PC, the more words it learns to anticipate.
Type with the Soft Keyboard 1. Tap the arrow next to the Input Panel button and then Keyboard. 2. On the soft keyboard that is displayed, tap the keys with your stylus. Use Letter Recognizer With Letter Recognizer you can write letters using the stylus just as you would on paper. 1. Tap the arrow next to the Input Panel button and then Letter Recognizer. 2. Write a letter in the box. When you write a letter, it is converted to typed text that appears on the screen.
Use Transcriber With Transcriber you can write anywhere on the screen using the stylus just as you would on paper. Unlike Letter Recognizer and Block Recognizer, you can write a sentence or more of information. Then, pause and let Transcriber change the written characters to typed characters. 1. Tap the arrow next to the Input Panel button and then Transcriber. 2. Write anywhere on the screen.
Write on the Screen In any program that accepts writing, such as the Notes program, and in the Notes tab in Calendar, Contacts, and Tasks, you can use your stylus to write directly on the screen. Write the way you do on paper. You can edit and format what you’ve written and convert the information to text at a later time. Write on the Screen Tap Menu and then check Draw to switch to writing mode. This action displays lines on the screen to help you write. nTap Menu and then check Draw.
Select Writing If you want to edit or format writing, you must select it first. 1. Tap and hold the stylus next to the text you want to select until the insertion point appears. 2. Without lifting, drag the stylus across the text you want to select. If you accidentally write on the screen, tap Menu, then Undo and try again. You can also select text by tapping Menu and then Draw to deselect it and then dragging the stylus across the screen.
Draw on the Screen You can draw on the screen in the same way that you write on the screen. The difference between writing and drawing on the screen is how you select items and how they can be edited. For example, selected drawings can be resized, while writing cannot. Create a Drawing Cross three ruled lines on your first stroke. A drawing box appears. Subsequent strokes in or touching the drawing box become part of the drawing. Drawings that do not cross three ruled lines will be treated as writing.
Select a Drawing If you want to edit or format a drawing, you must select it first. Tap and hold the stylus on the drawing until the selection handle appears. To select multiple drawings, tapping Menu and then Draw to deselect it and then drag to select the drawings you want. You can cut, copy, and paste selected drawings by tapping and holding the selected drawing and then tapping an editing command on the pop-up menu, or by tapping the command on the Menu menu.
Create a Recording 1. Hold your Pocket PC’s microphone near your mouth or other source of sound. 2. Press and hold the Record hardware button on your Pocket PC until you hear a beep. 3. While holding down the Record button, make your recording. 4. To stop recording, release the Record button. Two beeps will sound. The new recording appears in the note list or as an embedded icon. You can also make a recording by tapping the Record button on the Recording toolbar.
Voice Commander By default, the system sets the button on the side of the Pocket PC as the “Voice Commander Button.” Press this button Voice Commander Button to launch the Voice Commander. For details on how to use this function, please refer to the Voice Commander section.
2-28
3 Voice Command Satellite Navigation / Navigation Device Installation n o nPocket PC oCar Charger (* optional): when Pocket PC is low on power, recharge by connecting one end to the car cigarette lighter/12 volt power outlet and the other end to the socket on base of Pocket PC. Attention: The GPS signal receiver is built into the Pocket PC. If car windscreen has heat reflective metallic film, or Pocket PC is obstructed by objects, then the receptivity of the GPS will be adversely affected.
GPS Navigation Software Installation Please follow your car navigation system operating manual’s instructions on software installation in order to use the navigation function. Conditions for Using GPS Car Navigation By using this system you are agreeing to the following conditions: 1. When using this device, please use with matching car mount. Affix device securely to the car mount. Please be aware that installation in the areas depicted below is forbidden and is strictly prohibited.
2. Please set navigation destination before driving. Do not operate this system while driving. 3. Please use this system with care. If any harm results from careless use of this system, the responsibility for safe driving resides with the driver. 4. GPS positioning is limited by weather and usage location (tall buildings, tunnels, underpasses, trees, bridges). Most GPS do not work indoors, nor can GPS signals penetrate buildings, car sun shades and heat reflective film with metallic content.
Satellite Data Update (Not supported in USA) Tap , Programs, GPS, and then Satellite Data Update. Login to the provider’s server to download instant satellite data and enable the GPS function. Note: either of the following connections allows your Pocket PC to download the latest GPS data. If there is more than one connection available, the system will automatically select the best connection, in the following order: 1. Synchronization connection: Connect your Pocket PC to a PC (Desktop or Notebook).
ÁTap the Download Button to update the GPS data manually. The figure on the left shows how to download using the synchronization connection. ÁTap the Setting Button in the Satellite Data Update main screen to open the dialog in the left figure. n o nCheck the expiration checkbox to activate the reminder function on the due date. oThe default value is checked. The system will automatically update the data when online.
ÁWhen the GPS data has expired, n the relevant message displays on the top of the screen. nThe icon reminds you that your GPS data has expired. o oTap the Notification Button to open the message window. p 3-6 pTap to close the message window.
Location SMS Tap , Programs, GPS, and then Location SMS. You can utilize the GPS function offered by your Pocket PC, to send the matching location automatically found by this program and the necessary message to your contacts. This could be helpful in preventing kidnapping, reporting disastrous situations, calling for help in emergencies or locating an individual. In addition, we have formulated many SMS templates based on different situations for your convenience. n o p [ \ 1.
2. Select in the main screen, once in the screen shown on the left, tap on any message and tap OK Button to select. Further, by pressing and holding anywhere on the screen, together with the pop-up menu, you can add, edit or delete your most used messages. 3. The content of the message that your recipient views looks similar to what is shown on the left. Actual messages differ depending on the recipient’s device.
GPS Viewer Tap , Programs, GPS, and then GPS Viewer. You may use this Pocket PC to automatically search the GPS coordinates of your location and check if the GPS functions work properly. n o p [ n o p q 1. Run this program in a location with good signal reception. nGreenwich Mean Time (GMT): After connecting to a satellite and obtaining the GMT, it will be displayed on the screen. Tap to set the satellite time as the system time. oReport GPS tracking information. pTap to change the unit.
3-10
4 Using the Phone / The Phone feature on the Pocket PC allows you to perform the following tasks: VMake and receive calls. VQuickly make calls or listen to voice mail without entering phone numbers using Contacts, Speed Dial, or your Call Log. VCheck the Call Log to see who has called, whom you have called, add a new number to Contacts, and access notes taken while you were on a call. VReceive calls and easily take notes during the call. VSend SMS messages. VCustomize how your phone rings.
Installing and Removing the SIM Card 1. Tap the ALL OFF Button in Wireless Manager to turn off your Pocket PC’s mobile phone, Bluetooth, and wireless LAN functions. 2. Press the “Power Button” of the Pocket PC to turn off the screen. 3. Installing the SIM Card 4. Removing the SIM Card Push left edge of the SIM card with your stylus tip. After the SIM card is pushed from the holder, take out the SIM card using your fingers. 5.
Using the Phone n p o q nMicrophone oEarphone pPhone Receiver qPhone Speaker (Bottom of Pocket PC) Combination Operation Method Hold the Hold the Pocket Pocket PC PC and position manually the receiver for calls close to your ear and the speaker close to your lips. Install the Place the external earphone in headset your ear and position the microphone to your lips. Answer or End a Call Press Send Button or End Button on the lower part of the Pocket PC.
Adjusting the Phone Volume on the top and adjust all Tap programs’ sound functions under . Adjust the phone sound volume under . 1. When there is no call, you can push the volume control key on the side of the Pocket PC or use the stylus to tap the speaker icon Tap and then to adjust the ring volume of the incoming call. 2. Push the volume control key on the side of the Pocket PC or tap and then to adjust the phone volume. You can only do this during a call. on the top changes to . 3.
Turning the Phone On or Off and Making Calls n nAdjust earphone volume oRear side: The SIM card is located o p q below the battery. p q Send Button End Button 1. Turn on the phone nOn the Today screen, tap to launch Wireless Manager. oOr tap the icon. When the message window appears, tap “Wireless Manager.
to enable GSM. pTap qInput the PIN and wait for the phone to turn on. r changes to And the 2. Dial: Press . icon changes to to enter the Phone screen. Use the stylus to tap the telephone number and then tap the Talk Button. 3. Answer a call: Press 4. End a call: Press . . 5. Turn off the phone nOn the Today screen, tap to disable GSM. oTap 4-6 to launch Wireless Manager. .
Toolbar nSmart Dialing: Enter the portion n o p q you remember and the system will use the fuzzy comparison method to list the matching contacts at area o on the figure. Please refer to the keyboard shown on the screen to enter information including the phone number and letters. oTap a contact to view contents. pProvides the relevant menu. For example, select Options to change the phone setup such as ring tone, vibration mode, PIN code, etc. Or select Send Text Message to send SMS message.
The following table shows the icons that you may see on the Navigation Bar on the top of the screen. Signal Indicator Description SIM card unavailable. The phone is turned off. To turn it on, tap this icon. Network is searching or unavailable. Phone connection unavailable or network error. To turn it off, tap this icon. The phone is turned on and signal reception is normal. To turn it off, tap this icon. Active call. To switch back from other programs, tap this icon.
