Operation Manual

EN 13
CONTROLS
Oven function with pre-heat
You can prepare dishes in the oven in the same way as in a
traditional oven. The microwave is not used. You are advised to
pre-heat the oven to the required temperature before placing food
in the oven.
1. Press the oven button.
'130' flashes in the display.
• Press again (a number of times) on the oven button if you
wish to set another temperature. You can set a temperature
from 130 °C to 220 °C.
• You can use the control dial to select another temperature by
turning the dial.
2. Press the start button.
The selected temperature is now confirmed.
3. Press the start button again to start the pre-heat.
• A double-beep signal indicates when the oven is at
temperature. The set temperature appears in the display.
4. Place the dish in the microwave.
5. Turn the control dial to set the time (maximum 95 minutes).
The display indicates the set time.
• The time can only be set once the pre-heat is ready and the
door has been opened and closed again.
• If no time is set within 5 minutes after pre-heating, the pre-
heating stops and 5 beeps sound. The microwave switches off.
6. Press the start button again.
The microwave switches on and the set time counts down in
the display. The oven symbol flashes in the display.
• When the set time has been reached, the current time
appears again in the display, and you will hear 5 beeps.