User Manual

EN 16
7. Insert the water hoses as far as possible into the inlet (A) and outlet (B) of the water filter,
and fit the retaining clips again.
BA
8. Screw backflow protection unit C onto the water tap.
9. Insert the other end of the water hose that is connected to the water filter inlet to backflow
protection unit C, and secure it with the retaining clip.
10. Open the tap and check for leaks. If leaks occur, repeat steps 7, 8 and 9. If the leak remains,
we recommend that you contact the service centre.
11. Flush the water filter for 5 minutes. Close the tap again.
C
Installation and use of the water supply is not covered by the manufacturer’s warranty for
the refrigerator/freezer or the ice maker. Follow these instructions carefully. This reduces
the risk of water damage.
INSTALLATION AND CONNECTION