- B-52 Professional Owner's Manual Speaker System Matrix 1000 V2

ManualsBrandsETI Sound Systems, INC ManualsPortable SpeakersMatrix 1000 V2

Summary of content (8 pages)

PAGE 1
PAGE 2
INSIDE THIS INSTRUCTION MANUAL Important Safety Instructions / Specifications ..........................................................2 Important Information...................................................................................................3 Amplifier Descriptions..................................................................................................4 Set-up & Warranty Information....................................................................................
PAGE 3
The MATRIX 1000 V2 Active Speaker System Congratulations on your purchase of this B-52 Professional MATRIX 1000 V2. The MATRIX 1000 system is a complete sound reinforcement solution consisting of two 10” two-way speakers and an active 15” subwoofer. The subwoofer enclosure is equipped with a three channel amplifier and all the electronics required to run the system. The electronic circuitry was fine tuned to match the two-way speakers for the best possible sound.
PAGE 4
DESCRIPTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. AMPLIFIER: The Matrix 1000 amplifier panel. LEFT SPEAKER OUTPUT: Speakon-style connector output for left monitor. COOLING FANS: Rear cooling fans for built-in 3-channel amplifier. Ensure these cooling fans are clear of external obstructions for efficient operation. POWER CORD CONNECTOR: For attachment of the included power cord. FUSE HOLDER: Contains primary fuse. See warning below for important safety information.
PAGE 5
GETTING TO KNOW YOUR MATRIX 1000 V2 SUBWOOFER AMPLIFIER 16 15 14 13 12 11 10 9 8 NOTE: Use Pin #: 1+ and 1- 19 18 3 4 5 7 6 5
PAGE 6
Setting Up Your MATRIX 1000 V2 Speaker System The MATRIX 1000 consists of one subwoofer and two 10” two-way speakers. Connect the right and left signals from your mixer (master left/right, line out) to the balanced input sockets of the MATRIX 1000 using standard XLR cables.
PAGE 7
DUAL SET-UP B -52 PRO FESS IONAL MIXER / SOUND SOURCE B -52 PRO FES SIONAL Using a dual MATRIX 1000 system will cover a wider area and can be used for a larger audience. Connect the LEFT output from your mixer to the system’s INPUT LEFT. Take a short XLR cable and connect one end of it from the THROUGH LEFT output to the INPUT Limited Warranty Thank you for choosing a B-52 sound product.
PAGE 8
B -52 PR OFESSIO N A L E.T.I. SOUND SYSTEMS, INC. 3383 Gage Avenue, Huntington Park, CA, 90255 Phone: 323-277-4100 Fax: 323-277-4108 National: 1-800-344-4ETI Internet: www.B-52PRO.com E-mail: info@B-52PRO.