Instructions / Assembly

7 WWW.ETiSSL.COM
Please contact 1-855-384-7754 for further assistance.
Model No. Part No. Maximum Connected Units
53502111 UC-12-5-930-SV-D 40
53503111 UC-18-9-930-SV-D 30
53504111 UC-24-12-930-SV-D 25
HH
AA
AA
II
5
Operating the light fixture
□ Use the toggle switch on the light fixture to control the lights.
□ If the under cabinet lights are installed on a dimming circuit, use
the dimmer switch to adjust the brightness.
NOTE: Color of light warms from 3000K to 2200K when dimmed.
Installation (continued)
Toggle Switch
WARNING: RISK OF ELECTRIC SHOCK. Disconnect power to the strip light before linking additional strip lights.
□ Multiple light fixtures can be connected,
up to a maximum of 300 total watts.
Only the first light fixture needs to be
plugged into an electrical outlet or direct
wired.
□ Provide power to the fixtures only after
all linking connections have been made.
□ Connect each additional fixture using
either the linking cable (HH) or end-
to-end connector (II). Remove the end
cover and insert either the end-to-end
connector (II) or linking cable (HH) into
the receptacle in the end of each light
fixture (A). When using the linking cable
(HH), the maximum distance between
two light fixtures is 14.5 in. using the
linking cable (HH) provided.
□ Use wire clips (CC) to affix the linking
cable (HH) to the underside of the
cabinet, if desired.
Linking Feature