Specifications

Battery Capacity

Battery Percentage Indicator

(90-100% is Fully Charged, 20-30% is Low to Depleted Battery)

Note: Light will shut off around 20-30% left on Battery Capacity

LCD Display time

Full on

10s/11s/12s

…60s

IR INFA

Enable

/Disable

Menu:

• Start Up – Welcome to Eternal Lighting Screen

•

Switch to Display- When blinking, choose Program RGBWA or RGBWA+UV, press

UP and Enter

• DMX Address and Channel Mode – Press Enter to move up and down between

DMX Addr and CH. Press Down/Up to scroll through choices. Press Enter to save a

command then press Menu to back out.

•

Master/Slave – Press Up or Down to change the command of Master or Slave, Enter

to save the command. (NOTE: In order to use the IR Remote, put the fixture in

Master Mode. The fixture will not respond to the IR Remote if it is in Slave Mode.)

• Manual – Press Enter to go through Red, Green, Blue, White, Amber, and UV. Press

Up or Down to adjust color brightness on a scale of 0-255. Enter to save. This serves

as the Master Dimmer for all the Pre-set colors.

• SHND –Press Up to scroll through options: Color, Sound, and Fade. Enter to select

choice.

o Color – Pre-set colors (1-50), after color 50 is AUTO change (Speed 1-8).

After AUTO, is Custom Color A – E; Enter make a custom color. You can make

5 custom colors that will be saved under A through E.

o Sound

– Sound 1 (auto change when hears sound & Fade when quiet). Sound

2 (Strobe effect when hears sound & Fade when quiet).

o Fade – Color Fade 1 through 10. Fast (1) to slow (10).

• Boot Time and Work Time – Current operating time and total run time

• Battery Capacity – Indication of Percentage left on the battery

• LCD Display Time – Choose to have the Display back lit Full On/10sec-60sec

• IR INFA – Enable or Disable

EchoICON and EchoEDGE Manual Eternal Lighting Updated 07/19/2014