Instructions / Assembly

5 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Installation (continued)
3
Feeding the wires
NOTE: Put the gasket (BB) on any knock out hole on the fixture to better protect the wires.
□ Feed the electrical connection wires through any knock out hole, through the gasket (BB), and then through
the mounting bracket (AA). The connection wires can be held in place by the metal tabs, if needed.
4
Making the electrical connections
□ Insert the hot and neutral (black and white)
wires from the electrical box into the wire
connectors of the same color wires from the
housing (A).
□ Insert the grounding wire from the electrical
box into the wire connector attached to the
green wire from the housing (A).
5
Attaching the mounting bracket
to the electrical box
□ Position the wires back inside the electrical box.
□ Mount the mounting bracket (AA) to the electrical
box using the two electrical box screws (CC).
AA
BB
Metal tabs
Knock out holes
AA
CC
Wire
connectors
AA
A
Wire
connectors