Call from Contacts Phone numbers entered in Contacts can be used to quickly locate phone numbers and make calls. 1. In the contact list, tap and hold the contact to display a pop-up menu. 2. Tap Call Mobile or Call Work on the pop-up menu. 3. Tap a contact to display the details.
Call from Speed Dial On the Phone screen, tap Speed Dial Button to enter the following screen. nTap and hold on a certain contact. The pop-up menu provides the n Delete and Edit options for phone setup. o oTap to redial this number. Remember that this code (for example, “2”) you want to dial can also be dialed from the number p area in the Phone screen by tapping on “2”. pTap Menu and then New to show the Contacts list. Tapping a Contacts name and number will add it to the Speed Dial list.
Call from the Call History Tap Call History Button on the Phone screen to enter the following screen. n o p q nTap Menu and then Filter to list the categories. To search, tap By Caller and follow the screen instructions to complete the operation. Tap this icon to redial this number o immediately. pTap and hold the phone number area and tap the option you need on the pop-up menu. For example, tap Call to redial this number, tap Save to Contacts to add this number to the Phonebook.
Customize Your Phone Tap Menu, Options, and then the Phone, Services, Network, Skin, Appreciation software or Others tabs to modify the relevant service setup. Note that the setup values you can change here depend on the services provided by your telephone company. Tap the Appreciation software tab. nMake sure that you have checked “SMS Zoom.” When you receive an SMS, a large mail icon will appear on the upper right of the Today screen, and you can open your newly received message by tapping on this icon.
Tap Menu, Options, and then the Phone tab. nYou can set the ring type as ring, n o p q vibration or mute. If o you want to use a customized ring tone file, use the synchronization program on your desktop computer to copy the .wav ring tone file to the /Windows/Rings folder on the Pocket PC. You can then select this ring tone from the Ring tone list. Set p the key sound for dialing. qYou can set a PIN (Personal Identity Number) to block unauthorized access to your phone.
Phone Application Programs Caution! Before you can use the functions described in the Phone Group. Make sure that the SIM card is properly installed in your Pocket PC and the Phone is already turned on. SIM Manager If your Pocket PC does not include this function, it means it is not supported and you can skip this chapter. Tap , Programs, Phone, and then SIM Manager. Standard Display SIM Manager manages the SIM Phonebook and duplicates the Phonebook entries. n o p q r s ^ nSIM Phonebook oName or Pos.
The following are the shared functions for standard screen or full screen display: sMenu Button: Provides the appropriate function table. SMS Management: Enter the SMS management screen. New SIM Contact: Add a new phonebook entry to the SIM card. Refresh: Tap to refresh the displayed contacts and SIM card information, after the Contacts are updated. tStandard Button: Provides Standard, SIM, Contacts three switching modes.
Copy Phonebook Information The function descriptions of this section are for standard screen and fullscreen display. Copying phonebook information between the SIM card and Contacts is either by “select one, select multiple, or select all” methods. For precise management of your phonebook that can be conveniently performed. nTap on the □ in the title to select Select all n all. oTap on the □ in front of a phonebook data entry to select this singl entry.
SMS Management Tap Menu and then SMS Management to enter the SMS management screen and to display the original SMS contents on the SIM card. nDouble tap the number in the Pos. column to view the corresponding SMS contents. n oTap the SMS you want to delete. When it is highlighted, tap Del selected SMS Button to delete this message from the SIM card. o pReturn to the SIM Manager p screen. SIM Tool Kit Tap , Programs, and then SimTKUI (SIM Tool Kit). ÁThis screen is for reference only.
SMS Sender Tap , Programs, Phone, and then SMS Sender. Tap , Messaging, and then New. Press to bring up the Phone screen. Tap Menu and then Send Text Message. Enter the composing SMS screen in Messaging. n“Text Messages” means you are n editing SMS. o p oInput the mobile phone number. pInput the messages you want to send. q qTap Menu and then My Text to select canned messages or to edit your Text Messages. rTap to send SMS message.
Speed Dial Tap , Programs, Phone, and then Speed Dial. Hot Key Switch nTap the box according to the functions provided by the system. n oTap to switch between these functions: Frequency Dial → Index Dial. pTools Button: Provides the relevant o p menu. For example, select Settings to set the interface as Frequency Dial or Index Dial. Select Sound on/off to set the sound for tapping the screen. n o p q ÁTap Tools and then Color and Text to enter the Setting screen shown on the left.
Frequently Dialed Screen ÁFrequency Dial screen n nTap any phone entry box to speed dial. o oTap and hold the box, then select p appropriate command from the pop-up menu. q pSort according to the number of calls in descending order. The r upper left corner has the most number of calls while the lower right corner has the least number. q § ¨: Tap to view the previous or next page. rTap to switch to the Frequency Dial screen as shown on the left.
Index Dial n ÁIndex Dial screen o nSwitch to the Index Dial screen as shown on the left. oTap on any letters. The content displayed are the data created in Contacts. If you did not create any data in Contacts, the screen is blank. n nThe letter “F” appears on the upper left side of the screen (see left). This indicates that this page o contains all address data that starts with “F”. The English Address Book is arranged alphabetically using the First Name. p oTap any box to speed dial.
Call Filter * Download Programs For effective use of memory, the programs marked with an asterisk “*”, are posted on our website: http://www.glofiish.com for downloading. Refer to further instructions for use after downloading these programs. Tap , Programs, Phone, and then Call Filter. n o nTap Options and then New to add a new Block List. oTap and hold an entry in the list. Select from the pop-up menu to manage the list according to your p needs. pTap Options and then New to add a new Allow List.
ÁTap Options and then New to enter the screen shown on the left. n o nInput name and telephone number. oAdd to Tel List or SMS List. pOK Button qCancel Button Tap and hold a contact in the p Contacts screen. Select Add to q Call Filter from the pop-up menu to add a new entry to the Block List. ÁTap Options and then Other Config.. nBlock Record Settings tab: Select keeping time. n oSynchronize tab: Activate o synchronization.
Tap the icon or on the lower right of the Today screen to display the Call Filter Status window. ÁDisplay Call Filter setting status. nTap to hide the Call Filter Status window.
5 Customize Your Pocket PC / You can adjust the Pocket PC settings according to your personal preferences and install other programs. Adjusting Settings To see available options, tap , Settings, then the Personal or System tab located at the bottom of the screen. The following utilities allow you to adjust the settings based on your personal work style.
Notifications Your Pocket PC reminds you in a variety of ways when you have something to do. For example, if you’ve set up an appointment in Calendar, a task with a due date in Tasks, or an alarm in Clock & Alarms, you’ll be notified in any of the following ways: VA message box appears on the screen. VA sound, which you can specify, is played. VA light flashes on your Pocket PC. VThe Pocket PC vibrates. To choose reminder types and sounds for your Pocket PC, tap and then Settings.
Power Preference Settings Tap , Settings, the System tab, and then Power. View the power usage condition or perform the relevant power management settings. nPower icon Check this item, so that when you n o accidentally press the hardware buttons on the Pocket PC, the Pocket PC will not exit the sleep o p q mode. This will prevent unnecessary power consumption if a button is being pressed accidentally and not being discovered in time.
Backlight Tap , Settings, the System tab, and then Backlight. 1. Battery Power or External Power tab: Set the relevant backlight functions. 2. Backlight Level tab: Adjust the backlight level.
Microphone Profile Microphone * Voice Turn the volume down and find Surrounding Commander the proper volume setting for interference recorded voice control better recognition of system. when volume up. Turn the volume up. More distance from the Speech Cause recording lecturer more interference recorded. * Used for the version built in “Voice Commander.” Tap , Settings, the System tab, and then Microphone. 1. Use the slider to adjust volume of the recording mic. 2.
Adjust Volume Push the volume control key on the side of the Pocket PC. Or use the stylus to tap the functions under icon on the top of the screen to adjust all program sound . Adjust the phone volume under . 1. Adjust volume: When set to On, use the stylus to tap and drag the slider up and down to adjust the volume. You can also push + or on the side of the Pocket PC. 2. Vibrate: Under Vibrate mode, the sound function of all programs will be replaced by vibration, including incoming call rings.
Scenarios Tap , Programs, Phone, and then Scenarios. ÁYou can tap any Scenarios icon in the Today n screen to enter Scenarios. After selecting a mode, this will become o the Scenarios icon you selected. nCheck this item to activate Scenarios. p q oSelect an applicable mode. pCheck this item to display the Scenarios mode icon in the Today screen. qDetails Button: Set the relevant options for this mode, such as volume, backlight, etc. ÁTap Details Button to enter the screen shown on the left.
Task Manager On the Today screen, tap Task Manager. Stop programs you are not currently using to free memory on your Pocket PC. ÁAdvanced mode. n o p q r s t nQuit from Task Manager. oStop the program you selected. pTap to activate the selected program. qDisplay with Wizard mode or Advanced mode. rStop all programs. sPage up or page down. Task Manager on the tTap Today screen. ÁWizard mode. nTap to activate the selected program. n o p q 5-8 oDisplay with Wizard mode or Advanced mode.
Find and Organize Information The Search feature on your Pocket PC helps you quickly locate information. 1. Tap , Programs, and then Search. Input the text you want to find and then select the data type. Tap on Search to start the search. 2. To find information that occupies a larger space, select Larger than 64 KB for Type. Actually, you can use File Explorer to search for files and place these files into folders systematically. Just tap Explorer. n , Programs, and then File nTap to change folders.
