Manual

DISPLAY FORMAT
Example:
• To set the display mode to 2-line format, line 1 to
average of display enabled probes, and line 2 to
analog output reading:
DSFM,1,3,1<LF>
DSFM,2,4,1<LF>
• To verify the line 1 display is set to average of
display selected probes:
DSFM,1,3?<LF>
If it is enabled, the FM5004 will return:
DSFM,1,3,1<CR><LF>
• To set the display mode to 4-probe display format:
DSFM,4,1<LF>
76 | Remote Operation
Archived 10/19/10