Manual

OPERATION COMPLETE
Description: Sets or returns the operation complete enable bit in the
standard event register.
Syntax:
• *OPC x
–or–
• *OPC?
Parameters: Operation complete enable bit (x):
• 0 = disable operation complete function
• 1 = enable operation complete function
Example:
• To enable the operation complete function:
*OPC,1
• To check if the current operation is complete:
*OPC?
If the current operation is complete, the FM5004 will
return:
*OPC,1<CR><LF>
If the current operation is not complete, the FM5004
will return:
*OPC,0<CR><LF>
100 | Remote Operation
Archived 10/19/10