Operating instructions

WAGO-Software ETS 13

WAGO ETS Plug-in

Manual

2.0.0

3.3 Interworking Datapoint Types (DPTs)

DPTs describe defined formats and data widths of communication objects.

The KNX Module supports the following EIB data widths:

• 1 … 7 bits

• 1 … 4 bytes

• 6 bytes

• 8 bytes

• 10 bytes

• 14 bytes

Additional information about “Interworking Datapoint Types”!

Additional information about “Interworking Datapoint Types” can be found at

http://www.konnex.org.

3.4 Syntax of Network Variable Names

Each network variable name contains the program name. It is preceded and

separated from the actual name by a period.

“Show short name” option

The “Show short name” option in the ETS Plug-in user interface (see Section

“KNX/EIB/TP1 Module/KNX IP Controller” >… > “'View' menu item”) makes it

possible to suppress the display of the program name. This also removes the

prefix, infix (in this case, the “period” character between the basic name and the

suffix) and suffix. The communication objects in the ETS user interface are then

also displayed accordingly in abbreviated form!

3.4.1 Syntax for Simple Variable

The syntax for simple variable names is:

Table 4: Syntax for simple variable

Wildcard

Length

Explanation

<No1>

Digits

KNX Module number

<No2>

3 digits

Data address

3.4.2 Syntax for Array Variables

The syntax for array variable names is:

<Program name>.M<No1>_<No2>_<Basic name>[<No3>]