Operation Manual

26
PREPARATIONS
Before using your appliance
Gashob
Burning in of the enamel
■ The burners cause the saucepan supports
to get extremely hot. In time the enamel on
the support points can burn in. This cannot
be prevented and is not covered by the
guarantee.
Burner caps
■ Check regularly whether the caps of the
burners are properly in position on the
burner depressions. Improper positioning
can make it difficult to light the burners,
give rise to an irregular gas flame, or
damage the burner caps.
Oven
Prepare for use
■ Remove the sticker from the glass panel in
the oven door.
■ Remove the protective foil from stainless
steel doors.
■ Remove all accessories from the oven
and clean them thoroughly using a dish-
washing detergent. Switch on the closed,
empty oven at the maximum temperature
for about thirty minutes, after which the
grilling element should be switched on for
a period of fifteen minutes. Let the oven
cool off and clean it with warm water.
Please note:
When the oven is heated to a high temperature
for the first time, you will smell a “new
appliance” odour. This is to be expected.
Clock (EFG687VWIT and EFG688VRVS)
The “A” symbol flickers if you have not yet
set the time of day.
Setting the time of day
■ There is a 24-hour clock on the display
that indicates the time of day. Press the +
and – keys simultaneously. The point in the
middle of the clock flickers. You can now
set the time of day.
■ Press the –/+ keys until the right time is
reached. Now wait 5 seconds. The time of
day is automatically set.
fig. 1