Instructions / Assembly

6
Installation (continued)
7
Connecting to the Power Source
□ Connect the hot and neutral (black and white) solid copper
jumper wires (AA) to the same color wires from the electrical
source.
□ Cover the wire connections using the wire connectors (not
included).
□ Wrap the wire connectors (not included) with electrical tape
for a more secure connection.
8
Replacing the Ballast Cover
□ Replace the ballast cover, if necessary.
9
Installing LED Tubes
□ Install LED tubes (A) with the end labeled “power this
end” to the wired sockets.
□ Turn the tube a quarter turn to lock it in place.
□ Affix the UL Safety Sticker (BB) in a visible location.
10
Attaching the fixture lens
□ Reattach the lens to the fixture.
□ Make sure the lens is secure.
11
Restoring Power
□ Restore power at the electrical panel.
□ Turn on the light switch to activate the fixture.
B
A
AA
AA
B
Wire
Connectors