User Manual

ELITE FIELD OWNER’S MANUAL

• Long press the UP or DOWN button to seek the next

station up or down in frequency

• Press the PRESET button to tune to the next preset

station

Short press the Q.TUNE button to increment quickly up

the frequency range. The Q.TUNE button steps up in

frequency by 1000kHz in FM mode and SW modes and

100kHz in MW (AM) mode. Long press the Q.TUNE button

to continuously increment by the steps noted above.

TUNING IN FM STATIONS

The FM frequency range is from 87.5 to 108 MHz.

Fully extend the telescopic antenna and turn on the radio.

Place the top BANDWIDTH control onto the MONO or

STEREO position. Stereo is needed only when you’re using

headphones and STEREO appears to the bottom left of

the frequency in the display. FM mono has better signal

and noise ratio as well as anti-multiplex interference.

FM MONO/STEREO OPERATION

Rotate band selector to FM position, in FM mode, short

press “MONO/STEREO” button. If the current station is

a stereo station, the LCD displays “Stereo” and “--AUTO-

-”. Short press this button again, it switches to “MONO”.

Quick press this button to switch between “MONO” and

“STEREO”.

RDS/INFO:

The ELITE FIELD Radio supports RDS Data Streaming

while tuning in the FM band. A short press of the RDS