Navigation Bar and Command Bar The navigation bar is located at the top of the screen. It displays the active program and current time, and allows you to switch to programs and close screens. Use the command bar at the bottom of the screen to perform tasks in programs. The command bar includes menu names, buttons, and the Input Panel button. To create a new item in the current program, tap New. To see the name of a button, tap and hold the stylus on the button.
Pop-up menus With pop-up menus, you can quickly choose an action for an item. For example, you can use the pop-up menu in the contact list to quickly delete a contact, make a copy of a contact, or send an e-mail message to a contact. The actions in the pop-up menus vary from program to program. To access a pop-up menu, tap and hold the stylus on the item name that you want to perform the action on. When the menu appears, lift the stylus, and tap the action you want to perform.
Redefine Hot Keys Tap , Settings, the Personal tab, and then Buttons. n o p q These hot keys can be redefined as launch keys for frequently used programs. V End Button and Send Button are exclusive phone functions so they cannot be redefined.
6 Synchronization / Windows Vista Part A PC with Windows Vista™ operating system can be used to enable connection and synchronize with your Pocket PC. The Windows Mobile® Device Center application can be used to manage your Pocket PC, and can provide Pocket PC access to other resources through the connected PC. The online services and application access can also keep the Pocket PC up-to-date with the connected PC.
1. Software installation: You could use the Getting Started CD to install Windows Mobile® Device Center on the personal computer. 2. Hardware installation: The USB cable is a plug-and-play device. Use the USB cable to connect your Pocket PC to your personal computer. USB Port ® 3. Using Windows Mobile Device Center nAfter installation is complete, the Setup Wizard helps you customize your synchronization settings.
Windows XP/2000/98 Part A PC with Windows XP/2000/98 operating system can be used to enable connection and synchronize with your Pocket PC. Using Microsoft® ActiveSync®, you can synchronize the information on your desktop computer with the information on your device. Synchronization compares the data on your device with your desktop computer and updates both computers with the most recent information.
Installing and Using ActiveSync Important Installation Notice Before you install ActiveSync, make sure that the USB cable on the Pocket PC is not connected to the personal computer. Connect the USB cable only after ActiveSync is installed. 1. Installing ActiveSync: You could use the Getting Started CD to install Microsoft ActiveSync version 4.5 or above on the personal computer. ActiveSync is already installed on your Pocket PC. 2. Hardware installation: The USB cable is a plug-and-play device.
3. Using ActiveSync nAfter installation is complete, the ActiveSync Setup Wizard helps you customize your synchronization settings. oOnce you use the USB cable to connect the two devices properly, the Set Up a Partnership screen appears on the personal computer. Set it up according to your requirements. The green icon appears on the status bar of your personal computer to indicate that it is Connected. pClick Explore on the Microsoft ActiveSync on the personal computer to access files in the Pocket PC.
FAQ About Synchronization Tap , Settings, the Connections tab, and then USB to PC. 1. Factory setting defaults to checking the box. 2. If you have followed the above installation and operation procedures and find that the connection between your Pocket PC and desktop PC still cannot be established, please uncheck the box shown on the left. USB Synchronization Before you start to synchronize, use the Pocket PC Getting Started CD to install synchronization tools on your personal computer.
ActiveSync synchronization settings: 1. After installation is complete, the Setup Wizard will continue to guide you. Adjust the specifications according to your actual needs. 2. Use the USB cable to connect the two devices properly and the Set Up a Partnership screen appears on the personal computer. Set it up according to your requirements. nClick OK. oClick Next. pCheck the items you want to synchronize. qClick Next.
rClick Finish. sAfter installation is complete, the ActiveSync Setup Wizard helps you connect your Pocket PC to your desktop computer, set up a partnership so you can synchronize information between your Pocket PC and your desktop computer, and customize your synchronization settings. Your first synchronization process will automatically begin when you finish using the wizard. tThe green icon appears on the status bar of the personal computer to indicate that it is Connected.
Synchronization Tool on Pocket PC Once you have set up ActiveSync and completed the first synchronization process, you can initiate synchronization from your Pocket PC. To switch to ActiveSync on your Pocket PC, tap , and then tap ActiveSync. For more information on how to use ActiveSync on your personal computer, run ActiveSync and refer to the ActiveSync online help. To learn more about the Pocket PC ActiveSync, switch to ActiveSync and tap and then Help. Just refer to the Help for more information.
Synchronizing using Bluetooth Without using the USB cable to connect the two devices, you can still synchronize using Bluetooth. The greatest advantage is that you don’t have to plug in and detach from the USB cable so often. This is especially useful for managing several Pocket PCs. For details on Bluetooth devices, refer to “Using Bluetooth” section.
7 Connections / Connecting to the Internet This section teaches you how to use GPRS wireless network connection. GPRS wireless networking is a convenient function for working at home or while traveling. You can use the Pocket PC to browse websites and read or send E-mails, SMS or MSN messages. Make sure that your telecom company provides this service and apply for a SIM with GPRS function. If you already have a SIM card, all you need to do is apply for the GPRS function from your service provider.
Tap , Settings, the Connections tab, and then Connection Wizard. 1. Select the country name from the list. 2. Select the carrier name from the list. 3. According to actual requirements, select the carrier name, and then tap Add Button or Edit Button. Or use the New Button to add the new network connection. 4. Search Button: Detect the currently available telecommunication service. If it is found, use the Add Button to add the highlighted selection.
Setting the GPRS Connection Tap , Settings, the Connections tab, Connections, and then the Tasks tab. 1. As shown in the screen on the left tap “Add a new modem connection.” 2. Enter the “Make New Connection” screen as shown in the screen on the left. nInput a new connection name for convenience in making connections in the future. oSelect “Cellular Line (GPRS).” pLastly tap Next.
3. Input the Access Point Name provided by your telecom company and tap Next. 4. Input your personal information such as account number, and tap Finish.
Starting GPRS Connection 1. Turn on Phone: Tap or icon at the top of the screen and tap and “Wireless Manager.” Tap input your PIN to enable GSM. The icon will change to the 2. Tap icon changes to while . , then tap Settings to link to Connections. You are ready to connect GPRS. 3. Connect GPRS: Select “Manage existing connections” in Connections. Tap and hold on the newly created connection name, and then select Connect to finish GPRS connection. 4.
Disconnecting GPRS 1. Disconnect GPRS: Tap and the message window appears. Tap Disconnect. 2. Turn off Phone: Tap “Wireless Manager.” Tap disable GSM.
Using Bluetooth Bluetooth is a short-distance wireless communication technology with an effective range under 10 meters (30 feet). When you enable Bluetooth function, the blue LED blinks once every 4 seconds. Bluetooth LED indicator (Blue) to launch 1.Tap Wireless Manager. to enable 2.Tap Bluetooth. Bluetooth Connection Wizard Tap , Programs, Utilities, and then Bluetooth Manager.
ÁAll nearby Bluetooth devices found by the system. n nTap on any one of the shortcut icons and you will be able to follow the on-screen instructions to pair with that particular device. Devices that have already been paired with o p are shown with a 9 . oTap on one of the icons which q represent a Bluetooth headset, when a 9 is shown, it means that you may use that particular Bluetooth headset. pRefresh Search Button: re-scan for all nearby Bluetooth devices. qChange viewing method.
Bluetooth Connection Setting Tap Settings Button in the Bluetooth Wizard screen to display the Bluetooth Settings screen. Tap the General tab 1. Bluetooth Status nTap Open to enable Bluetooth function. oTap Close to disable Bluetooth function. Make sure that you disable Bluetooth function when you need to save power or if you are in locations such as an airplane or hospital that ban the use of wireless devices. 2.
Service Tap the Service tab Provide the settings about services of serial port, file transport and exchange vCard.
Serial Port If you have Bluetooth GPS software, use the product as instructed and refer to the accompanied documentation and this section to register your Pocket PC as an effective serial port or search for other serial ports. Tap the Serial Port tab Register new serial port 1. Tap Add to enter the Settings screen. If you no longer need to use a registered serial port, tap this serial port under the “Name” column to highlight and then tap Delete to delete it. 2.
Bluetooth Headset Tap the Bluetooth Headset tab 1. Select a headset from the paired list. 2. Check “Use Headset.” FTP Sharing Tap the FTP tab Specify one of the folders on your Pocket PC as a shared directory.
CSD Type Tap , Settings, the Connections tab, and then CSD Type. You must first apply for Circuit-Switched Data (CSD) service from your telecom company before you can use this function. In short, this function is similar to the modem dial-up in a personal computer. By simulating the Pocket PC as a modem and connecting through the built-in GSM device, you can use the Pocket PC to access the web. ÁThis figure is for reference only.
Connecting with a Personal Computer For more information, refer to “Synchronization” section. Wireless LAN Transmission On the Today screen, tap to launch Wireless Manager. For more information, refer to “Using Wireless LAN” section.
8 Using Wireless LAN / Connecting to Wireless LAN This section teaches you how to use the Pocket PC’s built-in wireless LAN function to connect to the Internet. It is convenient for you to browse websites and send/receive E-mails through wireless networks at certain locations where wireless networking services are provided.
