SDS

TTI 2-CYCLE WITH ETHANOL SHIELD
Page 1 of 8
Safety Data Sheet
Conforms to HCS 2012 (29 CFR 1910.1200)
Section 1. Identification
Product identifier
Product Name: TTI 2-Cycle with Ethanol Shield
Other names: F2935
Part/Product Number(s): AC99105
Material Use: 2-cycle engine fuel additive
Uses advised against: Not for use in non-2-cycle engines
Manufacturer: Omni Specialty Packaging, LLC
10399 Hwy 1 South
Shreveport, LA 71115
1-318-524-1100
Issuing date: April 29, 2015
Revision date: April 29, 2015
Revision number: 1
Company contact: OMNI EHS Department; E-Mail: sds@osp.cc; Contact phone: 318-524-1100
(Monday-Friday, 8:00 AM 4:00 PM, CST)
In case of emergency : CHEMTREC: Within USA and Canada: 1 (800) 524-9300 (24/7)
CHEMTREC Outside USA and Canada: +1 703-527-3887 (24/7
Section 2. Hazards Identification
OSHA/HCS Status: This product is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR
1910.1200).
Classification of the substance or Mixture: Flammable Liquids Category 4
GHS Label Elements
Hazard pictograms:
Signal word: Warning
Appearance: Blue-green Physical State: Liquid Odor: Petroleum distillates
Hazard statement: Combustible Liquid.
Precautionary statements
General: Read label before use. Keep out of reach of children. If medical advice is needed, have product
container or label at hand.
Prevention: Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Avoid breathing
mist/vapors/spray. Use only outdoors or in a well ventilated area. Keep container tightly closed
Wear protective gloves/protective clothing/eye protection/face protection
Response: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with
water/shower.
Storage: Store in a well-ventilated place. Keep cool.
Disposal: Dispose of contents/container to an approved waste disposal plant.
Hazards not otherwise classified (HNOC): Defatting to the skin. Hot motor oil may cause potentially serious burns.

Summary of content (8 pages)