Specification

ETi Solid State Lighting
720 Northgate Parkway, Wheeling, IL 60090 | TEL: [phone]
E-mail: [e-mail] | www.ETiSSL.com.com
All specications are subject to change without notice.
All reported values are nominal or typical values, measured under laboratory conditions @ 25
o
C (77
o
F).
Actual performance can vary slightly as a result of end-user application & environment.
ESS1001A | October 22nd, 2020 | Page 5 of 6
DLLP-3IN
3” LowPro Canless Direct Mount Downlight
5-CCT ColorPreference
®
| 1.1” Ultra-low Prole | JA8 | ENERGY STAR
®
| 5-yr Warranty
PRODUCT SPECIFICATIONS
Construction
Die-cast aluminum housing design for maximum thermal management and performance for use in
both IC and non-IC applications. High impact, diuse polymer lens provides direct view shielding of LED
array providing zero pixelation and overall visual comfort.
Electrical
Remote 120V 60HZ constant current driver engineered to provide noise free operation. Continuous
icker-free dimming from 100% to as low as 10% with select TRIAC dimmers (recommended using
dimmers with low end trim adjustment). Always consult dimmer manufacturer for proper use,
installation and compatibility (some dimmers may require a neutral in the wall box). 70.8% lumen
maintenance at 54,000 hours (L71/54,000) per IES TM-21.
Optics
Uniform illumination is achieved by the coupling of the LED platform with a high impact polymer
diusing lens. The optical system creates an extremely uniform wide distribution with optimized xture
to xture spacing. Diusing lens provides a uniform and soft visual appearance when in direct view with
no LED pixelation and provides exccellent visual comfort.
Compliance & Certification
All luminaires are built to UL1598 standards with appropriate UL/cUL labels. Suitable for wet location
use. Adheres to LM63, LM79, LM80 and TM21 industry standards for xture performance and lumen
maintenance calculations. ENERGY STAR
®
listed product. Always refer to ENERGY STAR
®
database for
current listings. Product can be used to comply with California Title 24 High Ecacy requirements.
Product certied to California Appliance Eciency Database under JA8.
Warranty
The DLLP series of luminaires ships with ETi SSL’s 5-year standard warranty.
(Terms & Conditions apply).
Load Information
Power Factor > 0.90
THD n/a
Frequency 60 Hz
Sound Rating < 20 Dba
Low Temp Start -25
o
C (-18.4
o
F)
Max Temp 40
o
C (104
o
F)
Unit Weight 0.8 lbs
Shipping Information
Size Unit Weight
1
Pallet
2
(49”l x 41”w x 52”h)
3” 1.0 lbs 648 units per
1. Case pack weighs 19.8 lbs (24 units/case pack).
2. There are 27 case packs per pallet.
Mounting & Installation
Two low-prole spring retention clips are designed to retain the downlight in drywall or drop ceiling
applications without the need of a separate recessed housing or junction box for installation. Can
be easily installed and serviced from below the mounting/ceiling surface. Minimum 2” plenum space
required for the remote driver box installation. Installer must ensure tment compatibility in any
application and overall compliance to all applicable local and national building and electrical codes.
Lumen Maintenance
Ambient
Temperature
TM-21 Lumen Maintenance
(54,000 hours)
25
o
C (77
o
F) > 70.81%
ColorPreference
®
Field Selectable CCT
Patented ColorPreference
®
eld selectable color temperature system and driver helps to provide
added design exibility and simplied SKU reduction and reduced complexity. An integrated
switch on the remote driver box toggles between 2700K, 3000K, 3500K, 4000K and 5000K.
(set to 2700K standard from the factory).
KEY DIMENSIONAL INFORMATION
3.7”
(95.0)
2.1”
(53.9)
1.1”
(28.2)
2.9”
(72.4)
6.6”
(168.0)
2.5”
(63.0)
1.2”
(30.6)
ADDITIONAL DIMENSIONAL DETAILS
Luminous Window: 2.1” dia. (53.9) Ceiling Opening: 3.125” dia. (79.4) Outer Trim: 3.7” dia. (95.0) Prole Height: 1.1” (28.2)
Note: All dimensions are in inches (millimeters). Max ceiling opening not to exceed 3.5” (88.9)
(Search ‘538071##’ on the ENERGY STAR
®
or CEC JA8 Database to view certications.)