On the Today screen, tap Tap to launch Wireless Manager. , Programs and then Wireless Manager. n nThis icon will show up on your screen whenever your Pocket PC has detected a usable wireless network and has connected to that network, indicating that your o p Pocket PC has successfully connected to the network hotspot (Access Point). At this point, the indicator on the upper left of your Pocket PC will flash amber. oTap to enter the setup screen.
Configure Your Wireless Network WLAN Setup Scenarios Location Home Office Select Networks Proxy Connection , Settings, the 1. Close Proxy connection Connections tab, Connections, the 2. Not required to set Proxy Advanced tab, Select Networks Button, and then select My Work Network from “Programs that automatically connect to the Internet should connect using:” menu Refer to the above and set as My Work Network Network key or Access Point 1. Authentication: Select Open 2.
Configure Your Wireless Network (Reference for a normal network setup) You will need a correct IP address, DNS name server address, Proxy server, and connection port number to setup your connection. If you have purchased a wireless Internet service account, then the service desk at the location where you will be connecting will provide you with this information, or, you should obtain this information from the network administrator of your company.
4. As shown on the left, make sure that My Work Network is selected for both items, and finally tap to save and exit. My Work Network is the WLAN connection method. As this option is from a choice of two, the next time you need to use the GPRS connection, you will have to refer to the above listed steps, select My ISP for the first item. 5. In the Wireless Manager main menu, select to enter the WLAN Utility screen. 6. Then select the Configure Button to enter the WLAN setup screen.
7. Select name of a currently available network to enter the WLAN authorization setup screen. 8. Set accordingly to the rules and information provided by the hotspot location. nAuthentication: Select Open oData Encryption: Select WEP to enable the entry bar about Network key pNetwork key qNetwork index 9. Tap and hold on the name of the network connection that you can currently use, then select Connect.
Configure Your Wireless Network (Reference for Proxy setup) To successfully configure your network, you will need the following information: a correct IP address, DNS name server address, Proxy server, and connection port number, etc. Please obtain the above listed information from your company’s network administrator. If your company’s networking environment doesn’t need Proxy server settings, please close the proxy connection. Tap , Settings, the Connections tab, Connections, and then the Tasks tab.
The above is applicable to an office environment that requires a Proxy setup. For others that close the proxy connection, please do not check the box named “This network connects to the Internet” and skip the following procedures. 3. Enter the name into the “Proxy server” field. 4. Select the Advanced button and enter the advanced settings screen. 5. You can modify the settings by tapping the HTTP type. 6. Enter the number into the “Port” field. Finally, tap exit.
9 Sending and Receiving Messages / Tap and then Messaging. X nTap to select an account. oTap to setup a new E-mail account. pTap to select the highlighted account above. qChange the account settings. Or delete a message. Y Z [ X ÁFunctions of the Messaging screen: Y nSelect the service and folder you Z want to display. [ oSelect the sort order for messages. pTap to open a message. qTap and hold to display a pop-up menu of actions. rProvides the relevant menu.
E-mails and SMS Messages Refer to “Connecting to the Internet” section to learn how to connect the Pocket PC to the Internet and start using Messaging to send and receive E-mails and SMS messages. This section explains the basic preparations and processing principles. If you have any questions, refer to online help about Pocket PC or synchronization. Use Messaging to send and receive E-mails messages in either of these ways: 1.
Synchronizing E-mail Messages If you want to synchronize e-mails with company or home usage, please refer to this section. E-mail messages can be synchronized as part of the general synchronization process. You will need to enable Inbox synchronization in synchronization tools. For information on enabling Inbox synchronization, see Help on the desktop computer. During synchronization: 1. Refer to “Connecting to the Internet” section.
Connecting Directly to the Mail Server For single-machine use, not combining office and home E-mails, please refer to “E-mail Server Setup” section. You will receive messages directly from the mail server. This is irrelevant to personal computer use. You can work online or offline. When working online, you read and respond to messages while connected to the e-mail server. Messages are sent as soon as you tap Send, which saves space on your Pocket PC.
E-mail Server Setup Refer to this section if you are preparing for single-machine use and not combining office and home E-mails. If you already have an E-mail account from your ISP or company network, you can use Messaging to send and receive mails and messages. To establish a new Messaging E-mail server on your Pocket PC, refer to the following sections. 1. Obtain the following information from your ISP or company’s network administrator for convenience in setting up the E-mail service.
3. Select “Other” for the e-mail source. 4. Select “Other (POP/IMAP)” for the e-mail provider. 5. Follow the instructions on the screens to setup the E-mail account. 6. Refer to “Connecting to the Internet” section or “Using Wireless LAN” section to connect the Pocket PC to the Internet and you can start sending and receiving E-mails and SMS messages. 7. Connecting to the E-mail server nTap Messaging, Menu, Go To, and then check “Other (POP/IMAP)”. oTap Menu and then Send/Receive.
Using E-mails and SMS Below is a brief description of the Messaging screen functions: n o p q nSelect the service and folder you want to display. oSelect the sort order for messages. pTap to open a message. qTap and hold to display a pop-up menu of actions. r s t rStatus bar sTap to change the account settings. tTap to delete a message.
Brief description on writing, sending, reading and replying (to) mail: 1. Send and Receive Mail: Tap Menu and then New to compose a message and then tap Send to send it. o n p n q r s nTap To, Cc or Bcc to open the Contacts screen. As long as you have set up Contacts beforehand, you can just tap to select. oTap the data area to input the E-mail adress, mobile phone number and subject directly. If there is more than one contact, use a semi-colon (;) to separate the addressees.
2. Read and Reply: Receive new mails by tapping Menu and then Send/Receive. Switch to the “Inbox” folder and tap to open. The following figure shows the open mail screen. ÂBesides reading the messages, provide frequently-used functions for replying to or forwarding. 3. Change preference settings. nSet the Inbox Synchronization option in synchronization tools. oTap Messaging, Menu, Tools, Options, and then the Accounts, Message … tabs on the Pocket PC to set the appropriate options.
Direct Push Technology Alert The Direct Push Technology alert function will enable you as a corporate user to never miss another e-mail, using the Pocket PC for the best business service. Through the synchronization feature, your Pocket PC can instantly and automatically receive important e-mails from Microsoft Exchange Server.
2. Obtain the server address, user name, network etc. from the company network administrator to successfully setup the server data. 3. Tap Menu and then Schedule. The Peak times and Off-peak times provide a As items arrive option, this is the direct push technology alert function.
Windows Live™ Messenger To switch to Windows Live™ Messenger, tap , Programs, and then tap Windows Live™ Messenger. Windows Live™ Messenger on your Pocket PC is an instant messaging program that lets you: VSee who is online. VSend and receive instant messages. VHave instant message conversations with groups of contacts. For more information on using Windows Live™ Messenger, tap and then Help.
Setting Up The first time you use: Tap , Programs, and then Windows Live™ Messenger. On the Today screen, tap Messenger to display the Windows Live™ Messenger sign-in screen. Before you can connect, you must enter Passport or Exchange account information. 1. Tap Messenger on the Today screen. 2. Tap Sign in.
Working with Contacts If you already use Windows Live™ Messenger on your desktop computer, your contacts will show up on your Pocket PC without being added again. The Windows Live™ Messenger window shows all of your messenger contacts at a glance, divided into Online and Offline categories, or sorted by groups. From this view, while connected, you can chat, send an e-mail, block the contact from chatting with you, or delete contacts from your list using the pop-up menu. nTap a contact to start a chat.
Chatting with Contacts Tap a contact name to open a chat window. n nView full chat. oEnter your message in the text entry area, and tap Send. pReturn to the contacts list, and o select a contact to chat with. p qThe contact you are chatting with. q \Provides the relevant menu. For example, to invite another \ contact to a multi-user chat, select Options and then Add participant, and tap the contact you want to invite.
MMS Message Tap , Messaging, and then MMS. Tap , Programs, Phone, and then MMS Message. The MMS Message mailbox is very similar to ordinary E-mail mailbox function. “Inbox” saves the MMS that you received while “Outbox” saves the MMS that you are going to send. “Sent” saves a backup copy of the MMS sent successfully. “Drafts” saves incompletely edited MMS messages. Create and Edit MMS How to compose a new MMS message: 1. Tap MMS.
n o p 2. Tap Menu and then New to add a new MMS. nTap to change the MMS sort method. oSelect the folder types you want to display in the list. pTap to manage your MMS mailbox. q qProvides the relevant menu. 3. The MMS template displays. You n can edit freely. o nTap To button to select a phone number or E-mail address from p your Contacts. You can tap the entry area to input the phone number or E-mail address also. q oTap to input the subject.
Birthday Reminder * Download Programs For effective use of memory, the programs marked with an asterisk “*”, are posted on our website: http://www.glofiish.com for downloading. Refer to further instructions for use after downloading these programs. Tap , Programs, Utilities, and then Birthday Reminder. Combines Contacts and this application, you may store birthdays and anniversary dates in the Contacts card first.
2. For adding a new contact, you may n tap New on the main screen. nUse the scroll bar to scroll the pages. oFind the Birthday or Anniversary o field and enter the data. 3. For setting the corresponding n o features, you may tap Settings on the main screen. nTap the check box to display a popup message for reminding. oThe options of reminding methods. Remind you once: at 8:00 A.M. Remind you two times: at 8:00 p A.M. and noon. Remind you three times: at 8:00 A.M., noon and 6:00 P.M.
