- B-52 Pro Stereo Amplifiers Instruction Manual Matrix 200

ManualsBrandsETI Sound Systems, INC ManualsAmplifierMatrix 200

Summary of content (8 pages)

PAGE 1
PAGE 2
INSIDE THIS INSTRUCTION MANUAL Important Safety Instructions / Features .......................................................................2 Product Features / Precautions.....................................................................................3 Amplifier and Mixer Descriptions .................................................................................4 Set-up & Warranty Information ....................................................................................
PAGE 3
The MATRIX-200 Powered Stereo Mixer with DSP CONGRATULATIONS ON YOUR PURCHASE OF THIS B-52 PROFESSIONAL MATRIX-200. The MATRIX-200 is the newest member of the popular B-52 MATRIX family of active systems. Compact and portable, the MATRIX-200 can deliver powerful, clean and accurate sound, ideal for applications such as karaoke, music playback, or small stage soundreinforcement.
PAGE 4
MATRIX-200 FRONT PANEL CONTROLS MASTER SECTION The Master Section gives the operator overall control of the settings that apply to all inputs. 1. MASTER - BASS: Adds or subtracts bass to the MATRIX-200 output. 2. MASTER - MID: Adds or subtracts the mid-range frequencies produced by the MATRIX-200. This control will add vocal clarity or instrument presence. 3. MASTER - TREBLE: Adds or subtracts the high range frequencies in the overall mix. 4.
PAGE 5
PAGE 6
MATRIX-200 REAR PANEL 1. LOUDSPEAKER OUTPUTS – RIGHT and LEFT: Connect to right and left speakers accordingly. Use only speakers supplied with MATRIX-200 System. 2. SUBWOOFER OUTPUT: XLR output to connect optional active subwoofer to the MATRIX-200. While the MATRIX-200 is a full range active system, the very low frequency performance can be enhanced by adding an external subwoofer. The subwoofer will both extend the range of the system, and add increased low frequency output ability.
PAGE 7
MATRIX-200 INPUT PLATES Y-CABLE SET-UP FOR PATCH SECTION MONO/RING 1/4” 1/4” 1/4” Stereo Jack RING Tip MONO/TIP TIP Sleeve Ring A tip, ring, sleeve Y-cable used in the patched section of the MATRIX-200 allows you to insert external devices and improve the performance of the system. This Y-cable is needed in the insert and effects sections. Please refer to the wiring plan above. Insert (Left and Right), refer to #19 on page 4: TIP: Input of the MATRIX-200; connects to the output of the external device.
PAGE 8
B -52 PR OFESSIO N A L E.T.I. SOUND SYSTEMS, INC. 3383 Gage Avenue, Huntington Park, CA, 90255 Phone: 323-277-4100 Fax: 323-277-4108 National: 1-800-344-4ETI Internet: www.B-52PRO.com E-mail: info@B-52PRO.