Operation Manual

EN 7
Before you begin
• Open the door and remove the packaging material.
• Do not use the microwave oven when it is damaged, but contact
the manufacturer.
• Remove the protection foil from the outside of the microwave oven.
• Clean the inside of the oven and the accessories with a damp cloth.
Do not use abrasive cleaners or any strongly smelling detergents.
• Place the turntable in the middle of the microwave oven with the
indentation for the driving mechanism downwards.
Setting the clock
When the power is first supplied to the microwave oven, you must set
the clock. In the display ‘00:00’ will blink. The clock will work as long as
the microwave oven is connected to the mains.
1. Use the selection buttons to set the time (between 00:00 and
23:59).
After you have set the right time, you will hear a beep and the time
stops blinking. The clock has been set.
Notes
• If you want to change the time later on, you have to press and hold
the clock button. The actual time disappears and then the time will
blink in the display.
• Use the selection buttons to set the time and then press the clock
button again to confirm.
BEFORE USE