4. When the reminding date you set comes, the Pocket PC phone will popup a message on the screen to remind you. 5. Tap the icon on the top of screen and tap Preview to enter the birthday or anniversary reminder settings screen. 6. Moreover, you may tap the , or , icons on the calendar of main screen. n nYou may send a SMS, MMS, make a phone call or send an email to him/her after selected corresponding icons. o p oShow you that you ever sent greeting messages to this contact.
10 Multimedia / Using Camera Shooting Tips To take a self-portrait, it is best to face into the light. For best photo results, avoid backlit or dark areas. X600 Part Press the Tap button on the Pocket PC. , Programs, Multimedia, and then Camera. 1. To take photos of scenery or of other people, turn the Pocket PC so the screen is facing you and when you are satisfied with the composition, press the button on the side of the Pocket PC. 2.
X650 Part Press the Tap button on the Pocket PC. , Programs, Multimedia, and then Camera. 1. To take pictures of scenery or of other people, turn the Pocket PC so the screen is facing you. 2. Press half the button to activate auto focus. When you hear beeps and the focus frame becomes green from red, press the same button to take a picture. 3. To take a picture of yourself, turn the Pocket PC around so that the preview mirror is facing you and press the button.
Camera Mode You can use Camera to shoot pictures and videos. This section describes the Camera tools.
Icon Meaning Photo mode: Normal, Timer, Continuous shutter, Portrait Activate “Timer” to select the fixed time for shooting a picture Activate “Continuous shutter” to select the number of pictures to be taken Choose landscape or portrait Enable or disable the flash function (X650 only) Display or hide the date Select file format Select resolution. The higher the resolution, the larger the picture files.
Camera Mode Using Wizard Tap or to select Wizard. After you press the shutter button on the side of the Pocket PC, the Wizard will guide you through how to link to other programs conveniently. This section explains the Wizard tools. n nExit Camera oPhoto-viewing area, retains the last photo just taken pWizard toolbar o If “Continuous Shutter” is selected, it will directly open or use the last picture just taken when linking to p Icon other programs.
Managing Pictures Shot by Continuous Shutter Tap to select “Continuous shutter” in the wizard mode. After you press the shutter button, you can preview all thumbnails just shot and delete the unnecessary one.
Digital Video Mode Recording without entering the Camera screen: Directly press and hold the Recorder Button for a few seconds and then release to start recording. To finish recording, press the Recorder Button to stop. Tap , Programs, Multimedia, and then Camera, DV Mode. 1. Since only horizontal (landscape) mode is supported, please rotate your Pocket PC 90 degrees when recording. 2.
Icon Meaning Recording quality. The higher the resolution, the larger the file. Select file format Select resolution. The higher the resolution, the larger the file.
Digital Video Mode Using Wizard Tap or to select Wizard. After you finish recording, the Wizard will guide you through how to link to other programs conveniently. This section explains the Wizard tools. n o p nExit Camera oThe photo viewing window stops at the first scene of the video you just recorded.
Speed Shooting Using the Hardware Hotkeys Capture Mode n o p q r nAdjust focus oExit Camera pSwitch between Camera and Video Recording modes qOpen or close the toolbar rAuto focus (X650 only), Camera Shutter, Video Recorder Setting Mode/Wizard Mode nUse the Navigation Button to navigate up, down, left and right to select from the icons on the screen. Press the middle button to execute selection.
Multimedia Manager Tap , Programs, Multimedia, and then Multimedia Manager. You can use Multimedia Manager to manage and view multimedia information such as pictures, music, videos, etc. Preview Multimedia Information n o nSelect the folder you want to display. p oTap to change the order of the list. pPreview thumbnail. Set according q to the multimedia information placed in the folder. If you are r s t u browsing pictures, tap a thumbnail to display the full picture.
Slide Show Function Tap Multimedia Manager, View, and then SlideShow. n nDouble tap anywhere on the screen to exit the slideshow. oPlaying the last picture while not in the slide show looping mode, tap o the screen and then tap the icon to exit the slideshow. ÁRefer to the method described above to exit the slideshow and enter the screen shown on the left. nSelect the picture scale, rotation and view picture properties. n o oLink to other available programs. p pFull-screen view.
Multimedia Manager Tools Tap Multimedia Manager, Tools, and then Setting. n nSlideshow tab: As shown on the left, this is the settings of the slideshow mode. oAssociation tab: Select the desired o p file type you want to open with Multimedia Manager. pFile Browse tab: Set the browsing method. n Tap Multimedia Manager, Tools, and then Delivery. nTap thumbnail. The ; in the upper left corner indicates that it is already selected. oNext: Select the program to link to.
Image Maker * Download Programs For effective use of memory, the programs marked with an asterisk “*”, are posted on our website: http://www.glofiish.com for downloading. Refer to further instructions for use after downloading these programs. Tap , Programs, Multimedia, and then Image Maker. Image Maker is used to create, edit and view pictures. Use it to view and edit the pictures you take. You can also use the relevant Image Maker commands and tools such as rotate, stretch, brightness, etc.
Icon Meaning of the Drawing Tool Box Select foreground and background colors Eraser Pick color Pencil for writing and drawing lines Airbrush Line Curve Rectangle Ellipse Polygon Rounded rectangle Text Select Fill with color Magnifier Brush Icon Meaning of the Drawing Toolbar New document Open Save Multimedia 10-15
Image Wizard * Download Programs For effective use of memory, the programs marked with an asterisk “*”, are posted on our website: http://www.glofiish.com for downloading. Refer to further instructions for use after downloading these programs. Tap , Programs, Multimedia, and then Image Wizard. Image Wizard provides frames, icons, filters and simple drawing tools that you can use to process photos and pictures. Wizard will guide you to complete the process step-by-step.
n o nReturn to the previous step. oInput a name for the file and select the file saving path. pUse system name and save to the specified path. p qSend tab: Send through E-mail or MMS Message.
FM Tuner Tap , Programs, Multimedia, and then FM Tuner. This program is for listening to the radio with headset. The headset will improve radio quality with its built-in antenna. n o p [ \ ] ^ _ nTool bar: cScreen off: This function turns off the screen but leaves the program running. Turn on the power to activate the screen. When the Pocket PC enters sleep mode, the system will shut down the program. dMy Favorite: Manage My favorite radio station list. eBand: Change the band frequency.
n ÁSet the station frequency. nTap and edit the frequency to set a custom station. Note: The frequency must be in the legal range. o oCancel. p pOK. qDelete the previous digit. q n ÁTap the My Favorite Button in the main screen to set My favorite station. o nClose and save the setting. p oThe default value is EUROPE. To q \ change the setting, hold the desired tab for a few seconds. pMy favorite station list. qChoose an empty item and tap the + button in the tool bar to edit the station.
Namecard Manager (X650 only) Tap , Programs, Multimedia, and then Namecard Manager. Provides full name cards management for scanning paper name cards into a digital format. The contacts database from Pocket PC can also be integrated into a unified contacts book. Digitize New Name Cards 1. Tap Recognize. 2. Tip: Before taking a picture, please take the following pointers to improve recognition quality.
3. Take pictures Prepare a name card and adjust the position. Press half the button to activate auto focus. When you hear beeps and the focus frame becomes green from red, press the same button to take a picture. You can directly select on the screen to take a picture. 4. Name card recognition XSelect Language to choose the appropriate language for this name card. YSelect or Identify to recognize the contents on the name card.
X 5. Modify the name card’s contents and confirm XSelect the contents field to make modifications. YWhen selecting the contents field, the name card source will be shown Y Z [ for verification. Double tap on the name card area to zoom to the max viewing. \ ZSelect the field name to modify and adjust the error recognitions. [Choose whether to keep this data entry. \Add this name card to the contacts database on the Pocket PC. Go back to Contacts to view the new entry.
Name Cards Management 1. Tap Manage. X Y Z 2. Main screen for name card management Only recognized name cards will be shown here. [ XEnter the quick search page. Tap a letter and the results for name cards created in Namecard Manager \ will be shown. YDelete the entered text to the left. s ZSearch criteria for name card. All ^ matching name cards for “Name, Work, or Tel” will be shown on the screen. To search for all name cards, please leave the field blank.
[Name card index display area, select an entry to expand its contents. \Display area for the original name card. ]Provides the relevant menu. New: Create a new digital name card. Import: Supported format includes BMP, JPG, and PNG. An existing name card image file can be imported and then processed. Edit: Modify the name card information. Delete: Delete the selected name card. ^Return to the previous page. 3.
11 Companion Programs / Microsoft® Pocket Outlook includes Calendar, Contacts, Tasks, Messaging, and Notes. You can use these programs individually or together. For example, e-mail addresses stored in Contacts can be used to address e-mail messages in Messaging. Using synchronization tools, you can synchronize information in Microsoft Outlook or Microsoft Exchange on your desktop computer with your Pocket PC. You can also synchronize this information directly with a Microsoft Exchange server.
Calendar: Scheduling Appointments and Meetings Use Calendar to schedule appointments, including meetings and other events. You can check your appointments in one of several views (Agenda, Day, Week, Month, and Year) and easily switch views by using the View menu. nTap to go to today. oTap to display or edit the n o appointment details. pView menu. qTap Menu and then New Appointment to create a new appointment.
