Datasheet

Page 31 of 36
• One time service code: One time code, #
• Manual key: Turn the override key 90 degree clockwise, then turn the handle
V. Terms:
Program code: The program code puts the lock into a programming mode. It will not lock/unlock the lock. When #, program code, #
is entered, the red LED starts to flash indicating the lock is in a programming mode. If more than 6 seconds pass in between
programming entries, the lock will return to normal operational state. For maximum security it is necessary to change the default
program code.
Installer code: Installer code is a default temporary code (0) for installer testing the lock. The code will be deleted after the first new
user code is added to the lock.
User code: User code is the Normal code for the day-to-day operations.
Service code: Service Codes are used for a special purpose such as maintenance personnel or vendors. Service Code
only grants one time access. Total of 10 sets of service codes can be programmed to each lock.
Index #*: Each code or iButton will associate with a unique number, we call it index# (or slot#). The Index # is auto generated by
lock and starts with 000. The highest Index# will be 299; therefore up to300 users can be added to each lock.
* Please log the user code along with its index # for future reference
Passage mode: When Passage Mode is enabled, the lock will stay in unlocked after first valid entry. Re-enter a valid entry to lock
back.
Storehouse mode: for each valid entry, lock will automatically lock back in 5 seconds.
Lockout: Enable the Lockout mode will freeze the lock at its current state (Lock or unlock), temporarily disable all the user codes and
iButton keys. Re-enter the function code 99 to disable the lockout mode, and resume
Clearing lock memory:
Press and hold reset button for 10 seconds with 3 short beeps; it will delete all the codes, iButtons, and restore factory default setting.
VI. Functions
How to change programming code (and not delete existing user codes)
 Function Code: 11#
¾ {#}+{default master code#}+{11#}+{new master code#}+{new master code#}
How to change programming code (and delete all existing user codes)
 Function code: 22#
¾ {#}+{current master code#}+{22#}+{new master code#}+{new master code#}
How to enable daytime saving
 Function Code: 31#
¾ {#Master code#}+{31#}
How to set date and time
 Function Code: 88#
¾ {#Master code#}+{88#}+{yymmddhhmm#}
How to add one user code (no time restriction)
 Function Code: 01#
¾ {#Master code#}+{01#}+{user code# # #}
How to add multi-user code (no time restriction)
 Function Code: 01#
¾ {#Master code#}+{01#}+{user code(1)# # #}+{user code(2)# # #}+{user code3###} … and so on