Product Instruction
6
3 安装方法 Methodofapplication
注意：灯具安装前务必将电源切断，严禁带电操作！
Caution:disconnectthepowerbeforeinstallation.
3.1 吊链安装 Suspension Mounting
3.1.1 取下电源盒盖板，用螺丝刀扭掉敲掉箭头所示敲落孔，把软管(带 1/2″或 3/4″接头,
用户自备)内的线穿过电源盒盖板，软管卡入刚刚敲落的孔；
a.Remove thedriverboxcoverplate,punchoutthe knockoutin thedirectionofthe arrowby
usingscrewdriver.
b.Putthescrewsasideastheywillbeneededtoreattachthedriverboxtothefixturebody(A)in
alater
step.
c.Maketheconduit(1/2inor3/4inconnector,notincluded)throughthedriverboxcoverplate.