Create an Appointment n Tap to return to the calendar (the o n appointment is saved p q automatically). r oTap to choose from predefined text. pTap to choose from previously s entered locations. qTap to select a time. rTap to select a date. sNotes is a good place for maps and directions. 1. If you are in Day or Week view, tap the desired date and time for the appointment. 2. Tap Menu and then New Appointment. 3. Using the input panel, enter a description and a location. Tap first to select the field. 4.
Use the Summary Screen When you tap an appointment in Calendar, a summary screen is displayed. To change the appointment, tap Edit. n nView appointment details. oView. pTap Menu and then Edit to change o appointment. p Create Meeting Requests You can use Calendar to set up meetings with users of Outlook or Pocket Outlook. The meeting request will be created automatically and sent either when you synchronize Inbox or when you connect to your e-mail server.
Schedule a Meeting 1. Create an appointment. 2. In the appointment details, hide the input panel, and then tap Attendees. 3. From the list of e-mail addresses you’ve entered in Contacts, select the meeting attendees. The meeting notice is created automatically and placed in the Outbox folder. For more information on sending and receiving meeting requests, see Calendar Help and Messaging Help on the Pocket PC.
Contacts: Tracking Friends and Colleagues Contacts maintains a list of your friends and colleagues so that you can easily find the information you’re looking for, whether you’re at home or on the road. n nTap and enter part of a name to quickly find it in the list. o oTap to display the contact details. p pTap and hold to display a pop-up q menu of actions.
Create a Contact 1. Tap New. And then select a contact type. 2. Using the input panel, enter a name and other contact information. You will need to scroll down to see all available fields. 3. To assign the contact to a category, scroll to and tap Categories and select a category from the list. In the contact list, you can display contacts by category. 4. To add notes, tap the Notes tab. You can enter text, draw, or create a recording.
Find a Contact There are four ways to find a contact: VIn the contact list, enter a contact name in the box under the navigation bar. To show all contacts again, clear text from the box or tap the button to the right of the box. VIn the contact list, tap Menu, Filter and then select the type of contact that you want displayed. To show all contacts again, select All Contacts. To view a contact not assigned to a category, select No Categories.
Use the Summary Screen When you tap a contact in the contact list, a summary screen is displayed. nView contact details. All of the n available contact information is listed, you can tap and use easily. oProvides the relevant menu. o For example, select Edit to change the contact information. Or select Save to SIM or Save to Contacts to duplicate to Contacts or SIM phonebook. p pTap to view notes.
Tasks: Keeping a To Do List Use Tasks to keep track of what you have to do. n nIndicates high priority. oTap to display or edit the task details. o pTap and hold to display a pop-up menu of actions. p qTap to change the status. rProvides the relevant menu. q r For example, tap Filter to select the category of tasks you want displayed in the list. Tap Sort By to select the sort order of the list. Or tap Options to change the way information is displayed in the list.
Create a Task 1. Tap Menu and then New Task. 2. Using the input panel, enter a description. 3. You can enter a start date and due date or enter other information by first tapping the field. If the input panel is open, you will need to hide it to see all available fields. 4. To assign the task to a category, tap Categories and select a category from the list. In the task list, you can display tasks by category. 5. To add notes, tap the Notes tab. You can enter text, draw, or create a recording.
Use the Summary Screen When you tap a task in the task list, a summary screen is displayed. To change the task, tap Edit. n o nView task details. oTap to show and hide additional summary information. View notes. p p qTap to change task.
Notes: Capturing Thoughts and Ideas Quickly capture thoughts, reminders, ideas, drawings, and phone numbers with Notes. You can create a written note or a recording. You can also include a recording in a note. If a note is open when you create the recording, it will be included in the note as an icon. If the note list is displayed, it will be created as a stand-alone recording. nTap to change the sort order of the n list. o oTap to open a note or play a recording.
Create a Note 1. Tap New. 2. Create your note by writing, drawing, typing, and recording. For more information about using the input panel, writing and drawing on the screen, and creating recordings, see “Enter Information on Your Pocket PC.” n nTap to return to the note list (the note is saved automatically). oTap to show or hide the input panel. pProvides the relevant menu. For example, check View Recording Toolbar to add a o p 11-14 recording to the note; or check Draw to write on the screen.
Word Mobile Word Mobile works with Microsoft Word on your desktop computer to give you easy access to copies of your documents. You can create new documents on your Pocket PC, or you can copy documents from your desktop computer to your Pocket PC. Synchronize documents between your desktop computer and your Pocket PC so that you have the most up-to-date content in both locations. Use Word Mobile to create documents, such as letters, meeting minutes, and trip reports.
n o p nSelect the type of folder you want displayed in the list. oTap to change the sort order of the list. Tap to open a document. q p qTap and hold an item to see a pop-up menu of actions. r rTap to create a new document. You can change the zoom magnification by tapping View and then Zoom. Then select the percentage you want. Select a higher percentage to enter text and a lower one to see more of your document.
Using the input panel, enter typed text into the document. For more information on entering typed text, see “Enter Information on Your Pocket PC.” To format existing text and to edit text, first select the text. You can select text as you do in a Word document, using your stylus instead of the mouse to drag through the text you want to select. You can search a document to find text by tapping Menu, Edit and then Find/Replace. n nTap to return to the document list o (changes are saved automatically).
Excel Mobile Excel Mobile works with Microsoft Excel on your desktop computer to give you easy access to copies of your workbooks. You can create new workbooks on your Pocket PC, or you can copy workbooks from your desktop computer to your Pocket PC. Synchronize workbooks between your desktop computer and your Pocket PC so that you have the most up-to-date content in both locations. Use Excel Mobile to create workbooks, such as expense reports and mileage logs.
Excel Mobile provides fundamental spreadsheet tools, such as formulas, functions, sorting, and filtering. To display the toolbar, tap View and then check Toolbar. n nCell contents appear here as you enter them. oSelect cell contents for the resource o of chart. pInsert Chart Button p qAutoSum Button q rZoom Button r ÁTap Format Chart Button to modify the relevant information, such as titles, scale, type and series.
Tips for Working in Excel Mobile For more information on using Excel Mobile, tap and then Help. Note the following when working in large worksheets in Excel Mobile: VView in full-screen mode to see as much of your worksheet as possible. Tap View and then check Full Screen. To exit full-screen mode, tap View and then Full Screen to restore. VShow and hide window elements. Tap View, Show and then tap the elements you want to show or hide. VFreeze panes on a worksheet.
PowerPoint Mobile View PowerPoint slides created in PowerPoint 97 and above versions on your desktop computer. The supported formats include .ppt and .pps files. n o p nSelect the type of folder you want displayed in the list. oTap to change the sort order of the list. pTap to open a file, and play the slides. qTap to open the file you played last time. q r rProvides the relevant menu. ÁTap on the lower left corner to open the menu. Tap End Show to quit.
Windows Media Player Use Microsoft Windows Media Player for Pocket PC to play digital audio and video files that are stored on your Pocket PC or on a network. To switch to Windows Media Player for Pocket PC, tap and then Windows Media. nUse full-screen to view video. oDisplay website. Find music or video to be played from website. pReturn to the start of the current file or previous file. u qTap to play or pause. t rTap to skip to the next song. n op q r sTap to adjust volume.
Use Microsoft Windows Media Player on your desktop computer to copy digital audio and video files to your Pocket PC. For more information about using Windows Media Player for Pocket PC, tap , and then tap Help.
Internet Explorer Using Internet Explorer Use Microsoft® Internet Explorer Mobile to view Web or WAP pages in either of these ways: VDuring synchronization with your desktop computer, download your favorite links and mobile favorites that are stored in the Mobile Favorites subfolder in Internet Explorer on the desktop computer. VConnect to an Internet service provider (ISP) or network and browse the Web. To do this, you’ll need to create the connection first, as described in “Connect to the Internet”.
Browse the Internet Refer to “Connecting to the Internet” section to connect the Pocket PC to the Internet and start browsing websites. 1. Tap and then Internet Explorer. 2. Input the site address into the address bar at the top of the screen and connect to this site. 3. Use the scroll bar at the right side or bottom of the screen, or press the up or down button on the Pocket PC to view the contents of the entire website.
View Mobile Favorites and Channels nTap the favorite you want to view. oTap to add or delete a folder or n favorite link. o 1. Tap the Favorites button to display your list of favorites. 2. Tap the page you want to view. You’ll see the page that was downloaded the last time you synchronized with your desktop computer. If the page is not on your Pocket PC, the favorite will be dimmed.
Favorite Links During synchronization, the list of favorite links in the Mobile Favorites folder on your desktop computer is synchronized with Pocket Internet Explorer on your Pocket PC. Both computers are updated with changes made to either list each time you synchronize. Unless you mark the favorite link as a mobile favorite, only the link will be downloaded to your Pocket PC, and you will need to connect to your ISP or network to view the content.
5. Synchronize your Pocket PC and desktop computer. Mobile favorites that are stored in the Mobile Favorites folder in Internet Explorer are downloaded to your Pocket PC. If you did not specify an update schedule in step 3, you will need to manually download content to keep the information updated on your desktop computer and Pocket PC. Before synchronizing with your Pocket PC, in Internet Explorer on your desktop computer, click Tools and then Synchronize.
