Installation Guide

6/30/2013
ETi SSL Inc.
The Americas Headquarters
26650 Renaissance PKW, STE 6
Cleveland, OH 44128 Page 3 of 6
DO NOT USE WITH DIMMERS.
THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY LIGHTING (BATTERY TYPE) SYSTEMS FOR
FLUORESCENT LIGHTING PRODUCTS.
1. Electrical Characteristics (Typical value):
Length 2ft (54105111, 54105131, 54105141)
Voltage AC (V) 120-277
Current AC (mA) 150
Power (W) 9
PFC >0.9
Rated Frequency (Hz) 50/60
Length 3ft (54130111, 54130131, 54130141)
Voltage AC (V) 120-277
Current AC (mA) 300
Power (W) 14
PFC >0.9
Rated Frequency (Hz) 50/60
Length 4ft (54108111, 54108131, 54108141, 54108161，54145041，54145061，54145062)
Voltage AC (V) 120-277
Current AC (mA) 350
Power (W) 18
PFC >0.9
Rated Frequency (Hz) 50/60
2. Installation
DANGER -RISK OF ELECTRIC SHOCK-DISCONNECT POWER TO LIGHT FIXTURE BEFORE INSTALLATION
To replace fluorescent tube lamp with LED tube lamp, the wiring must be installed according to these instructions to
ensure a complete and safe installation of the LED tube lamp.
Integral LED Tube Lamp Wiring Diagram: