Operating instructions

WAGO-Software ETS 11
WAGO ETS Plug-in
Manual
2.0.0
3 ETS
The ETS (Engineering Tool Software) was specially developed for planning,
project design and startup of KNX/EIB networks. During its development, ETS
functionality was optimized and the latest version includes options for setting up,
maintaining, servicing and expanding KNX networks.
The software integrates all the major components of a KNX network such as lines,
devices and building areas into an intuitive, easy-to-use package that enables
controllers and device behaviors to be set up or modified. The software programs
and configures individual devices within the bus system in order to implement
new requirements effectively and quickly.
The manufacturer-independent design of ETS enables manufacturers in the
building automation industry to integrate their devices into the ETS product
database using certified standards. This manual describes devices developed
WAGO Kontakttechnik GmbH & Co. KG.
Additional information
Additional information about ETS can be found on the manufacturer’s website
http://www.konnex.org.
3.1 WAGO ETS Plug-ins
The WAGO ETS Plug-ins described in this document are an extension of the ETS
product database for using WAGO devices such as the KNX/EIB/TP1 Module
(753-646) and the KNX IP Controller (750-889), as well as the KNXnet/IP Router
(consisting of the KNX Module and KNX IP Controller). This extension enables
you to configure WAGO devices via ETS.
The software’s enhanced structure offers intuitive navigation — providing both
new experienced ETS users with exceptional usability.
The key feature of the KNX/EIB/TP1 Module and Controller software is the
ability to map WAGO network variables 1:1 to communication objects in the
ETS.
Communication objects are activated via a checkbox in the “Edit Parameters”
dialog. The communication object is visible in the topology area of the ETS when
this checkbox is checked, and is hidden when the checkbox is unchecked.
Communication objects are given the same name as the network variable they are
mapped to. This ensures that the internal mapping of the WAGO software is also
represented inside ETS.