12 Maintaining the Pocket PC / Backup Utility Tap , Programs, Utilities, and then Backup Utility. Backup Utility is used to back up or restore files saved in the Pocket PC. You can back up personal data such as Calendar, Contacts, Tasks, Personal profile, Network settings, Messaging (E-mails and SMS), etc. Storage Space When making backups, you can choose the following storage spaces: 1. My Documents: Data saved here may disappear when you perform a cold boot.
Backup Files Wizard Mode nTap Backup. Next Button and the oTap Wizard will guide through the steps that follow. n p Standard: Switch to the Standard mode. o p Standard Mode Backup your personal data to a storage space. ÁTap the Backup tab. n nTap to check the items for backup. o oTap to select the storage space p from the list. pTap Backup Button to start the backup. q q 12-2 Advanced Button: Enter the Advanced settings screen.
Advanced Settings Options Advanced Button to enter the Under the Backup Files screen, tap Advanced settings screen as shown below. ÁCheck the options as required. nIf you check this option, the Wizard will guide you through the n steps to complete the operation the next time you open Backup Utility. p oCancel Button pOK Button ÁIf you checked “Auto backup files,” tap to enter the screen n shown on the left. o p q nSelect the backup option. oSelect the site to backup to.
ÁIf you checked “Auto backup on schedule,” tap to enter the screen shown on the left. n o p nBackup frequency. q oTap the date button on the right of “Starting” to set the starting date. pTap the time button on the right of “Starting” to set the starting time. qIf you have selected “Weekly,” tap the function button on the right of “Every” to set the day of the week to backup. ÁIf you selected “Manage old backup files,” tap to enter the screen shown on the left.
Restore Files Caution! 1. When restoring files, the system will delete all current data in the Pocket PC and replace it with the backup files. 2. To make sure that files can be restored successfully, do not use the Pocket PC while performing restore. 3. Restore cannot be stopped once it is started. Think carefully before proceeding. 4. After restore completed, your Pocket PC will reboot. Wizard Mode nTap Restore. Next Button and the oTap Wizard will guide through the steps that follow.
Standard Mode Restore the backup personal data from a storage space. ÁTap the Restore tab. n nSelect “Latest” below “Restore o From.” Or select from the list. p oTap backup file name from the list under “File Name.” pTap restoring.
Adding or Removing Programs Programs added to your Pocket PC at the factory are stored in ROM (read-only memory). You cannot remove this software, and you’ll never accidentally lose ROM contents. All other programs and data files added to your Pocket PC after factory installation are stored in RAM (random access memory). You can install any program created for your Pocket PC, as long as your Pocket PC has enough memory.
5. Double-click the *.exe file. nIf the file is an installer, the installation wizard will begin. Follow the directions on the screen. Once the software has been installed on your desktop computer, the installer will automatically transfer the software to your Pocket PC. oIf the file is not an installer, you will see an error message stating that the program is valid but it is designed for a different type of computer. You will need to move this file to your Pocket PC.
Add a Program to the Start Menu Tap , Settings, the Personal tab, and then Menus. ÁCheck the box for the program. If you do not see the program listed, you can either use File Explorer on the Pocket PC to move the program to the Start Menu folder, or use synchronization tools on the desktop computer to create a shortcut to the program and place the shortcut in the Start Menu folder.
VUsing synchronization tools on the desktop computer: Use the Explorer in synchronization tools to explore your Pocket PC files and locate the program. Right-click the program, and then click Create Shortcut. Move the shortcut to the Start Menu folder in the Windows folder. The shortcut now appears on the menu. For more information, see Help. Remove Programs Tap and then Settings. On the System tab, tap Remove Programs.
Manage Memory View Memory Status Tap , Settings, the System tab, and then Memory. ÁTap the Main tab. n nThe status of Storage and Program memory. oFind: Quick link to the Search program. o ÁTap the Storage Card tab. n nCurrent storage card memory o status. oTap to select the built-in or external storage card.
ÁTap the Running Programs tab. nTap a program name in ”Running Programs List” and when it is n highlighted, tap Activate or Stop. oActivate: Start running the program you selected. o Stop: Stop the program you selected. Stop All: Stop all programs in the “Running Programs List.” Find Available Memory Under certain circumstances such as insufficient memory, the Pocket PC cannot allocate memory automatically. Try to solve this problem through the following methods: Tap , Programs, and then Search. 1.
1. Tap , Programs, and then File Explorer. Use File Explorer to move the files you want to keep to external storage cards. Tap and hold the items to be moved, then tap Cut or Copy on the pop-up menu. Move to the storage card and then tap Paste. 2. Use File Explorer to delete files that you no longer need. Tap , Messaging, Menu, Tools, Options, and then the Storage tab. ÁCheck “Store attachments on storage card” to save attached files from E-mails automatically in the storage card in future.
Tap , Programs, Notes/Word Mobile/Excel Mobile, Menu, and then Options. 1. Enter the Notes file list screen. 2. Tap Menu and then Options. 3. Tap the “Save to” function button and select SDMMC from the list. This indicates that you are using your external storage card. Hereafter, new files will be automatically saved to this storage card. Follw the same operation procedure for Notes in Word Mobile and Excel Mobile.
System Information Tap , Settings, the System tab, and then System Information. ÁTap + or - to display or hide the system information.
12-16
13 Tap Voice Commander / , Programs and then Voice Commander. Voice Commander is continuous voice recognition application software in the Pocket PC. Voice Commander allows the user to use their own voice to dial and control functions. Voice Commander has the following features: Fully voice-controlled system that allows the user to complete operations (such as dialing phone or running applications) quickly without using hands.
Starting Voice Commander Here are two methods for running Voice Commander: 1. Tap , Programs, Voice Commander, and then Voice Commander. 2. Voice Commander Button. The system sets the button on the Pocket PC as the exclusive “Voice Commander” button. Just press this button to run Voice Commander. nShow the format of voice command. n oRe-Start Button: Restart Voice Commander. pMenu Button: Settings: Setup Voice Commander. Help: About Voice Commander. o p Exit: Exit Voice Commander.
Voice Command Format Press the Voice Commander Button on the Pocket PC and enter the Voice Commander screen.
Tips All the names in Contacts will automatically become recognizable contacts in the “Voice dialing” syntax. However, if the number of contacts exceeds 1000 entries, the system will not recognize the excessive entries. To add these entries to Voice Commander for recognition, tap Menu and then Settings or run Voice Commander Settings to check and add these contacts manually for voice recognition.
Voice Commander Settings There are two ways to run Voice Commander Settings: Tap , Programs, Voice Commander, and then Voice Commander Settings. Tap Menu and then Settings while using Voice Commander. Voice Commander Settings allows the user to personalize the Voice Commander settings, add and remove contacts or applications within the recognition range, record voice tags or play commands to prompt the user on how to say the correct command.
q Play Button: Play the recorded voice tag for this contact and hear how it is pronounced. Build Button: Record the voice tag for this contact again. r Delete Button: Delete the voice tag for this contact. s tContacts tab: Sets the voice commands for Contacts. Application tab: Sets the voice commands for applications. Digit Training tab: Sets the voice command for digital dialing. Advanced Settings tab: Sets the length and sensitivity for digital dialing.
Tips You can choose which Contacts are to be added to the recognizable range of the Voice Commander. By default, the system automatically adds all names within the recognizable range. If the number of Contacts exceeds 1000 entries, the system will not recognize the excessive entries. To add these contacts to Voice Commander for recognition, manually check the check boxes in front of the contact entries.
Application Settings Page Tap Voice Commander Settings and then the Application tab and the Settings page will list the applications and settings installed by the Pocket PC on and then Programs (whether or not it is selected, with or without voice tag). You can choose which applications are to be added to the recognizable range of the Voice Commander. By default, the system automatically adds all applications as recognizable targets in the < Application > syntax in “Voice open application.
Application example: You want to record Windows Live™ Messengers as “Chat room.” 1. Tap Windows Live™ Messengers. 2. Tap Build Button. 3. When you hear a beep, say the words “Chat room” that you want to record. 4. When you hear a second beep, say “Chat room” again. 5. After recording twice, the system will play the voice you just recorded to indicate that you have created a voice tag. 6.
Music Settings Page Tap Voice Commander Settings and then the Music tab, the settings page will list the music files and configuration status of the specify folder in your Pocket PC or on your storage card. If you add a new music file, the system will update in real-time, automatically adding the file to your recognizable range, saving you the time of searching for your music files. The system will automatically activate all of the music files stored in the following folders: 1.
n o p nCheck box function If the music file name is checked, it can be identified normally. If unchecked, this indicates that it is not within the recognizable range. q r s If the check box is gray and cannot be checked, this indicates that the item is unrecognizable. Build a voice tag to add a gray item into the recognizable range. o Lips icon: Voice tag is built. pTapped music file name is highlighted and can be used with functions.
Advanced Settings Page The Sensitivity setting is for voice recognition. The “Length of phone number” setting specifies the maximum number of digits that can be entered as the phone number. These settings will improve recognition accuracy. nSensitive: When you use this setting, the voice recognition n system is not as strict while performing voice recognition tasks, in other words, under this setting the system will respond to your voice most of the time and you won’t have many non-responsive situations.
