Safety Information

Safety Information
6 / 8 09/2021
• Refer to the Product Instructions of Tracking base
(printed matter No. 6159925540) available at https://
www.desouttertools.com/resource-centre.
• Tracking base model type:
Tracking base
model type
Tracking base se-
rial number index
Date of produc-
tion
CE only 4900xxxxxxx to
4903xxxxxxx
From index = 0 to
3
Before 2021
CE & FCC 4904xxxxxxx and
later
From index = 4
After 2021
Electrical Safety
WARNING This apparatus must be earthed.
CAUTION Multiple power sources may be present.
Disconnect ALL power sources before servicing.
CAUTION The socket-outlet shall be easily accessi-
ble.
• Earthed equipment must be plugged into a socket
that has been properly installed and earthed accord-
ing to appropriate regulations. Never remove the
earth pin or modify the plug in any way. Do not use
any adapter plugs. Check with a qualified electrician if
you are in any doubt as to whether the outlet is properly
earthed. Should the equipment suffer electronic malfunc-
tion or breakdown, the earth provides a low resistance
path to carry electricity away from the user. Applicable
only to Class I (earthed) equipment.
• Failure to comply with these operating instructions may
impair the safety of this equipment.
• Only use the cord supplied with the controller to connect
to the mains, and the cord supplied with the tool to con-
nect to the controller. Do not modify the cords or use
them for other purposes. Use only genuine replacement
parts.
• Failure to follow these instructions may result in electric
shock.
• Must not be used in explosive atmospheres.
• Avoid physical contact with grounded surfaces such
as pipes, radiators, ovens and refrigerators. There is
an increased risk of electric shock if your body is
grounded.
• Do not expose the equipment to rain or wet condi-
tions. Water entering the equipment will increase the
risk of electric shock. This instruction does not apply to
equipment classified as watertight or splash proof.
• For minimum electrical interference, locate the equip-
ment as far as possible from sources of electrical noise,
e.g. arc welding equipment etc.
• Do not abuse the power lead. Never use the power lead
to carry the equipment or to pull the plug from a socket.
Keep the power lead away from heat, oil, sharp edges or
moving parts. Replace damaged leads immediately.
Damaged leads increase the risk of electric shock.
• When working simultaneously with welding equipment,
the work piece must be earthed separately while welding
is in progress. This is to prevent the return current pass-
ing through the controller earth cables, in case the return
lines for the welding equipment have not been mounted
correctly on the work piece. Desoutter recommends that
earthing be carried out with a conductor area at least as
large as the return line for the welding equipment being
used.
Signs and Stickers
The product is fitted with signs and stickers containing im-
portant information about personal safety and product main-
tenance. The signs and stickers shall always be easy to read.
New signs and stickers can be ordered by using the spare
parts list.
Useful Information
Website
Information concerning our Products, Accessories, Spare
Parts and Published Matters can be found on the Desoutter
website.
Please visit: www.desouttertools.com.
Information about installation manuals
Detailed operating instructions, installation and upgrade
manuals are available at https://www.desouttertools.com/
resource-centre.
Information about spare parts
Exploded views and spare parts lists are available in Service
Link at www.desouttertools.com.
Country of origin
France