Installation Guide

2
compatibility list. If you are unfamiliar with electrical installations, we recommend you have a qualified
electrician do your installation.
2. WARNING: SHUT OFF POWER AT THE CIRCUIT BREAKER OR FUSE PANEL BEFORE REMOVING THE
OLD FIXTURE
use only the 1 ½ inch electrical box screws included in the hardware kit. Screw them into the electrical box
until there is about 3/8 inch between the ceiling and the underside of the screw head.
Pre-Installation
Safety Information
The product package includes the following components:
1. 1 - Round Flushmount Housing
3. 3 - Wirenuts (in parts bag)
4. 2 – 1 ½” Electrical Box Screws (in parts bag)
5. 1 - Installation Manual
Product Description and Characteristics
LED ceiling light can be directly mounted to the household ceiling and requires little space. It is energy-saving,
environmentally friendly, and used for emitting soft and even distribution of light.
Package Contents
IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS:
THIS PRODUCT SHALL BE INSTALLED IN ACCORDANCE WITH THE LATEST U.L. SAFETY, NEC AND/OR LOCAL
AUTHORITY HAVING JURISDICTION. INSTALLATION SHALL BE PERFORMED BY A QUALIFIED ELECTRICIAN
UNDERSTANDING THE CONSTRUCTION AND OPE
RATION OF THIS PRODUCT AND THE ELECTRICAL
REQUIREMENTS INVOLVED.
DANGER - RISK OF ELECTRIC SHOCK-DISCONNECT POWER TO LIGHT FIXTURE BEFORE INSTALLATION
by any thermal insulation material.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this
device may not cause harmful interference, and 2) this device must accept any interference received, including
interference that may cause undesired operation.
THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY LIGHTING (BATTERY TYPE) SYSTEMS FOR
FLUORESCENT LIGHTING PRODUCTS.