Operating instructions

24 KNX/EIB/TP1 Module / KNX IP Controller Parameterization WAGO-Software
WAGO ETS Plug-in
Manual
2.0.0
Table 9: “File” menu item
Menu Item
Description
Export
The following submenu items enable you to export the
current configuration.
XML (Backup)
Export as XML file (not a SYM_XML file). All settings of
WAGO devices (assignment of network variables, their
properties, the settings of network variables and the
assignment of communication objects to group addresses,
etc.) are saved as an XML file. This file is used as a backup
or as a template for the ETS Plug-in. When importing this
file, the predefined settings are accepted in the devices and
replace any existing settings.
CSV (editing parameters)
Export as CSV file. The exported ASCII text contains a table
of the network variables visible in the ETS. The first row is
used as the header and contains the property names. Any
additional row corresponds to a network variable. The
property values (table columns) are separated by semicolons.
You can open and edit the exported *.csv file with Excel or a
text editor.
Notes on saving a *.csv file after editing!
Excel cannot save any additional information in
CSV format, such as cell formats, row heights or
column widths. Therefore when saving, confirm
the format warning prompt with “Yes” in order to
retain the *.csv file format!