Product Instruction

10


3.2.2 将灯具的电源盒盖板用螺丝刀拆掉（吸顶安装时电源盒盖板不用安装）；将市电线缆从
方孔放入电源盒，把灯具挂进已装好的吸顶支架上，用配件螺钉（JJ）在两边的 4 个位置紧
固，如下图。
a.Remove thedriverboxcoverplate,punchoutthe knockoutin thedirectionofthe arrowby
usingscrewdriver.
b.Feedthewiringfromtheelectricalboxtothedriverboxthroughthesquareopening.
c. Install the fixture (A) to the surface
mounting bracket, tighten the surface mounting bracket
usingfourscrews(JJ).


