EchoICON and EchoEDGE Manual
Introduction: Thank you for your purchase. The EchoICON/EchoEDGE RGBWA+UV LED is a DMX intelligent LED par light. This LED par light is for the serious production company looking for high powered LED output with (8) 18Watt 6in1 RGBWA+UV LEDs. Unpacking: Thank you for purchasing the EchoICON/EchoEDGE RGBWA+UV light fixture. Every EchoICON/EchoEDGE RGBWA+UV has been thoroughly tested and has been shipped in perfect operating condition.
Features & Technical Specifications: (8) 18 Watt All in One RGBWA+UV LEDs All in One LEDs RGBWA+UV Fixture - RED, GREEN, BLUE, WHITE, AMBER and UV! 3CH, 4CH, 5CH, 8CH, 11CH or 13CH DMX Modes Flicker Free Refresh Rate >400 Hz (HDTV Video, Guaranteed No Flicker) Ideal for ideal for HDTV recordings with Flicker Free operation Sound Active with 2 Sound Active Modes (1 Without Strobe/1 With Strobe) Auto Mode with 8 Speed Settings Smooth Color Mixing Fade mode wit
Welcome to Start Up ETERNAL LIGHTING Switch to Display CUBEecho RGBWAI (Note: I = UV: Ultra Violet) Version 1.0 DMX addr DMX addr: 001-512 CH mode CH-mode: 3 / 4 / 5 / 6 / 8 / 11 /13 Mast/Slave Mast / Slave Manual R/G/B/W/A/I (000-255) Color 01-50 NOTE: Do not operate in Color50 with all colors at 255 other than Testing for short time.
Menu: DMX Address and Channel Mode – Press Enter to move up and down between DMX Addr and CH also press Enter to save a command. Master/Slave – Press Up or Down to change the command of Master or Slave, Enter to save the command. (NOTE: In order to use the IR Remote, put the CUBEecho in Master Mode. The CUBEecho will not respond to the IR Remote if it is in Slave Mode.) Manual Color Mix – Press Enter to go through Red, Green, Blue, White, and Amber.
Infrared remote control: To control the fixture you must aim the controller at the front of the fixture. To use the remote control, you must first activate the fixture’s infrared receiver. To activate the fixtures infrared receiver you should press the button MAST on the remote control, when the display screen show “yes” means the light is on mast mode, Press “Slav” to chose the slave mode. ON/OFF turn on /off the light, If you don’t need the light for a while, you could press OFF to save electric energy.
DMX Values and Functions: DMX Cannel Mode 3ch / 4ch / 5ch / 6ch / 8ch / 11ch / 13ch 3CH Mode EchoEDGE & EchoICON Value RGBWA+UV 8pc 18 Watt x 6in1 CH1 0-255 RED dimmer (0-255) CH2 0-255 GREEN dimmer (0-255) CH3 0-255 BLUE dimmer (0-255) 4CH Mode EchoEDGE & EchoICON Value RGBWA+UV 8pc 18 Watt x 6in1 CH1 0-255 RED dimmer (0-255) CH2 0-255 GREEN dimmer (0-255) CH3 0-255 BLUE dimmer (0-255) CH4 0-255 WHITE dimmer (0-255) 5CH Mode EchoEDGE & EchoICON Value RGBWA+UV 8pc 18 Watt x 6in1 C
6CH Mode EchoEDGE & EchoICON Value RGBWA+UV 8pc 18 Watt x 6in1 CH1 0-255 RED dimmer (0-255) CH2 0-255 GREEN dimmer (0-255) CH3 0-255 BLUE dimmer (0-255) CH4 0-255 WHITE dimmer (0-255) CH5 0-255 AMBER dimmer (0-255) CH6 0-255 Ultra Violet/I dimmer(0-255) 8CH Mode EchoEDGE & EchoICON Value RGBWA+UV 8pc 18 Watt x 6in1 CH1 0-255 RED dimmer (0-255) CH2 0-255 GREEN dimmer (0-255) CH3 0-255 BLUE dimmer (0-255) CH4 0-255 WHITE dimmer (0-255) CH5 0-255 Auto CH6 0-255 Auto Slow
11CH Mode EchoEDGE & EchoICON Value RGBWA+UV 8pc 15 Watt x 6in1 CH1 0-255 RED dimmer (0-255) CH2 0-255 GREEN dimmer (0-255) CH3 0-255 BLUE dimmer (0-255) CH4 0-255 WHITE dimmer (0-255) CH5 0-255 AMBER dimmer (0-255) CH6 0-255 R, G, B, W dimmer (0-255) CH7 0-255 R, G, B, A dimmer (0-255) CH8 0-255 Auto CH9 0-255 Auto Slow to Fast (0-255) CH10 0-255 R, G, B,W, A STROBE from slow to fast (0-255) CH11 0-255 SOUND 1 (Off 0-15, ON 16-100 Color change, Fade and Strobe, ON 101-255
CH9 0-255 Ultra Violet/I dimmer (0-255) CH10 0-255 Auto CH11 0-255 Auto Slow to Fast (0-255) CH12 0-255 R, G, B,W, A STROBE from slow to fast (0-255) CH13 0-255 SOUND 1 (Off 0-15, ON 16-100 Color change, Fade and Strobe, ON 101-255 Color Change & Fade) For more information, please contact Support by email at support@eternallighting.
