Operating instructions

22 KNX/EIB/TP1 Module / KNX IP Controller Parameterization WAGO-Software
WAGO ETS Plug-in
Manual
2.0.0
4 KNX/EIB/TP1 Module / KNX IP Controller
Parameterization
The KNX/EIB/TP1 Module (753-646), referred to as the KNX Module, and the
KNX IP Controller (750-889) use the same ETS Plug-in; however, the controller
offers additional functions. This description applies to both the KNX Module and
the Controller. Other functions are described.
The following section describes the procedure for using the ETS Plug-in for the
KNX Module and the KNX IP Controller within the ETS. The ETS Plug-in is
contained in the product database.
4.1 Graphical User Interface of the ETS Plug-in
The graphical user interface displays all relevant data applicable to configuring
the KNX Module.
The main window is divided into various areas, which are described in the
following sections:
Figure 11: Overview of the ETS Plug-in
Table 8: Legend for the “Overview of the ETS Plug-in” figure
Pos.
Description/Section
1
Main Menu
2
Toolbar
3
“Network Variables” tab – List of network variables
4
“Properties” tab
5
Status bar – Percentage bar
6
“Network variables” tab – EIB datatypes
This display structure cannot be changed, although the toolbar and the Properties
window may be shown or hidden above the View menu item in the main menu. It