Manual

TRIGGER
Description: Causes the command contained in the define device
trigger buffer to be executed.
The trigger command (TRG) is useful when used along
with a define device trigger (DDT) command to
continuously execute a set of commands. Entering a
TRG as the last command of the DDT string will cause
the DDT command to be repeated continuously until a
different command is sent to break the loop.
The TRG command must be the last command of the
DDT string, otherwise the input buffer will overflow,
causing an error.
Syntax: *TRG
Parameters: None
Example: To cause the command in the define device trigger
buffer to be executed:
*TRG
The response from the FM5004 will be exactly the
same as if the command contained in the define device
trigger buffer were executed directly.
104 | Remote Operation
Archived 10/19/10