Installation Guide

10/8/2012

ETi SSL Inc.

The Americas Headquarters

26650 Renaissance PKW, STE 6

Cleveland, OH 44128 Page 1 of 4

LED Round Flushmount Items #54074141, 54074142, 54075142 5& 54075141

The product package includes the following components:

1. 1 - Round Flushmount Housing

2. 1 - Round Flushmount Diffuser (shipped as part of flushmount housing)

3. 3 - Wirenuts (in parts bag)

4. 2 – 1 ½” Electrical Box Screws (in parts bag)

5. 1 - Installation Manual

Product Description and Characteristics

LED ceiling light can be directly mounted to the household ceiling and occupies little space. It is energy-saving,

environmentally friendly and practically used for emitting soft and even distribution of light.

IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS：

THIS PRODUCT SHALL BE INSTALLED IN ACCORDANCE WITH THE LATEST U.L. SAFETY, NEC AND/OR

LOCAL AUTHORITY HAVING JURISDICTION. INSTALLATION SHALL BE PERFORMED BY A QUALIFIED

ELECTRICIAN UNDERSTANDING THE CONSTRUCTION AND OPERATION OF THIS PRODUCT AND THE

ELECTRICAL REQUIREMENTS INVOLVED.

DANGER - RISK OF ELECTRIC SHOCK-DISCONNECT POWER TO LIGHT FIXTURE BEFORE

INSTALLATION

Risk of fire or electric shock: Use only on 100-277 VAC, 50/60Hz circuits. Installer shall verify operating voltage at the

luminaries prior to installation. This fixture is designed for indoor use ONLY. This installed fixture may not covered by

any thermal insulation material.

Risk of fire or electric shock: LED Round Flushmount installation requires knowledge of luminaires electrical systems. If

not qualified, do not attempt installation. Contact a qualified electrician.

Risk of fire or electric shock: To prevent wiring damage or abrasion, protect wiring from exposed edges of sheet metal or

other sharp objects that may be present in the fixture.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device

may not cause harmful interference, and 2) this device must accept any interference received, including interference that

may cause undesired operation.

THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY LIGHTING (BATTERY TYPE) SYSTEMS FOR

FLUORESCENT LIGHTING PRODUCTS.

PAGE 1
0/8/2012 LED Round Flushmount Items #54074141, 54074142, 54075142 5& 54075141 The product package includes the following components: 1. 1 - Round Flushmount Housing 2. 1 - Round Flushmount Diffuser (shipped as part of flushmount housing) 3. 3 - Wirenuts (in parts bag) 4. 2 – 1 ½” Electrical Box Screws (in parts bag) 5. 1 - Installation Manual Product Description and Characteristics LED ceiling light can be directly mounted to the household ceiling and occupies little space.
PAGE 2
10/8/2012 Pre-Installation Instructions 1. DO NOT USE THIS FIXTURE WITH A DIMMING CIRCUIT. If you presently have dimmer controls, you will need to remove them, and replace them with regular circuits. If you are unfamiliar with electrical installations, we recommend you have a qualified electrician do your installation. 2. WARNING: SHUT OFF POWER AT THE CIRCUIT BREAKER OR FUSE PANEL BEFORE REMOVING THE OLD FIXTURE 3. Remove the existing fixture.
PAGE 3
10/8/2012 Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 6 Fig. 5 ETi SSL Inc.
PAGE 4
10/8/2012 Troubleshooting Guide Minor problems often can be fixed without the help of an electrician. Before doing any work on the fixture, shut off power supply at the circuit panel to avoid electrical shock.