User`s manual

(N.C.)
2. Motion Detection: If a motion is detected in the defined areas, an event
will be triggered.
3. Periodic Timer: An event will be triggered following the schedule of the
pre-defined time interval. For example, if the time
interval is set 60-second, the event will be triggered
once per 60-second.
4. Network Loss: When network loss is detected, an event will be
triggered.
5. Power Loss: When system power loss is detected, and event will be
triggered. The e-mail notification which indicates the time
interval of power loss will be made as powering on.
à Events Handled
1. Digital Output: Activate digital output.
2. E-mail Notification: E-mail can be sent based on occurrence of an event
listed out in “Rule Lists”.
3. Record: When event triggered, system will record streaming to FTP
Server.
à Rule Lists – Adding / Deleting
Select an event and choose its corresponding actions. Press add button and
notice that is added in the Rule lists Information box.
à Modifying Rule Lists
User may press Delete All to delete the items of event rules.
l Date & Time