Operation Manual

GB 10

Operation

Setting the thermostat

The thermostat automatically regulates the temperature inside the

refrigerator and freezer compartment (if present).

• The normal temperature setting is position 3. At position 0, the

refrigerator is off.

• Set a higher temperature by turning the tuning knob to setting 1 or 2.

• Set a lower temperature by turning the tuning knob to setting 4 or 5.

Caution!

The temperature inside the refrigerator (and freezer) is affected by the

ambient temperature, the temperature of not yet chilled foods and

how often the door is opened. The setting of the thermostat must be

adjusted according to these factors.

If you use the appliance for the first time, only fill it when the desired

temperature is reached.

If the appliance is switched off, you must wait at least 5 minutes before

switching it on again. This prevents damage to the compressor.

Your refrigerator can be equipped with or without freezer.

The refrigerator cools between 4-6ºC. At this setting, the temperature in

the freezer is -18ºC or lower.

There can probably be a foul smell when you switch on the appliance

for the first time. This disappears when the appliance starts cooling.

USE