INSIDE THIS INSTRUCTION MANUAL IMPORTANT INFORMATION 1. 2. 3. 4. 5. 6. 7. 8. 9) 10) 11) 11) 12) 13) 14) 15) 2 Read all of these instructions before using the ACT-1515X(F). Follow all instructions contained in this manual. Keep these instructions in a safe place where they can be found and referred to in the future. Use common sense when operating your ACT-1515X(F) and heed all warnings included in your operating manual. Do not use the ACT-1515X(F) near water.
The B-52 Pro-Audio speakers described in this instruction manual are intended for use directly on the floor, ground or stage. The ACT-1515X described in this manual should NEVER be flown. This model is intended primarily for use in mobile installations. A flyable version of the ACT-1515X, the ACT-1515XF has flying hardware installed which is suitable for suspending a single ACT-1515XF. Repeated exposure to direct sun will significantly shorten the useful life of the loudspeaker system.
7) INPUTS: This XLR connector accepts a balanced input signal cable. Balanced means the signal is referred to a ground whose voltage is always centered between the voltage present 6) OUTPUT: This connector is shorted to the INPUT allowing daisy chaining of the input signal. Therefore you do not need to y-cable out of your mixer or audio device to get an additional full range signal(s) to another active system nearby your ACT-1515X(F) speaker system.
11) FUSE HOLDER: House a 8 amp (115 Volts) or 4 amp (230 Volts) 3AB size slow-blow fuse. REPLACE ONLY WITH SAME KIND !!!! NOTE!!! Very often a blown fuse is a symptom of a serious problem with the amplifier or speaker. Under normal operating conditions the fuse should NEVER go open. It does so only under fault conditions. Take extreme care with household electricity as it has the potential for deadly harm.
CONNECTIONS / IMPORTANT INFORMATION COMMON CONNECTION FOR THE ACT-1515X ����� ������� ����� ������ ����� ������� ����� ������ ����� ��� ����� ��� ��� ������ ����� ���� ���������� ������ ���� ������ ������ CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ��������� ��� ������� ���� ����� ��� ����������� ������� ��� ���� ������� ������������������������������������� ������������������������������������ ��� ����� ������������ ������ ��������� ������ ���� ���������� ��� ���������� ���������� ��������� ���
LIMITED WARRANTY Thank you for choosing a B-52 sound product. B-52 manufactures some of the world’s best sounding and most reliable professional speaker systems, amplifiers and components. E.T.I. Sound Systems, Inc., makers of B-52 Professional Audio equipment, take great pride in thoroughly testing each B-52 product prior to shipment. B-52 CABINETS: E.T.I. Sound Systems, Inc.
B-52 PROFESSIONAL 3383 Gage Avenue, Huntington Park, CA, 90255 Phone: 323-277-4100 Fax: 323-277-4108 National: 1-800-344-4ETI Internet: www.B-52PRO.com E-mail: info@B-52PRO.