Operation Manual

303394

• Cooking hobs can be installed into worktops that are 30 to 50

mm thick.

• The kitchen furniture element underneath the hob should not

be ﬁ tted with a drawer. If the kitchen furniture element as a

horizontal partition wall, it should be installed no less than 60

millimeters from the lower surface of the worktop. The space

between the partition wall and the hob must be empty; no

objects should be placed into that gap.

Installation procedure

• The worktop should be installed completely horizontally.

• The cutoff surfaces should be appropriately protected.

• Use the supplied screws [2] to secure the ﬁ xing brackets [1]

to the bottom of the cooker where appropriate holes [3] have

been prepared for this purpose.

• Insert the cooking hob into he cutoff and press it heavily from

above against the worktop.

• For screwing down the ﬁ xing clip it is not allowed to use

screws longer than 6,5 mm.

• Connect the cooking hob to the power mains (see instructions

for connecting a cooking hob on a power network).

1 - Fixing bracket

2 - Screw

3 - Hole

A - Thin worktops

B - Thick worktops

Worktop cutout

dimensions