FAQ Question: I want to make a call to my friend Andy Miller, but I’m tired of reading manuals. What do I need to know if I just want to make phone calls? Answer: Make sure you have Andy Miller’s name and phone number in the contact database. Press the Voice Commander Button, and say “Call Andy Miller.” The system will guide you through it. Question: I added a new contact but it is not recognized. Answer: 1. The system only recognizes English words and characters or digits.
Question: I performed digit training today, but I found that the accuracy is worse than before, what do I do now? Answer: You can retry the digit training again in a “quiet” place. And if it still doesn’t help, disable the adapted model and use the default one. To disable the adapted model, tap Voice Commander Settings, the Digit Trainer tab, and then uncheck “Use adapted model.” Or just tap Remove All Button to remove the model. It will save you some memory this way.
14 Item Specifications / Description Operating system Windows Mobile® 6 Professional Processor X600: Samsung SC3 2442, 400 MHz X650: Samsung SC3 2442, 500 MHz Memory X600: 128 MB Flash ROM, 64 MB SDRAM X650: 256 MB Flash ROM, 64 MB SDRAM Display X600: 2.8", 320 x 240 (QVGA), 65,536 colors, TFT-LCD X650: 2.8", 640 x 480 (VGA), 65,536 colors, TFT-LCD Communication GSM/EDGE Quad-band: 850/900/1800/1900 MHz GPRS/EGPRS Class B, Multi-slot Class 10 Bluetooth® v2.
Item Interface/Audio Description Built-in microphone and speaker External stereo headset jack Interface/Data USB Sync, headset jack Power supply Battery: 1530 mAh Li-Ion Polymer, rechargeable, replaceable AC Adapter: 100~240 VAC/50~60 Hz, 5V/1A DC Environmental Daily operation: 0°c ~ 40°c; storage: -10°c ~ 50°c temperature Environmental 45% ~ 85% humidity Dimensions 107 x 58 x 14.
15 Regulation Notice and Safety Declaration / SAR Information Read this manual carefully before using. Warning: Reduced electromagnetic waves. Please use properly. For CE Head For FCC Head GSM 0.788 W/kg GSM850 0.433 W/kg DCS 0.459 W/kg PCS 1.14 W/kg WLAN 0.012 W/kg WLAN 0.065 W/kg Co-location 1.188 W/kg For NCC Head Body GSM850 1.01 W/kg GSM 0.788 W/kg PCS 0.75 W/kg DCS 0.459 W/kg WLAN 0.088 W/kg WLAN 0.029 W/kg Co-location 1.
Health and Safety Information Electrical and Battery Safety U Use only the AC adapter provided with this product. Do not use similar items from other products. The provided AC adapter is for use with this product only. Do not use it for other electrical products. U Follow the specifications of the battery manufacturer: Avoid charging the battery when the environmental temperature is higher than 45ºC. Do not store or use the battery when the environmental temperature is higher than 50ºC.
Warranty Security U In case the Pocket PC is damaged, kindly return it to your place of purchase. Do not attempt to disassemble this device on your own as this may void the warranty. U If any hazards result from the failure of the user to comply with usage rules, we will not be held responsible for any resulting warranty claims. Data Security U This company is not responsible for any data loss or damage to the Pocket PC due to improper use.
Safety In Aircrafts U Due to the possible interference caused by this product to an aircraft's navigation system and its communications network, using this product on board an airplane is against the law in most country. Interference With Medical Equipment Functions U This product may cause medical equipment to malfunction. The use of this device is forbidden in most hospitals and medical clinics. Environment Restrictions U Do not use this product in gas or refueling stations.
Explosive Atmospheres U When in any area with a potentially explosive atmosphere or where flammable materials exist, the product should be turned off and user should obey all signs and instructions. Sparks in such areas could cause an explosion or resulting in bally injury or even death. Users are advised not to use the equipment at refueling points such as service or gas stations.
15-6
16 A Index / Birthday Reminder · 2-7, 9-18 About · 2-10 Block Recognizer · 2-20 AC Adapter · 1-1 Bluetooth · 7-7 ActiveSync · 2-7, 6-9, 9-10 Bluetooth Manager · 2-7, 7-7 ActiveSync Setup Wizard · 6-7 Browse the Internet · 11-25 Add Ring tone · 2-7 BT / WLAN / GPS active LED · 1-3 Add Ringtone · 4-13 Bubble Breaker · 2-7 Adding or Removing Programs · 12-7 Built-in camera lens · 1-3 Adjust earphone volume · 4-5 Buttons · 2-9, 5-12 Adjust focus · 10-1, 10-2, 10-10 C Adjust Volume · 5-6 Ca
Clock & Alarms · 2-10 End Button · 4-3, 4-5, 5-12 Cold boot · 1-15 Enter Information · 2-18 Command Bar · 2-4, 5-10 Excel Mobile · 2-7, 11-18 Communication · 14-1 Expansion slot · 14-1 F Connect GPRS · 7-5 Connection · 3-4 Favorites · 11-26 Connection Wizard · 2-10, 7-2 File Explorer · 2-8, 5-9, 12-13 Connections · 2-10, 7-1 Find a Contact · 11-8 Contacts · 2-8, 11-6 Find Information · 5-9 Continuous shutter · 10-6 Flashlight LED · 1-3, 10-2 Create a Contact · 11-7 FM Tuner · 2-7, 10-18
Installing ActiveSync · 6-4 Mini USB port · 1-3 Installing the Battery · 1-5, 4-2 MMS · 9-16 Installing the SIM Card · 1-5, 4-2 MMS Message · 2-7, 9-16 Interface/Audio · 14-2 Multimedia Manager · 2-7, 10-11 Interface/Data · 14-2 Mute · 5-6 Internet Explorer · 2-8, 11-24, 11-25 Mute mode · 4-4 J N Joystick · 1-3 Name Cards Management · 10-23 L Namecard Manager · 2-7, 10-20 LED indicator · 1-7 Navigation Bar · 2-4, 5-10 Left Soft-Key · 1-3, 1-4 Navigation Button · 10-10 Lens · 10-1, 10-2
Power button · 1-3 S Power Button · 1-9, 1-10, 4-2 Satellite Data Update · 2-7, 3-4 Power supply · 14-2 Satellite Navigation · 3-1 PowerPoint Mobile · 2-7, 11-21 Scenarios · 2-7, 5-7 Press and hold Recorder Button · 10-7 Screen · 2-1, 2-10 Press the Recorder Button · 10-7 Search · 5-9, 12-12 Preview mirror · 1-3, 10-1, 10-2 Select a Drawing · 2-25 Processor · 14-1 Select Writing · 2-23 Programs · 2-7 Send and Receive Mail · 9-8 Q Send button · 1-3 Quick Bar hot key · 2-15 Send Button ·
V Speed Dial · 2-7, 4-10, 4-19 Start · 2-3 Vibrate · 5-6 Start a chat · 9-14 Vibration mode · 4-4 Start hot key · 1-3 Video Mode · 10-7 Storage Space · 12-1 Video Recorder · 10-10 Stylus · 1-1 Voice Command Format · 13-3 Stylus holder · 1-3 Voice Commander · 1-3, 2-7, 2-27, Synchronization · 6-1 System Information · 2-10, 12-15 T Tap · 1-10 Tap and hold · 1-10 Task Manager · 2-8, 5-8 13-1, 13-2 Voice Commander Button · 2-27 Voice Commander hot key · 13-2 Voice Commander Settings · 2-7, 13-5 V
16-6
17 FAQ / 1. What features does the Pocket PC have? Answer: nBuilt-in 802.11b/g wireless networking module. oThe built-in camera module’s sensitization, filming quality are better than other brands of Pocket PC in the same class. pThe latest Windows Mobile® 6 Professional operating system, with all its settings stored on a Flash ROM. You won’t have to worry about losing your data even if the Pocket PC runs completely out of power.
3. My Pocket PC cannot boot. What should I do about it? Answer: nMake sure the Pocket PC battery you use still has enough power. oPlug your Pocket PC into the charger, and make sure the red charging indicator lights up. Press the “Power Button.” pIf you have done the above but your Pocket PC still cannot boot, proceed with the following step: Remove the Pocket PC back cover, and check the battery lock is in place. If not, the system cannot be started. 4.
5. Why doesn’t my Pocket PC make any sound? Answer: nTap the speaker icon on the top right of the screen, then select the volume control options, or adjust the volume of the incoming call sound. oAlternatively, you may use the volume control key to control the volume. 6. Why does my Pocket PC screen automatically become dark? Answer: Tap , Settings, the System tab, Backlight, and then the Battery power or the External power tab.
8. The characters on the screen are too small to read. How can I enlarge them? Answer: Tap , Settings, the System tab, Screen, and then the Text size tab. You may adjust the text size as you wish. Also, you may select the landscape orientation in the General tab screen. Try and change them so that you can read more smoothly. 9. The contact point of my stylus is not quite precise.
11. My Pocket PC's Activesync cannot be executed or make a connection. What should I do about it? Answer: nMake sure you have installed Activesync version 4.5 or above. The companion CD contains the software. If you have lost the CD, you may download it from the Microsoft Website. oMake sure the charger as well as the USB cable provided along with the product are already connected up to your PC end.
17-6
First Version: Current Version: Number: December 2007 December 2007, Version 1 20071130
