user manual

SOLARLINKFR370 OWNER’S MANUAL

A six-digit code instructs the radio only to receive an ALERT when the

code is programmed in. There are far too many S.A.M.E and CLC codes

to include them all in this manual. We therefore provide the following

to assist you in looking up the code for your area.

Look up a United States county code at the following web site:

http://www.nws.noaa.gov/nwr/indexnw.htm#sametable

Look up a Canadian CLC code at: http://www.msc-smc.ec.gc.ca/msb/

weatheradio/transmitter/index_e.cfm Your radio can be set for one (SINGL)

to 23 (MULTI) codes, or can be set to receive ALL coded information sent

from any transmitter, if you’re within range. When you set codes, it will only

pick up alerts when you’re in that county or within reception distance of the

signal. ALL, MULTI or SINGLE COUNTY will appear in the lower left side of

the display, depending on how you have set it.

1. In the radio off mode, press <MENU> button shortly and then press

or to enter to “COUTY---ALL/SINGL/MULTI” mode.

2. Press

or button shortly with “ALL”, “SINGL” or “MULTI” ashes,

then press

or button repeatedly to select from the three.

Select “SINGL” if you want to enter a code for a single area.

Select “MULTI” if you want to enter mutiple codes for different areas.

COUNTY --ALL

ALL COUNTY

3. Press or to start inputting county code.

4. Press

or to set rst code digit.

5. Repeat step 3. 4. all the other digits are set.

6. Press the <MENU> button to conrm and exit.

02CODE-----

ALL COUNTY