Instructions / Assembly

ManualsBrandsETi ManualsCommercial LightingCommercial 18 in. Round White 1000w HID Equivalent 38000 Lumen Integrated LED High Bay (Motion Sensor Compatible)

Pre-Installation

PLANNING INSTALLATION

WARNING: Shut off the power at the circuit breaker or fuse panel before removing the old ﬁ xture.

NOTE: Keep your receipt and these instructions for proof of purchase.

TOOLS REQUIRED

Wire

Strippers

Safety

Goggles

Ladder Gloves

Hex Key

#4 #5

Phillips

Screwdriver

Power Drill

with drill bits

Wire

Cutters

Junction Box (not included)

Screw (not included)

Motion Sensor (not included)

Screw Nut (not included)

3 WWW.ETISSL.COM

Please contact 1-855-384-7754 for further assistance.

Table of Contents

Table of Contents ...................................2

Safety Information ..................................2

Warranty ..........................................2

Pre-Installation .....................................3

Planning Installation ...............................3

Tools Required ....................................3

Hardware Included .................................3

Package Contents .................................4

Installation ........................................4

Yoke Mount ........................................4

Hook Mount ........................................5

Conduit Mount .....................................6

Motion Sensor Installation ..........................7-8

Care and Cleaning ..................................7

Troubleshooting ....................................7

Safety Information

NOTICE: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. CAN ICES-005 (B)/NMB-005(B).

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

□ Reorient or relocate the receiving antenna.

□ Increase the separation between the equipment and the receiver.

□ Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

□ Consult the dealer or an experienced radio/TV technician for help.

Warranty

This product is warranted for a period of 5 years from the date of original purchase against defects in materials and workmanship. If this

product should fail to operate due to defects in material or workmanship within 60 months of purchase, see www.etissl.com for details.

This product will be repaired or replaced, at ETi’s option. This warranty is expressly limited to repair or replacement of product, and liability

for direct, incidental, or consequential damages is hereby expressly excluded. Some states do not allow exclusions of direct, incidental or

consequential damages, so the above limitation of exclusion may not apply to you. This warranty gives the consumer specifc legal rights,

which vary from state to state. WARRANTY IS VOID IF PRODUCT IS NOT USED FOR THE PURPOSE WHICH THIS PRODUCT IS MANUFACTURED.

Part Description Quantity

AA Inner Six Angle M6 Screw 2

BB Silicon Flat Washer 2

CC Yoke Mounting Bracket 1

DD Mounting Hook with Captive Screw 1

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Hardware for motion sensor installation is not included, please contact ETi for separate purchase.