Manual

Switch Description
Disp When this LED is illuminated for a selected channel, that channel
is display selected, meaning that the readings from this probe will
be routed to the display. The FM5004 displays the channel input
as a numeric value. To set display mode parameters, use
Menu Select. See Menu Select on page 32 for more information.
Out When this LED is illuminated for a selected channel, that channel
is analog output selected; meaning that the readings from this
probe will be routed to the analog output system. See ANALOG
OUT SETUP on page 42.
X, Y, Z This activates a particular axis on selected channel(s) for display
or analog output. Any combination of axes may be chosen;
isotropic response requires selecting all three axes. When multiple
axes are selected, individual axes are combined vectorially.
Some probes do not allow an individual axis to be disabled.
CHANNEL SELECT SWITCHES
The Channel Select Switches
include Ch-1, Ch-2, Ch-3,
and Ch-4.
These switches are used to
select the input channel.
These switches determine the channel for which the base mode settings apply. A
different base mode may be set up for each channel.
Front Panel Controls and Indicators | 27
Archived 10/19/10