Product Instructions

Operation EN
16 / 20 04/2020
See in the screen above, the green anchor attesting that the system is working correctly.
When the tool is outside the working space, "E931" is displayed on the tool display. Press OK to quit.
Operating Instructions
Using the Virtual cable solution
The tool is enabled when the operator uses the tool inside the working space.
The tool is disabled if the operator goes outside the working space.
The user info "I931 - Tool locked by Tracking system" is displayed on both CONNECT and tool display. Tap "OK"
to clear the message.
If the tightening is running as the operator goes outside the working space, the tool is by default stopped. This
behaviour can be configured with the parameter "Stop when ongoing tightening is outside working space" avail-
able in Tightening Unit settings in CVI CONFIG and CONNECT.