Item # 1001397562 1001361676 Model # 54655241 54654241 Use and Care Guide LED WRAP LIGHT Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.Com THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this LED light. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents.......................................2 Safety Information.....................................2 Warranty....................................................2 Pre-Installation..........................................3 Planning Installation...............................3 Tools Required........................................3 Package Contents...................................3 Hardware Included..................................3 Installation............................
Pre-Installation PLANNING INSTALLATION Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with the package contents list. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts. Note: Keep your receipt and these instructions for proof of purchase.
Installation Select a suitable location that can support the weight of the fixture. Determine the method of mounting before drilling. WARNING: RISK OF ELECTRIC SHOCK. Ensure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the circuit breaker before removing the existing light fixture or installing the new one. With power disconnected to your electrical box, remove the existing fixture.
Installation (continued) 3 Feeding the wires NOTE: Put the gasket (BB) on any knock out hole on the fixture to better protect the wires. □□ Feed the electrical connection wires through any knock out hole, through the gasket (BB), and then through the mounting bracket (AA). The connection wires can be held in place by the metal tabs, if needed.
Installation (continued) 6 Attaching the housing to the ceiling □□ Drill a 1/8-in. pilot hole into the screw locations marked on the ceiling. You can also use an awl or nail to dimple the screw holes. □□ Install a drywall anchor (DD) and a mounting screw (EE) in each drilled mounting hole, but do not tighten fully. □□ Align the 2 mounting keyholes on the housing (A) with the 2 mounting screws in the ceiling.
Care and Cleaning CAUTION: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box. □□ Clean the fixture with a soft, dry cloth. □□ Do not use cleaners with chemicals, solvents, or harsh abrasives. □□ Do not use liquid cleaner on the LEDs, LED driver, or wiring inside the light fixture. Troubleshooting WARNING: Before doing any work on the fixture, disconnect power to the light fixture.
Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.
Artículo # 1001397562 1001361676 Modelo # 54655241 54654241 GUÍA DE USO Y CUIDADO LÁMPARA LED ENVOLVENTE ¿Preguntas, problemas, piezas faltantes? Antes de devolver el producto a la tienda, llame al Centro de Atención al Cliente de Commercial Electric en el horario de 8 a.m. - 7 p.m., Hora del Este de EE.UU., de lunes a viernes. 9 a.m. - 6 p.m., Hora del Este de EE.UU., sábados. 1-877-527-0313 HOMEDEPOT.
Contenido Contenido.................................................10 Información sobre seguridad..................10 Garantía....................................................10 Previo a la instalación.............................11 Planificación de la instalación..............11 Herramientas necesarias......................11 Contenido del paquete..........................11 Piezas Incluidas....................................11 Instalación..............................................
Previo a la instalación Planificación de la instalación Antes de comenzar el armado, instalación u operación del producto, asegúrese de que tiene todas las piezas. Compare las piezas con la lista de contenido. Si alguna de las piezas faltara o estuviera dañada, no proceda a armar, instalar u operar el producto. Comuníquese con el servicio al cliente para consultar por las piezas de reemplazo. NOTA: Guarde el recibo de compra y estas instrucciones como prueba de compra.
Instalación Seleccione un sitio adecuado que soporte el peso del aparato de iluminación. Determine el método de montaja antes de hacer los orificios. ADVERTENCIA: RIESGO DE DESCARGA ELÉCTRICA. Asegúrese de cortar el suministro eléctrico en los cables con los que trabajará. Extraiga los fusibles o apague el cortacircuitos antes de quitar el aparato de iluminación existente o instalar uno nuevo. Antes de retirar el aparato existente, desconecte la energía hacia la caja eléctrica.
Instalación (continuación) 3 Pasar los cables NOTA: Coloque la junta (BB) en uno de los orificios ciegos del aparato para proteger mejor los cables. □□ Pase los cables por uno de los orificios ciegos y a través de la junta (BB), y luego a través del soporte de montaje (AA). La conexión de cables puede mantenerse en el lugar con las pestañas de metal, si es necesario.
Instalación (continuación) 6 Unir la caja al techo □□ Taladre un orifico piloto de 1/8 pulgadas en los sitios de los tornillos marcados en el techo. También puede usar una lezna o clavo para marcar los orificios de los tornillos. □□ Instale un anclaje para picra (DD) y un tornillo de montaje (EE) en cada uno de los orificios, pero no los apriete completamente. □□ Alinee los 2 orificios de montaje en la caja (A) con los 2 tornillos de montaje en el techo.
Cuidado y limpieza PRECAUCIÓN: Antes de limpiar el aparato, desconecte el suministro eléctrico hacia este apagando el cortacircuitos o extrayendo el fusible de la caja de fusibles. □□ Limpie el aparato con un paño suave y seco. □□ No utilice limpiadores con productos químicos, solventes o abrasivos. □□ No use limpiador líquido en las bombillas LED, en la unidad LED ni en los cables que están dentro de del aparato.
¿Preguntas, problemas, piezas faltantes? Antes de devolver el producto a la tienda, llame al Centro de Atención al Cliente de Commercial Electric en el horario de 8 a.m. – 7 p.m., Hora del Este de EE.UU., de lunes a viernes. 9 a.m. – 6 p.m., Hora del Este de EE.UU., el sábado. 1-877-527-0313 HOMEDEPOT.COM Conserve este manual para uso futuro.